regression, 4.8.10 -> 4.9.0 totally fail on NUMA machine, ACPI issue?
From: Denys Fedoryshchenko
Date: Mon Dec 12 2016 - 22:43:16 EST
Hi,
Just attempted to upgrade from 4.8.10 to 4.9.10 with minimal kernel
changes (oldconfig, but then attempted to add few options to solve
problem (such as adding NR_CPUS and PCI options, didnt helped).
My filesystem are residing on USB drive, and USB where flash are located
is not working, so i am able to get only early kernel messages over
netconsole. Also this server is semi-production,
and remote, so i can't do much tests on it (only at night).
Hardware:
2x E5-2640 v3
Motherboard: S2600WTT
RAM: 384GB (not sure)
Here is diff of kernel messages:
--- x0c 2016-12-13 04:37:04.245892429 +0200
+++ x1c 2016-12-13 04:45:23.976088816 +0200
@@ -1,5 +1,5 @@
-version 4.8.10-build-0121 (root@dev) (gcc version 5.4.0 (Gentoo 5.4.0
p1.0, pie-0.6.5) ) #10 SMP Thu Nov 24 01:05:28 UTC 2016
-line: BOOT_IMAGE=kernel panic=1 intel_idle.max_cstate=0
processor.max_cstate=1
+version 4.9.0-build-0123 (root@dev) (gcc version 5.4.0 (Gentoo 5.4.0
p1.0, pie-0.6.5) ) #3 SMP Tue Dec 13 02:07:57 UTC 2016
+line: BOOT_IMAGE=kernelup panic=1 intel_idle.max_cstate=0
processor.max_cstate=1
Supporting XSAVE feature 0x001: 'x87 floating point registers'
Supporting XSAVE feature 0x002: 'SSE registers'
Supporting XSAVE feature 0x004: 'AVX registers'
@@ -249,36 +249,36 @@
INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI (MADT) for SMP configuration information
HPET id: 0x8086a701 base: 0xfed00000
-144 Processors exceeds NR_CPUS limit of 64
-Allowing 64 CPUs, 32 hotplug CPUs
+Allowing 32 CPUs, 0 hotplug CPUs
[mem 0x90000000-0xfed1bfff] available for PCI devices
refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
1910969940391419 ns
-NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
-Embedded 33 pages/cpu @ffff882fbf600000 s95320 r8192 d31656 u262144
+NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:2
+Embedded 33 pages/cpu @ffff882fbfa00000 s95512 r8192 d31464 u262144
2 zonelists in Node order, mobility grouping on. Total pages: 99066449
zone: Normal
-command line: BOOT_IMAGE=kernel panic=1 intel_idle.max_cstate=0
processor.max_cstate=1
+command line: BOOT_IMAGE=kernelup panic=1 intel_idle.max_cstate=0
processor.max_cstate=1
individual max cpu contribution: 4096 bytes
-total cpu_extra contributions: 258048 bytes
+total cpu_extra contributions: 126976 bytes
min size: 32768 bytes
-524288 bytes
-log buf free: 11976(36%)
+262144 bytes
+log buf free: 12212(37%)
hash table entries: 4096 (order: 3, 32768 bytes)
-396163212K/402555824K available (9082K kernel code, 730K rwdata, 4528K
rodata, 8024K init, 416K bss, 6392612K reserved, 0K cma-reserved)
-HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
+396167976K/402555824K available (9238K kernel code, 746K rwdata, 4564K
rodata, 8016K init, 416K bss, 6387848K reserved, 0K cma-reserved)
+HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
RCU implementation.
adjustment of leaf fanout to 64.
