[PATCH 31/31] scripts/spelling.txt: add "followings" pattern and fix typo instances
From: Masahiro Yamada
Date: Mon Dec 12 2016 - 15:10:10 EST
Fix typos and add the following to the scripts/spelling.txt:
followings||following
While we are here, add a missing colon in the boilerplate in DT
binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt
was fixed as well.
I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
Documentation/DocBook/libata.tmpl | 2 +-
Documentation/acpi/method-tracing.txt | 2 +-
Documentation/blockdev/mflash.txt | 2 +-
Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt | 2 +-
Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 2 +-
Documentation/devicetree/bindings/soc/rockchip/grf.txt | 4 ++--
Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 4 ++--
Documentation/devicetree/bindings/sound/sun4i-codec.txt | 2 +-
Documentation/devicetree/bindings/sound/sun4i-i2s.txt | 4 ++--
Documentation/memory-hotplug.txt | 4 ++--
Documentation/sound/hd-audio/notes.rst | 2 +-
drivers/ata/libata-eh.c | 2 +-
drivers/atm/iphase.c | 2 +-
drivers/atm/iphase.h | 2 +-
drivers/devfreq/devfreq.c | 2 +-
drivers/hwmon/g762.c | 2 +-
drivers/isdn/hardware/eicon/debug.c | 2 +-
drivers/pci/quirks.c | 2 +-
drivers/staging/gs_fpgaboot/gs_fpgaboot.h | 2 +-
drivers/usb/gadget/udc/renesas_usb3.c | 4 ++--
include/linux/kconfig.h | 2 +-
mm/percpu.c | 2 +-
scripts/spelling.txt | 1 +
sound/pci/hda/patch_ca0132.c | 2 +-
sound/ppc/snd_ps3.c | 2 +-
sound/soc/fsl/fsl_asrc.c | 2 +-
26 files changed, 31 insertions(+), 30 deletions(-)
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index d7fcdc5..0320910 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -1020,7 +1020,7 @@ and other resources, etc.
</itemizedlist>
<para>
- Of errors detected as above, the followings are not ATA/ATAPI
+ Of errors detected as above, the following are not ATA/ATAPI
device errors but ATA bus errors and should be handled
according to <xref linkend="excatATAbusErr"/>.
</para>
diff --git a/Documentation/acpi/method-tracing.txt b/Documentation/acpi/method-tracing.txt
index c2505ee..0aba14c 100644
--- a/Documentation/acpi/method-tracing.txt
+++ b/Documentation/acpi/method-tracing.txt
@@ -152,7 +152,7 @@ tracing facility.
Users can enable/disable this debug tracing feature by executing
the following command:
# echo string > /sys/module/acpi/parameters/trace_state
- Where "string" should be one of the followings:
+ Where "string" should be one of the following:
"disable"
Disable the method tracing feature.
"enable"
diff --git a/Documentation/blockdev/mflash.txt b/Documentation/blockdev/mflash.txt
index 1f610ec..f7e0505 100644
--- a/Documentation/blockdev/mflash.txt
+++ b/Documentation/blockdev/mflash.txt
@@ -17,7 +17,7 @@ driver and currently works well under standard IDE subsystem. Actually it's
one chip SSD. IO mode is ATA-like custom mode for the host that doesn't have
IDE interface.
-Followings are brief descriptions about IO mode.
+Following are brief descriptions about IO mode.
A. IO mode based on ATA protocol and uses some custom command. (read confirm,
write confirm)
B. IO mode uses SRAM bus interface.
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index 7aa840c..ae4234c 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -1,7 +1,7 @@
* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
Required properties:
-- compatible: could be one of the followings
+- compatible: could be one of the following:
"marvell,armada-370-neta"
"marvell,armada-xp-neta"
"marvell,armada-3700-neta"
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index de1378b..c931fb1 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on
the pins includes drive strength and pull-up.
Required properties:
-- compatible: Should be one of the followings (depending on you SoC):
+- compatible: Should be one of the following (depending on your SoC):
"allwinner,sun4i-a10-pinctrl"
"allwinner,sun5i-a10s-pinctrl"
"allwinner,sun5i-a13-pinctrl"
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
index 013e71a..76d6ccf6 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
@@ -9,14 +9,14 @@ From RK3368 SoCs, the GRF is divided into two sections,
Required Properties:
-- compatible: GRF should be one of the followings
+- compatible: GRF should be one of the following:
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3228-grf", "syscon": for rk3228
- "rockchip,rk3288-grf", "syscon": for rk3288
- "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399
-- compatible: PMUGRF should be one of the followings
+- compatible: PMUGRF should be one of the following:
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- reg: physical base address of the controller and length of memory mapped
diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 4ea29aa..a6600f6 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
Required properties:
-- compatible: should be one of the followings
+- compatible: should be one of the following:
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
@@ -17,7 +17,7 @@ Required properties:
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
index 3033bd8..3863531 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@@ -14,7 +14,7 @@ Required properties:
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry
in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
- "apb": the parent APB clock for this controller
- "codec": the parent module clock
diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
index 7b526ec..7a2c094 100644
--- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt
@@ -5,7 +5,7 @@ audio data transfer between devices in the system.
