Re: [PATCH 2/3] NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage

[Geoff Lansberry]

On Mon, Dec 19, 2016 at 5:35 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Thu, Dec 15, 2016 at 05:30:43PM -0500, Geoff Lansberry wrote:
>> From: Geoff Lansberry <geoff@xxxxxxxxx>
>>
>> ---
>>  Documentation/devicetree/bindings/net/nfc/trf7970a.txt |  2 ++
>>  drivers/nfc/trf7970a.c                                 | 13 ++++++++++++-
>>  2 files changed, 14 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> index 9dda879..208f045 100644
>> --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
>> @@ -21,6 +21,7 @@ Optional SoC Specific Properties:
>>  - t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum
>>    where an extra byte is returned by Read Multiple Block commands issued
>>    to Type 5 tags.
>> +- vdd_io_1v8: Set to specify that the trf7970a io voltage should be set to 1.8V
>
> Use the regulator binding and provide a fixed 1.8V supply.
>
>>  - crystal_27mhz: Set to specify that the input frequency to the trf7970a is 27.12MHz
>>
>>
>> @@ -45,6 +46,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
>>               irq-status-read-quirk;
>>               en2-rf-quirk;
>>               t5t-rmb-extra-byte-quirk;
>> +             vdd_io_1v8;
>>               crystal_27mhz;
>>               status = "okay";
>>       };

Rob - using the regulator binding is new to me, but I've given it a
shot and just sent you another set of patches for your inspection.
Please let me know if this is what you had in mind.

Geoff