-nr_irqs:1752 16
+restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
+Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
+nr_irqs:1496 16
colour VGA+ 80x25
[tty0] enabled
hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
133484882848 ns
Fast TSC calibration using PIT
-Detected 2593.948 MHz processor
-delay loop (skipped), value calculated using timer frequency.. 5187.89
BogoMIPS (lpj=2593948)
-default: 65536 minimum: 512
-Core revision 20160422
+Detected 2593.955 MHz processor
+delay loop (skipped), value calculated using timer frequency.. 5187.91
BogoMIPS (lpj=2593955)
+default: 32768 minimum: 301
+Core revision 20160831
4 ACPI AML tables successfully acquired and loaded
-
Framework initialized
cache hash table entries: 67108864 (order: 17, 536870912 bytes)
hash table entries: 33554432 (order: 16, 268435456 bytes)
@@ -293,246 +293,31 @@
using mwait in idle threads
level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
-SMP alternatives memory: 32K (ffffffff8288e000 - ffffffff82896000)
+SMP alternatives memory: 32K (ffffffff82890000 - ffffffff82898000)
APIC(0) Converting physical 0 to logical package 0
APIC(10) Converting physical 1 to logical package 1
-fast init done
-Max logical packages: 18
-APIC routing to physical flat.
-vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
-CPU0: Intel(R) Xeon(R) CPU E5-2640 v3 @ 2.60GHz (family: 0x6, model:
0x3f, stepping: 0x2)
-Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters,
Intel PMU driver.
-version: 3
-bit width: 48
-generic registers: 4
-value mask: 0000ffffffffffff
-max period: 0000ffffffffffff
-fixed-purpose events: 3
-event mask: 000000070000000f
-watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
-Booting SMP configuration:
-node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
-node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15
-node #0, CPUs: #16 #17 #18 #19 #20 #21 #22 #23
-node #1, CPUs: #24 #25 #26 #27 #28 #29 #30 #31
-Booted up 2 nodes, 32 CPUs
-Total of 32 processors activated (166233.39 BogoMIPS)
-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
1911260446275000 ns
-Registered protocol family 16
-using governor ladder
-using governor menu
-FADT declares the system doesn't support PCIe ASPM, so disable it
-bus type PCI registered
-MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff]
(base 0x80000000)
-MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
-Using configuration type 1 for base access
-PMU erratum BJ122, BV98, HSD29 worked around, HT is on
-Added _OSI(Module Device)
-Added _OSI(Processor Device)
-Added _OSI(3.0 _SCP Extensions)
-Added _OSI(Processor Aggregator Device)
-Executed 1 blocks of module-level executable AML code
-[Firmware Bug]: BIOS _OSI(Linux) query ignored
-Dynamic OEM Table Load:
-PRAD 0x0000000000000000 000102 (v02 INTEL SpsPrAgg 00000002 INTL
20130328)
-Interpreter enabled
-(supports S0 S5)
-Using IOAPIC for interrupt routing
-Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
-PCI Root Bridge [UNC1] (domain 0000 [bus ff])
-PNP0A03:02: _OSC: OS supports [ExtendedConfig Segments MSI]
-PNP0A03:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
-host bridge to bus 0000:ff
-0000:ff: root bus resource [bus ff]
-PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
-PNP0A03:03: _OSC: OS supports [ExtendedConfig Segments MSI]
-PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
-host bridge to bus 0000:7f
-0000:7f: root bus resource [bus 7f]
-PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
-PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
-PNP0A08:00: _OSC: not requesting OS control; OS requires
[ExtendedConfig ASPM ClockPM MSI]
-PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff
window] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
-host bridge to bus 0000:00
-0000:00: root bus resource [io 0x0000-0x0cf7 window]
-0000:00: root bus resource [io 0x1000-0x7fff window]
-0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
-0000:00: root bus resource [mem 0x90000000-0xc7ffbfff window]
-0000:00: root bus resource [mem 0x380000000000-0x383fffffffff window]
