Re: [PATCH v3 2/2] dt-bindings: power: add bindings for sbs-charger

[Sebastian Reichel]

Hi,

On Thu, Nov 24, 2016 at 01:33:43PM +0100, Nicolas Saenz Julienne wrote:
> Adds device tree documentation for SBS charger compilant devices as defined
> here: http://sbs-forum.org/specs/sbc110.pdf
> 
> Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@xxxxxxxxxx>
> ---
> v2 -> v3:
> - add part number as compatible
> 
>  .../bindings/power/supply/sbs_sbs-charger.txt      | 24 ++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> new file mode 100644
> index 0000000..f6b6027
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> @@ -0,0 +1,24 @@
> +SBS sbs-charger
> +~~~~~~~~~~
> +
> +Required properties:
> + - compatible: should contain one of the following:
> +	- "lltc,ltc4100"
> +	- "sbs,sbs-charger"

That's not what I meant. The idea is to specify "lltc,ltc4100" with
"sbs,sbs-charger" as fallback. Then the driver for now only handles
"sbs,sbs-charger", but if any vendor registers need to be supported
we have a more specific compatible value in DT, that can be used to
identify the device.

> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller. Use in
> +    conjunction with "interrupts".
> +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
> +    "interrupt-parent". If an interrupt is not provided the driver will switch
> +    automatically to polling.
> +
> +Example:
> +
> +	ltc4100@9 {
> +		compatible = "sbs,sbs-charger";
> +		reg = <0x9>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +	};

So the example would look like

compatible = "lltc,ltc4100", "sbs,sbs-charger";

-- Sebastian

Attachment: signature.asc
Description: PGP signature