[PATCH v2 9/9] NTB: Add ntb.h comments
From: Serge Semin
Date: Mon Dec 12 2016 - 16:09:32 EST
Signed-off-by: Serge Semin <fancer.lancer@xxxxxxxxx>
---
include/linux/ntb.h | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index fe0437c..c5a369c 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -312,13 +312,18 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
{
/* commented callbacks are not required: */
return
+ /* Port operations are required */
ops->port_number &&
ops->peer_port_count &&
ops->peer_port_number &&
ops->peer_port_idx &&
+
+ /* Link operations are requiered */
ops->link_is_up &&
ops->link_enable &&
ops->link_disable &&
+
+ /* One or both MW interfaces should be developed */
ops->mw_count &&
ops->mw_get_align &&
(ops->mw_set_trans ||
@@ -328,12 +333,11 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
ops->peer_mw_get_addr &&
/* ops->peer_mw_clear_trans && */
+ /* Doorbell operations are mostly required */
/* ops->db_is_unsafe && */
ops->db_valid_mask &&
-
/* both set, or both unset */
(!ops->db_vector_count == !ops->db_vector_mask) &&
-
ops->db_read &&
/* ops->db_set && */
ops->db_clear &&
@@ -347,6 +351,8 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
/* ops->peer_db_read_mask && */
/* ops->peer_db_set_mask && */
/* ops->peer_db_clear_mask && */
+
+ /* Scrachpad interface is optional */
/* !ops->spad_is_unsafe == !ops->spad_count && */
!ops->spad_read == !ops->spad_count &&
!ops->spad_write == !ops->spad_count &&
@@ -354,6 +360,7 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
/* !ops->peer_spad_read == !ops->spad_count && */
!ops->peer_spad_write == !ops->spad_count &&
+ /* Message registers interface is optional */
!ops->msg_inbits == !ops->msg_count &&
!ops->msg_outbits == !ops->msg_count &&
!ops->msg_read_sts == !ops->msg_count &&
@@ -374,13 +381,12 @@ struct ntb_client {
struct device_driver drv;
const struct ntb_client_ops ops;
};
-
#define drv_ntb_client(__drv) container_of((__drv), struct ntb_client, drv)
/**
* struct ntb_device - ntb device
* @dev: Linux device object.
- * @pdev: Pci device entry of the ntb.
+ * @pdev: PCI device entry of the ntb.
* @topo: Detected topology of the ntb.
* @ops: See &ntb_dev_ops.
* @ctx: See &ntb_ctx_ops.
@@ -401,7 +407,6 @@ struct ntb_dev {
/* block unregister until device is fully released */
struct completion released;
};
-
#define dev_ntb(__dev) container_of((__dev), struct ntb_dev, dev)
/**
@@ -498,7 +503,7 @@ void ntb_link_event(struct ntb_dev *ntb);
* multiple interrupt vectors for doorbells, the vector number indicates which
* vector received the interrupt. The vector number is relative to the first
* vector used for doorbells, starting at zero, and must be less than
- ** ntb_db_vector_count(). The driver may call ntb_db_read() to check which
+ * ntb_db_vector_count(). The driver may call ntb_db_read() to check which
* doorbell bits need service, and ntb_db_vector_mask() to determine which of
* those bits are associated with the vector number.
*/
--
2.6.6