-0000:00: root bus resource [bus 00-7e]
-0000:00:01.0: PCI bridge to [bus 01]
-0000:00:02.0: PCI bridge to [bus 02]
-0000:03:00.0: VF(n) BAR0 space: [mem 0x91900000-0x919fffff 64bit]
(contains BAR0 for 64 VFs)
-0000:03:00.0: VF(n) BAR3 space: [mem 0x91a00000-0x91afffff 64bit]
(contains BAR3 for 64 VFs)
-0000:03:00.1: VF(n) BAR0 space: [mem 0x91b00000-0x91bfffff 64bit]
(contains BAR0 for 64 VFs)
-0000:03:00.1: VF(n) BAR3 space: [mem 0x91c00000-0x91cfffff 64bit]
(contains BAR3 for 64 VFs)
-0000:00:02.2: PCI bridge to [bus 03-04]
-0000:00:03.0: PCI bridge to [bus 05]
+Max logical packages: 4
0000:00:03.2: PCI bridge to [bus 06]
0000:00:1c.0: PCI bridge to [bus 07]
PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
-PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
-PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
-PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
-PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
-PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
-PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
-PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
-PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI]
-PNP0A08:01: _OSC: not requesting OS control; OS requires
[ExtendedConfig ASPM ClockPM MSI]
-host bridge to bus 0000:80
-0000:80: root bus resource [io 0x03b0-0x03df window]
-0000:80: root bus resource [mem 0x000a0000-0x000bffff window]
-0000:80: root bus resource [io 0x8000-0xffff window]
-0000:80: root bus resource [mem 0xc8000000-0xfbffbfff window]
-0000:80: root bus resource [mem 0x384000000000-0x387fffffffff window]
-0000:80: root bus resource [bus 80-fe]
-0000:81:00.0: VF(n) BAR0 space: [mem 0xc8000000-0xc80fffff 64bit]
(contains BAR0 for 64 VFs)
-0000:81:00.0: VF(n) BAR3 space: [mem 0xc8100000-0xc81fffff 64bit]
(contains BAR3 for 64 VFs)
-0000:81:00.1: VF(n) BAR0 space: [mem 0xc8200000-0xc82fffff 64bit]
(contains BAR0 for 64 VFs)
-0000:81:00.1: VF(n) BAR3 space: [mem 0xc8300000-0xc83fffff 64bit]
(contains BAR3 for 64 VFs)
-0000:80:01.0: PCI bridge to [bus 81-82]
-Enabled 4 GPEs in block 00 to 3F
-subsystem initialized
-bus type USB registered
-registered new interface driver usbfs
-registered new interface driver hub
-registered new device driver usb
LinuxPPS API ver. 1 registered
Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<giometti@xxxxxxxx>
clock support registered
Using ACPI for IRQ routing
at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
-8 comparators, 64-bit 14.318180 MHz counter
-Switched to clocksource hpet
-PnP ACPI init
-00:01: [io 0x0500-0x053f] has been reserved
-00:01: [io 0x0400-0x047f] has been reserved
-00:01: [io 0x0540-0x057f] has been reserved
-00:01: [io 0x0600-0x061f] has been reserved
-00:01: [io 0x0ca0-0x0ca5] has been reserved
-00:01: [io 0x0880-0x0883] has been reserved
-00:01: [io 0x0800-0x081f] has been reserved
-00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
-00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
-00:01: [mem 0xff000000-0xffffffff] could not be reserved
-00:01: [mem 0xfee00000-0xfeefffff] has been reserved
-00:01: [mem 0xfed12000-0xfed1200f] has been reserved
-00:01: [mem 0xfed12010-0xfed1201f] has been reserved
-00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
-PnP ACPI: found 4 devices
-acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024
ns
-0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no
compatible bridge window
-0000:00:01.0: PCI bridge to [bus 01]
-0000:00:02.0: PCI bridge to [bus 02]
-0000:00:02.2: PCI bridge to [bus 03-04]
-0000:00:02.2: bridge window [io 0x2000-0x2fff]
-0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff]
-0000:00:02.2: bridge window [mem 0x383fffa00000-0x383fffefffff 64bit
pref]
0000:00:03.0: PCI bridge to [bus 05]
-0000:00:03.2: PCI bridge to [bus 06]
-0000:07:00.0: BAR 6: assigned [mem 0x91810000-0x9181ffff pref]
-0000:00:1c.0: PCI bridge to [bus 07]
-0000:00:1c.0: bridge window [mem 0x91000000-0x918fffff]
-0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
-0000:80:01.0: PCI bridge to [bus 81-82]
-0000:80:01.0: bridge window [io 0x8000-0x8fff]
-0000:80:01.0: bridge window [mem 0xc8000000-0xc83fffff]