Required properties:
-- compatible: should be one of the followings
+- compatible: should be one of the following:
- "allwinner,sun4i-a10-i2s"
- reg: physical base address of the controller and length of memory mapped
region.
@@ -14,7 +14,7 @@ Required properties:
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
-- clock-names: should contain followings:
+- clock-names: should contain the following:
- "apb" : clock for the I2S bus interface
- "mod" : module clock for the I2S controller
- #sound-dai-cells : Must be equal to 0
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 5de846d..670f3de 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -114,11 +114,11 @@ config options.
Memory model -> Sparse Memory (CONFIG_SPARSEMEM)
Allow for memory hot-add (CONFIG_MEMORY_HOTPLUG)
-- To enable memory removal, the followings are also necessary
+- To enable memory removal, the following are also necessary
Allow for memory hot remove (CONFIG_MEMORY_HOTREMOVE)
Page Migration (CONFIG_MIGRATION)
-- For ACPI memory hotplug, the followings are also necessary
+- For ACPI memory hotplug, the following are also necessary
Memory hotplug (under ACPI Support menu) (CONFIG_ACPI_HOTPLUG_MEMORY)
This option can be kernel module.
diff --git a/Documentation/sound/hd-audio/notes.rst b/Documentation/sound/hd-audio/notes.rst
index 168d0cf..9eeb9b4 100644
--- a/Documentation/sound/hd-audio/notes.rst
+++ b/Documentation/sound/hd-audio/notes.rst
@@ -697,7 +697,7 @@ If it's a regression, at best, send alsa-info outputs of both working
and non-working kernels. This is really helpful because we can
compare the codec registers directly.
-Send a bug report either the followings:
+Send a bug report either the following:
kernel-bugzilla
https://bugzilla.kernel.org/
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0e1ec37..01ba149 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2033,7 +2033,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
* This is to expedite speed down decisions right after device is
* initially configured.
*
- * The followings are speed down rules. #1 and #2 deal with
+ * The following are speed down rules. #1 and #2 deal with
* DUBIOUS errors.
*
* 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index b275676..b3ae034 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -21,7 +21,7 @@
supports a variety of varients of Interphase ATM PCI (i)Chip adapter
card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
in terms of PHY type, the size of control memory and the size of
- packet memory. The followings are the change log and history:
+ packet memory. The following are the change log and history:
Bugfix the Mona's UBR driver.
Modify the basic memory allocation and dma logic.
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index 53ecac5..2beacf2 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -21,7 +21,7 @@
supports a variety of varients of Interphase ATM PCI (i)Chip adapter
card family (See www.iphase.com/products/ClassSheet.cfm?ClassID=ATM)
in terms of PHY type, the size of control memory and the size of
- packet memory. The followings are the change log and history:
+ packet memory. The following are the change log and history:
Bugfix the Mona's UBR driver.
Modify the basic memory allocation and dma logic.
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index a324801..97b0a91 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -1208,7 +1208,7 @@ static int __init devfreq_init(void)
subsys_initcall(devfreq_init);
/*
- * The followings are helper functions for devfreq user device drivers with
+ * The following are helper functions for devfreq user device drivers with
* OPP framework.
*/
diff --git a/drivers/hwmon/g762.c b/drivers/hwmon/g762.c
index b96a2a9..1dbc336 100644
--- a/drivers/hwmon/g762.c
+++ b/drivers/hwmon/g762.c
@@ -858,7 +858,7 @@ static ssize_t set_fan_pulses(struct device *dev,
* (i.e. closed or open-loop).
*
* Following documentation about hwmon's sysfs interface, a pwm1_enable node
- * should accept followings:
+ * should accept the following:
*
* 0 : no fan speed control (i.e. fan at full speed)
* 1 : manual fan speed control enabled (use pwm[1-*]) (open-loop)
diff --git a/drivers/isdn/hardware/eicon/debug.c b/drivers/isdn/hardware/eicon/debug.c
index 576b7b4..8bc2791 100644
--- a/drivers/isdn/hardware/eicon/debug.c
+++ b/drivers/isdn/hardware/eicon/debug.c
@@ -2049,7 +2049,7 @@ static int diva_dbg_cmp_key(const char *ref, const char *key) {
/*
In case trace filter starts with "C" character then
all following characters are interpreted as command.
