Re: [PATCH v2 03/10] dt-bindings: perf: hisi: Add Devicetree bindings for Hisilicon SoC PMU

[Rob Herring]

On Wed, Dec 07, 2016 at 11:55:59AM -0500, Anurup M wrote:
> 1) Device tree bindings for Hisilicon SoC PMU.
> 2) Add example for Hisilicon L3 cache and MN PMU.
> 3) Add child nodes of L3C and MN in djtag bindings example.
> 
> Signed-off-by: Anurup M <anurup.m@xxxxxxxxxx>
> Signed-off-by: Shaokun Zhang <zhangshaokun@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/arm/hisilicon/djtag.txt    | 25 ++++++
>  .../devicetree/bindings/arm/hisilicon/pmu.txt      | 98 ++++++++++++++++++++++
>  2 files changed, 123 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> index 733498e..c885507 100644
> --- a/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/djtag.txt
> @@ -27,6 +27,31 @@ Example 1: Djtag for CPU die
>  		scl-id = <0x02>;
>  
>  		/* All connecting components will appear as child nodes */
> +
> +		pmul3c0 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x02>;
> +		};
> +
> +		pmul3c1 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x04>;
> +		};
> +
> +		pmul3c2 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x01>;
> +		};
> +
> +		pmul3c3 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x08>;
> +		};
> +
> +		pmumn0 {
> +			compatible = "hisilicon,hisi-pmu-mn-v1";
> +			module-id = <0x0b>;
> +		};
>  	};
>  
>  Example 2: Djtag for IO die
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> new file mode 100644
> index 0000000..e2160ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/pmu.txt
> @@ -0,0 +1,98 @@
> +Hisilicon SoC HiP05/06/07 ARMv8 PMU
> +===================================
> +
> +The Hisilicon SoC chips like HiP05/06/07 etc. consist of various independent
> +system device PMUs such as L3 cache (L3C) and Miscellaneous Nodes(MN). These
> +PMU devices are independent and have hardware logic to gather statistics and
> +performance information.
> +
> +HiSilicon SoC chip is encapsulated by multiple CPU and IO dies. The CPU die
> +is called as Super CPU cluster (SCCL) which includes 16 cpu-cores. Every SCCL
> +in HiP05/06/07 chips are further grouped as CPU clusters (CCL) which includes
> +4 cpu-cores each.
> +e.g. In the case of HiP05/06/07, each SCCL has 1 L3 cache and 1 MN PMU device.
> +The L3 cache is further grouped as 4 L3 cache banks in a SCCL.
> +
> +The Hisilicon SoC PMU DT node bindings for uncore PMU devices are as below.
> +For PMU devices like L3 cache. MN etc. which are accessed using the djtag,
> +the parent node will be the djtag node of the corresponding CPU die (SCCL).
> +
> +L3 cache
> +---------
> +The L3 cache is dedicated for each SCCL. Each SCCL in HiP05/06/07 chips have 4
> +L3 cache banks. Each L3 cache bank have separate DT nodes.
> +
> +Required properties:
> +
> +	- compatible : This value should be as follows
> +		(a) "hisilicon,hisi-pmu-l3c-v1" for v1 hw in HiP05/06 chips
> +		(b) "hisilicon,hisi-pmu-l3c-v2" for v2 hw in HiP07 chip

Use SoC specific compatible strings.

> +
> +	- module-id : This property is a combination of two values in the below order.
> +		      a) Module ID: The module identifier for djtag.
> +		      b) Instance or Bank ID: This will identify the L3 cache bank
> +			 or instance.

Needs a vendor prefix.

> +
> +Optional properties:
> +
> +	- interrupt-parent : A phandle indicating which interrupt controller
> +		this PMU signals interrupts to.
> +
> +	- interrupts : Interrupt lines used by this L3 cache bank.

How many interrupts and what are they?

> +
> +	*The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
> +
> +Miscellaneous Node
> +------------------
> +The MN is dedicated for each SCCL and hence there are separate DT nodes for MN
> +for each SCCL.

Similar comments here.

> +
> +Required properties:
> +
> +	- compatible : This value should be as follows
> +		(a) "hisilicon,hisi-pmu-mn-v1" for v1 hw in HiP05/06 chips
> +		(b) "hisilicon,hisi-pmu-mn-v2" for v2 hw in HiP07 chip
> +
> +	- module-id : Module ID to input for djtag.
> +
> +Optional properties:
> +
> +	- interrupt-parent : A phandle indicating which interrupt controller
> +		this PMU signals interrupts to.
> +
> +	- interrupts : Interrupt lines used by this PMU.
> +
> +	*The counter overflow IRQ is not supported in v1 hardware (HiP05/06).
> +
> +Example:
> +
> +	djtag0: djtag@80010000 {
> +		compatible = "hisilicon,hisi-djtag-v1";
> +		reg = <0x0 0x80010000 0x0 0x10000>;
> +		scl-id = <0x02>;
> +
> +		pmul3c0 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x02>;
> +		};
> +
> +		pmul3c1 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x04>;
> +		};
> +
> +		pmul3c2 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x01>;
> +		};
> +
> +		pmul3c3 {
> +			compatible = "hisilicon,hisi-pmu-l3c-v1";
> +			module-id = <0x04 0x08>;
> +		};
> +
> +		pmumn0 {
> +			compatible = "hisilicon,hisi-pmu-mn-v1";
> +			module-id = <0x0b>;
> +		};
> +	};
> -- 
> 2.1.4
>