-0000:80:01.0: bridge window [mem 0x387fffd00000-0x387fffefffff 64bit
pref]
-Registered protocol family 2
-established hash table entries: 524288 (order: 10, 4194304 bytes)
-bind hash table entries: 65536 (order: 8, 1048576 bytes)
-Hash tables configured (established 524288 bind 65536)
-hash table entries: 65536 (order: 9, 2097152 bytes)
-hash table entries: 65536 (order: 9, 2097152 bytes)
-Registered protocol family 1
-0000:07:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
-Using software bounce buffering for IO (SWIOTLB)
-IO TLB [mem 0x72279000-0x76279000] (64MB) mapped at
[ffff880072279000-ffff880076278fff]
-CQM monitoring enabled
-PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
-PMU: hw unit of domain pp0-core 2^-14 Joules
-PMU: hw unit of domain package 2^-14 Joules
-PMU: hw unit of domain dram 2^-14 Joules
-PMU: hw unit of domain pp1-gpu 2^-14 Joules
-hash table entries: 16384 (order: 8, 1048576 bytes)
-system trusted keyrings
-timestamp_bits=59 max_order=27 bucket_order=0
-version 4.0 (2009/01/31) Phillip Lougher
-Registered protocol family 38
-type asymmetric registered
-key parser 'x509' registered
-layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
-scheduler noop registered
-scheduler cfq registered (default)
-ACPI: processor limited to max C-state 1
-8250/16550 driver, 4 ports, IRQ sharing disabled
-ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
-ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
-module loaded
-iSCSI transport class v2.0-870.
-Cisco FCoE HBA Driver, ver 1.6.0.21
-Successfully Initialized Trace Buffer
-Successfully Initialized FC_CTLR Trace Buffer
-QLogic FCoE Driver bnx2fc v2.10.3 (October 15, 2015)
-Adaptec I2O RAID: Version 2.4 Build 5go
-Adaptec I2O RAID controllers...
-aacraid driver 1.2-1[41066]-ms
-Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
-Intel(R) C600 SAS Controller Driver - version 1.2.0
-<fdomain> Detection failed (no card)
-[0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k.
-registered transport (qla4xxx)
-iSCSI HBA Driver
-LightPulse Fibre Channel SCSI driver 11.2.0.0.
-2004-2016 Emulex. All rights reserved.
-BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0
-Chelsio FCoE driver 1.0.0
-cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
-2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
-06.811.02.00-rc1
-version 13.100.00.00 loaded
-Storage Controller device driver for Linux v1.26.02.003.
-9000 Storage Controller device driver for Linux v2.26.02.014.
-3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
-IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
-3xxx/4xxx Controller driver v1.10.0
-Promise SuperTrak EX Driver version: 5.00.0000.01
-registered transport (be2iscsi)
-beiscsi_module_init, tt=ffffffff820867e0
-PVSCSI driver - version 1.0.6.0-k
-0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
0000:00:11.4: flags: 64bit ncq led clo pio slum part ems apst
-host0: ahci
-host1: ahci
-host2: ahci
-host3: ahci
-SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00100 irq 26
-SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00180 irq 26
-SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00200 irq 26
-SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00280 irq 26
+SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00180 irq 33
0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA
mode
-0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
-host4: ahci
-host5: ahci
host6: ahci
-host7: ahci
-host8: ahci
host9: ahci
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04100 irq 27
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04180 irq 27
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04200 irq 27
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04280 irq 27
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04300 irq 27
-SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04380 irq 27
+SATA max UDMA/133 abar m2048@0x91d04000 port 0x91d04200 irq 34
pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx
-L2 Ethernet Driver - version 2.2.3
-(c) 2007 Atheros Corporation.
QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0
(2014/02/10)
-Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
-Intel(R) PRO/1000 Network Driver - 3.2.6-k
-Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
+Copyright (c) 1999-2006 Intel Corporation.
+1-0:1.0: USB hub found
+1-0:1.0: 2 ports detected
0000:00:1d.0: EHCI Host Controller
0000:00:1d.0: new USB bus registered, assigned bus number 2
0000:00:1d.0: debug port 2
@@ -541,69 +326,19 @@
usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb2: Product: EHCI Host Controller
-usb2: Manufacturer: Linux 4.8.10-build-0121 ehci_hcd
-usb2: SerialNumber: 0000:00:1d.0
-2-0:1.0: USB hub found
-2-0:1.0: 2 ports detected
-EHCI generic platform driver
-USB 1.1 'Open' Host Controller (OHCI) Driver
-OHCI PCI platform driver
-OHCI generic platform driver
-USB Universal Host Controller Interface driver
-registered new interface driver uas
-registered new interface driver usb-storage
-PNP: No PS/2 controller found. Probing ports directly.
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-SATA link down (SStatus 0 SControl 300)
-1-1: new high-speed USB device number 2 using ehci-pci
-1-1:1.0: USB hub found
-2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
-Can't read CTR while initializing i8042
-00:00: RTC can wake from S4
-ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
-registered new interface driver usbhid
-type dns_resolver registered
-version of gcm_enc/dec engaged.
-taskstats version 1
-0003:046B:FF10.0001: input: USB HID v1.10 Keyboard [American Megatrends
Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.5/input0
-American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:046B:FF10.0002/input/input1
-0003:046B:FF10.0002: input: USB HID v1.10 Mouse [American Megatrends
Inc. Virtual Keyboard and Mouse] on usb-0000:00:1d.0-1.5/input1
-10:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6
-10:0:0:0: [sda] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB)
-10:0:0:0: [sda] Write Protect is off
-10:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't
support DPO or FUA
-sda1
-10:0:0:0: [sda] Attached SCSI removable disk
-Switched to clocksource tsc
-(sda1): recovery complete
-Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
-0000:03:00.0: Multiqueue Enabled: Rx Queue count = 32, Tx Queue count =
32
-0000:03:00.0: Intel(R) 10 Gigabit Network Connection
-0000:03:00.1: MAC: 3, PHY: 0, PBA No: 000000-000
-0000:81:00.0 0000:81:00.0 (uninitialized): WARNING: Intel (R) Network
Connections are quality tested using Intel (R) Ethernet Optics. Using
untested modules is not supported and may cause unstable operation or
damage to the module or the adapter. Intel Corporation is not
responsible for any harm caused by using untested modules.
-0000:81:00.1 0000:81:00.1 (uninitialized): WARNING: Intel (R) Network
Connections are quality tested using Intel (R) Ethernet Optics. Using
untested modules is not supported and may cause unstable operation or
damage to the module or the adapter. Intel Corporation is not
responsible for any harm caused by using untested modules.
-0000:81:00.1: Multiqueue Enabled: Rx Queue count = 32, Tx Queue count =
32
-0000:81:00.1: PCI Express bandwidth of 32GT/s available
-0000:81:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%)
-0000:81:00.1: MAC: 2, PHY: 17, SFP+: 6, PBA No: E68793-006
-0000:81:00.1: 90:e2:ba:7e:99:f9
-0000:81:00.1: Intel(R) 10 Gigabit Network Connection
-0000:81:00.1: registered PHC device on eth3
0000:81:00.1 eth3: WARNING: Intel (R) Network Connections are quality
tested using Intel (R) Ethernet Optics. Using untested modules is not
supported and may cause unstable operation or damage to the module or
the adapter. Intel Corporation is not responsible for any harm caused by
using untested modules.