- Followings commands are available:
+ Following commands are available:
- single, trace single call at time, independent from CPN/CiPN
*/
static int diva_mnt_cmp_nmbr(const char *nmbr) {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 9236e40..0512fdd 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3606,7 +3606,7 @@ static int __init pci_apply_final_quirks(void)
fs_initcall_sync(pci_apply_final_quirks);
/*
- * Followings are device-specific reset methods which can be used to
+ * Following are device-specific reset methods which can be used to
* reset a single function if other methods (e.g. FLR, PM D0->D3) are
* not available.
*/
diff --git a/drivers/staging/gs_fpgaboot/gs_fpgaboot.h b/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
index 7b8cc3a..cd1eb2c 100644
--- a/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
+++ b/drivers/staging/gs_fpgaboot/gs_fpgaboot.h
@@ -39,7 +39,7 @@ struct fpgaimage {
const struct firmware *fw_entry;
/*
- * the followings can be read from bitstream,
+ * the following can be read from bitstream,
* but other image format should have as well
*/
char filename[MAX_STR];
diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index fb8fc34..2218f91 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -1791,7 +1791,7 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev,
dev_dbg(dev, "%s: num_usb3_eps = %d\n", __func__, usb3->num_usb3_eps);
/*
- * This driver prepares pipes as the followings:
+ * This driver prepares pipes as follows:
* - odd pipes = IN pipe
* - even pipes = OUT pipe (except pipe 0)
*/
@@ -1841,7 +1841,7 @@ static void renesas_usb3_init_ram(struct renesas_usb3 *usb3, struct device *dev,
memset(basead, 0, sizeof(basead));
/*
- * This driver prepares pipes as the followings:
+ * This driver prepares pipes as follows:
* - all pipes = the same size as "ramsize_per_pipe"
* Please refer to the "Method of Specifying RAM Mapping"
*/
diff --git a/include/linux/kconfig.h b/include/linux/kconfig.h
index 8f2e059..4d74860 100644
--- a/include/linux/kconfig.h
+++ b/include/linux/kconfig.h
@@ -8,7 +8,7 @@
/*
* The use of "&&" / "||" is limited in certain expressions.
- * The followings enable to calculate "and" / "or" with macro expansion only.
+ * The following enable to calculate "and" / "or" with macro expansion only.
*/
#define __and(x, y) ___and(x, y)
#define ___and(x, y) ____and(__ARG_PLACEHOLDER_##x, y)
diff --git a/mm/percpu.c b/mm/percpu.c
index 0686f56..5696039 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -43,7 +43,7 @@
* Chunks can be determined from the address using the index field
* in the page struct. The index field contains a pointer to the chunk.
*
- * To use this allocator, arch code should do the followings.
+ * To use this allocator, arch code should do the following:
*
* - define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() to translate
* regular address to percpu pointer and back if they need to be
diff --git a/scripts/spelling.txt b/scripts/spelling.txt
index 5fb27d2..78406db 100644
--- a/scripts/spelling.txt
+++ b/scripts/spelling.txt
@@ -457,6 +457,7 @@ finsih||finish
flusing||flushing
folloing||following
followign||following
+followings||following
follwing||following
forseeable||foreseeable
forse||force
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 11b9b2f..bd7c29f 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -2863,7 +2863,7 @@ static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info,
#define CA0132_CODEC_MUTE(xname, nid, dir) \
CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir)
-/* The followings are for tuning of products */
+/* The following are for tuning of products */
#ifdef ENABLE_TUNING_CONTROLS
static unsigned int voice_focus_vals_lookup[] = {
diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index b84d7d3..cdd44ab 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -883,7 +883,7 @@ static void snd_ps3_audio_set_base_addr(uint64_t ioaddr_start)
static void snd_ps3_audio_fixup(struct snd_ps3_card_info *card)
{
/*
- * avsetting driver seems to never change the followings
+ * avsetting driver seems to never change the following
* so, init them here once
*/
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 1d82f68..8cfffa7 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -368,7 +368,7 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
fsl_asrc_set_watermarks(pair, ASRC_INPUTFIFO_THRESHOLD,
ASRC_INPUTFIFO_THRESHOLD);
- /* Configure the followings only for Ideal Ratio mode */
+ /* Configure the following only for Ideal Ratio mode */
if (!ideal)
return 0;
--
2.7.4