[PATCH v4 0/6] Add support for IR transmitters
From: Andi Shyti
Date: Wed Dec 14 2016 - 09:00:58 EST
Hi,
The main goal is to add support in the rc framework for IR
transmitters, which currently is only supported by lirc but that
is not the preferred way.
The last patch adds support for an IR transmitter driven by
the MOSI line of an SPI controller, it's the case of the Samsung
TM2(e) board which support is currently ongoing.
The last patch adds support for an IR transmitter driven by
the MOSI line of an SPI controller, it's the case of the Samsung
TM2(e) board which support is currently ongoing.
Thanks,
Andi
Changelog from version 1:
-------------------------
The RFC is now PATCH. The main difference is that this version
doesn't try to add the any bit streaming protocol and doesn't
modify any LIRC interface specification.
patch 1: updates all the drivers using rc_allocate_device
patch 2: fixed errors and warning reported from the kbuild test
robot
patch 5: this patch has been dropped and replaced with a new one
which avoids waiting for transmitters.
patch 6: added new properties to the dts specification
patch 7: the driver uses the pulse/space input and converts it to
a bit stream.
Changelog from version 2:
-------------------------
The original patch number 5 has been abandoned because it was not
bringing much benenfit.
patch 1: rebased on the new kernel.
patch 3: removed the sysfs attribute protocol for transmitters
patch 5: the binding has been moved to the leds section instead
of the media. Fixed all the comments from Rob
patch 6: fixed all the comments from Sean added also Sean's
review.
Changelog from version 3:
-------------------------
Added the patches Sean's review.
patch 1: commit ddbf7d5a has introduced the devm_* managed version
of rc_allocate_device and rc_register_device, this patch
has been rebased on top of it and adds the driver type
as a parameter of the devm_rc_allocate_device.
patch 3: fixes a warning from the kbuild test robot
patch 5: after a discussion with Rob, despite mine, Jacek's and
Mauro's objections [*] the binding has been placed under
leds/irled/spi-ir-led.txt
patch 6: uses the new devm_* allocation and registration rc
functions
[*] https://www.spinics.net/lists/linux-leds/msg07062.html
https://www.spinics.net/lists/linux-leds/msg07164.html
https://www.spinics.net/lists/linux-leds/msg07167.html
Andi Shyti (6):
[media] rc-main: assign driver type during allocation
[media] rc-main: split setup and unregister functions
[media] rc-core: add support for IR raw transmitters
[media] rc-ir-raw: do not generate any receiving thread for raw
transmitters
Documentation: bindings: add documentation for ir-spi device driver
[media] rc: add support for IR LEDs driven through SPI
.../devicetree/bindings/leds/irled/spi-ir-led.txt | 29 +++
drivers/hid/hid-picolcd_cir.c | 3 +-
drivers/media/cec/cec-core.c | 3 +-
drivers/media/common/siano/smsir.c | 3 +-
drivers/media/i2c/ir-kbd-i2c.c | 2 +-
drivers/media/pci/bt8xx/bttv-input.c | 2 +-
drivers/media/pci/cx23885/cx23885-input.c | 11 +-
drivers/media/pci/cx88/cx88-input.c | 3 +-
drivers/media/pci/dm1105/dm1105.c | 3 +-
drivers/media/pci/mantis/mantis_input.c | 2 +-
drivers/media/pci/saa7134/saa7134-input.c | 2 +-
drivers/media/pci/smipcie/smipcie-ir.c | 3 +-
drivers/media/pci/ttpci/budget-ci.c | 2 +-
drivers/media/rc/Kconfig | 9 +
drivers/media/rc/Makefile | 1 +
drivers/media/rc/ati_remote.c | 3 +-
drivers/media/rc/ene_ir.c | 3 +-
drivers/media/rc/fintek-cir.c | 3 +-
drivers/media/rc/gpio-ir-recv.c | 3 +-
drivers/media/rc/igorplugusb.c | 3 +-
drivers/media/rc/iguanair.c | 3 +-
drivers/media/rc/img-ir/img-ir-hw.c | 2 +-
drivers/media/rc/img-ir/img-ir-raw.c | 3 +-
drivers/media/rc/imon.c | 3 +-
drivers/media/rc/ir-hix5hd2.c | 3 +-
drivers/media/rc/ir-spi.c | 199 +++++++++++++++++++++
drivers/media/rc/ite-cir.c | 3 +-
drivers/media/rc/mceusb.c | 3 +-
drivers/media/rc/meson-ir.c | 3 +-
drivers/media/rc/nuvoton-cir.c | 3 +-
drivers/media/rc/rc-ir-raw.c | 17 +-
drivers/media/rc/rc-loopback.c | 3 +-
drivers/media/rc/rc-main.c | 186 +++++++++++--------
drivers/media/rc/redrat3.c | 3 +-
drivers/media/rc/serial_ir.c | 3 +-
drivers/media/rc/st_rc.c | 3 +-
drivers/media/rc/streamzap.c | 3 +-
drivers/media/rc/sunxi-cir.c | 3 +-
drivers/media/rc/ttusbir.c | 3 +-
drivers/media/rc/winbond-cir.c | 3 +-
drivers/media/usb/au0828/au0828-input.c | 3 +-
drivers/media/usb/cx231xx/cx231xx-input.c | 2 +-
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 3 +-
drivers/media/usb/dvb-usb/dvb-usb-remote.c | 3 +-
drivers/media/usb/em28xx/em28xx-input.c | 2 +-
drivers/media/usb/tm6000/tm6000-input.c | 3 +-
include/media/rc-core.h | 15 +-
47 files changed, 408 insertions(+), 168 deletions(-)
create mode 100644 Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
create mode 100644 drivers/media/rc/ir-spi.c
--
2.10.2