Channel Bonding Driver: v3.7.1 (April 27, 2011)
0000:81:00.1 eth3: detected SFP+: 6
-Setting xmit hash policy to layer3+4 (1)
-0000:81:00.0 eth2: detected SFP+: 5
0000:81:00.0: registered PHC device on eth2
-0000:81:00.1: removed PHC on eth3
+Setting xmit hash policy to layer3+4 (1)
0000:81:00.0 eth2: WARNING: Intel (R) Network Connections are quality
tested using Intel (R) Ethernet Optics. Using untested modules is not
supported and may cause unstable operation or damage to the module or
the adapter. Intel Corporation is not responsible for any harm caused by
using untested modules.
+Warning: No 802.3ad response from the link partner for any adapters in
the bond
+0000:81:00.1 eth3: NIC Link is Up 10 Gbps, Flow Control: RX/TX
+netconsole: local port 4444
+netconsole: remote port 514
[netcon0] enabled
network logging started
+(C) 2000-2006 Netfilter Core Team
+version 0.5.0 (65536 buckets, 262144 max)
+messages via NETLINK v0.30.
+protocol 6
Full kernel message of new kernel:
[ 0.000000] Linux version 4.9.0-build-0123 (root@dev) (gcc version
5.4.0 (Gentoo 5.4.0 p1.0, pie-0.6.5) ) #3 SMP Tue Dec 13 02:07:57 UTC
2016
[ 0.000000] Command line: BOOT_IMAGE=kernelup panic=1
intel_idle.max_cstate=0 processor.max_cstate=1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is
832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000076278fff]
usable
[ 0.000000] BIOS-e820: [mem 0x0000000076279000-0x0000000076325fff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000076326000-0x000000007a1d2fff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000007a1d3000-0x000000007accefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x000000007accf000-0x000000007b6fefff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b6ff000-0x000000007b7d5fff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007b7d6000-0x000000007b7fffff]
usable
[ 0.000000] BIOS-e820: [mem 0x000000007b800000-0x000000008fffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000607fffffff]
usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] e820: last_pfn = 0x6080000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC
UC- WT
[ 0.000000] e820: last_pfn = 0x7b800 max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0460 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x000000007B7D40E8 00008C (v01 INTEL S2600WT
00000000 INTL 01000013)
[ 0.000000] ACPI: FACP 0x000000007B7D3000 0000F4 (v04 INTEL S2600WT
00000000 INTL 20091013)
[ 0.000000] ACPI: DSDT 0x000000007B799000 0313B2 (v02 INTEL S2600WT
00000003 INTL 20091013)
[ 0.000000] ACPI: FACS 0x000000007B6FB000 000040
[ 0.000000] ACPI: HPET 0x000000007B7D2000 000038 (v01 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: APIC 0x000000007B7D1000 00085C (v03 INTEL S2600WT
00000000 INTL 20091013)
[ 0.000000] ACPI: MCFG 0x000000007B7D0000 00003C (v01 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: MSCT 0x000000007B7CF000 000090 (v01 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: SLIT 0x000000007B7CE000 00006C (v01 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: SRAT 0x000000007B7CD000 000730 (v03 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: SPMI 0x000000007B7CC000 000041 (v05 INTEL S2600WT
00000001 INTL 20091013)
[ 0.000000] ACPI: WDDT 0x000000007B7CB000 000040 (v01 INTEL S2600WT
00000000 INTL 20091013)
[ 0.000000] ACPI: PRAD 0x000000007B794000 000102 (v02 INTEL
SpsPrAgg 00000002 INTL 20130328)
[ 0.000000] ACPI: SSDT 0x0000000076279000 0ACA42 (v02 INTEL S2600WT
00004000 INTL 20130328)
[ 0.000000] ACPI: SSDT 0x000000007B796000 00216B (v02 INTEL S2600WT
00000002 INTL 20130328)
[ 0.000000] ACPI: SSDT 0x000000007B795000 000064 (v02 INTEL S2600WT
00000002 INTL 20130328)
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x06 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x08 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0a -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0c -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0e -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x10 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x14 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x16 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x18 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1a -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1c -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1e -> Node 1
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x07 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x09 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0b -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0d -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x0f -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 0x11 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x15 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x17 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x19 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1b -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1d -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 0x1f -> Node 1
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
[ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x307fffffff]
[ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x3080000000-0x607fffffff]
[ 0.000000] NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem
0x100000000-0x307fffffff] -> [mem 0x00000000-0x307fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x307fffe000-0x307fffffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x607fffb000-0x607fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000607fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000076278fff]
[ 0.000000] node 0: [mem 0x0000000076326000-0x000000007a1d2fff]
[ 0.000000] node 0: [mem 0x000000007b7d6000-0x000000007b7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000307fffffff]
[ 0.000000] node 1: [mem 0x0000003080000000-0x000000607fffffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000307fffffff]
[ 0.000000] Initmem setup node 1 [mem
0x0000003080000000-0x000000607fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x18] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x19] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x1f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x20] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x21] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x22] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x23] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x24] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x25] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x26] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x27] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x28] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x29] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x2f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x30] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x31] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x32] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x33] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x34] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x35] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x36] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x37] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x38] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x39] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x3f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x40] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x41] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x42] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x43] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x44] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x45] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x46] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x47] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x48] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x49] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x4f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x50] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x51] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x52] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x53] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x54] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x55] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x56] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x57] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x58] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x59] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x5f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x60] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x61] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x62] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x63] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x64] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x65] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x66] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x67] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x68] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x69] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x6f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x70] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x71] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x72] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x73] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x74] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x75] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x76] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x77] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x78] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x79] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x7f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x80] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x81] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x82] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x83] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x84] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x85] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x86] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x87] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x88] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x89] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x8a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x8b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x8c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x8d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x8f] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000,
GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000,
GSI 24-47
[ 0.000000] IOAPIC[2]: apic_id 10, version 32, address 0xfec40000,
GSI 48-71
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI
devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64
nr_cpu_ids:32 nr_node_ids:2
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff882fbfa00000 s95512
r8192 d31464 u262144
[ 0.000000] Built 2 zonelists in Node order, mobility grouping on.
Total pages: 99066449
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=kernelup panic=1
intel_idle.max_cstate=0 processor.max_cstate=1
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 126976 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 262144 bytes
[ 0.000000] early log buf free: 12212(37%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 396167976K/402555824K available (9238K kernel
code, 746K rwdata, 4564K rodata, 8016K init, 416K bss, 6387848K
reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32,
Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64,
nr_cpu_ids=32
[ 0.000000] NR_IRQS:4352 nr_irqs:1496 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2593.955 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5187.91 BogoMIPS (lpj=2593955)
[ 0.000533] pid_max: default: 32768 minimum: 301
[ 0.000793] ACPI: Core revision 20160831
[ 0.053980] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.054358] Security Framework initialized
[ 0.075657] Dentry cache hash table entries: 67108864 (order: 17,
536870912 bytes)
[ 0.187679] Inode-cache hash table entries: 33554432 (order: 16,
268435456 bytes)
[ 0.237637] Mount-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.238442] Mountpoint-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.242158] CPU: Physical Processor ID: 0
[ 0.242419] CPU: Processor Core ID: 0
[ 0.242667] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.242926] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.243194] mce: CPU supports 22 MCE banks
[ 0.243472] CPU0: Thermal monitoring enabled (TM1)
[ 0.243766] process: using mwait in idle threads
[ 0.244026] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.244278] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024,
1GB 4
[ 0.244712] Freeing SMP alternatives memory: 32K (ffffffff82890000 -
ffffffff82898000)
[ 0.304924] smpboot: APIC(0) Converting physical 0 to logical
package 0
[ 0.305190] smpboot: APIC(10) Converting physical 1 to logical
package 1
[ 0.305457] smpboot: Max logical packages: 4
[ 2.550280] pci 0000:00:03.2: PCI bridge to [bus 06]
[ 2.553870] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 2.554501] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11
12 14 15)
[ 2.555822] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11
12 14 15)
[ 2.580041] pps_core: LinuxPPS API ver. 1 registered
[ 2.580295] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
Rodolfo Giometti <giometti@xxxxxxxx>
[ 2.580745] PTP clock support registered
[ 2.581110] PCI: Using ACPI for IRQ routing
[ 2.586173] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.603833] pci 0000:00:03.0: PCI bridge to [bus 05]
[ 2.887526] ahci 0000:00:11.4: flags: 64bit ncq led clo pio slum
part ems apst
[ 2.898529] ata2: SATA max UDMA/133 abar m2048@0x91d00000 port
0x91d00180 irq 33
[ 2.900084] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
Gbps 0x3f impl SATA mode
[ 2.916697] scsi host6: ahci
[ 2.917722] scsi host9: ahci
[ 2.918887] ata7: SATA max UDMA/133 abar m2048@0x91d04000 port
0x91d04200 irq 34
[ 2.921132] pcnet32: pcnet32.c:v1.35 21.Apr.2008
tsbogend@xxxxxxxxxxxxxxxx
[ 2.922430] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver
bnx2x 1.712.30-0 (2014/02/10)
[ 2.923984] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 2.943303] hub 1-0:1.0: USB hub found
[ 2.943579] hub 1-0:1.0: 2 ports detected
[ 2.944056] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.944326] ehci-pci 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 2.944793] ehci-pci 0000:00:1d.0: debug port 2
[ 2.948964] ehci-pci 0000:00:1d.0: irq 18, io mem 0x91d01000
[ 2.955397] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.955678] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002
[ 2.955952] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.956419] usb usb2: Product: EHCI Host Controller
[ 12.435202] ixgbe 0000:81:00.1 eth3: WARNING: Intel (R) Network
Connections are quality tested using Intel (R) Ethernet Optics. Using
untested modules is not supported and may cause unstable operation or
damage to the module or the adapter. Intel Corporation is not
responsible for any harm caused by using untested modules.
[ 12.482848] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 12.506509] ixgbe 0000:81:00.1 eth3: detected SFP+: 6
[ 12.621982] ixgbe 0000:81:00.0: registered PHC device on eth2
[ 12.728533] bond0: Setting xmit hash policy to layer3+4 (1)
[ 12.731168] ixgbe 0000:81:00.0 eth2: WARNING: Intel (R) Network
Connections are quality tested using Intel (R) Ethernet Optics. Using
untested modules is not supported and may cause unstable operation or
damage to the module or the adapter. Intel Corporation is not
responsible for any harm caused by using untested modules.
[ 13.431163] bond0: Warning: No 802.3ad response from the link
partner for any adapters in the bond
[ 13.639115] ixgbe 0000:81:00.1 eth3: NIC Link is Up 10 Gbps, Flow
Control: RX/TX
[ 14.320655] netpoll: netconsole: local port 4444
[ 14.321441] netpoll: netconsole: remote port 514
[ 14.323951] console [netcon0] enabled
[ 14.324209] netconsole: network logging started
[ 14.425393] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.520950] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 14.641144] Netfilter messages via NETLINK v0.30.
[ 14.667368] ip_set: protocol 6