[PATCHv14 2/3] usb: USB Type-C connector class
From: Heikki Krogerus
Date: Thu Jan 05 2017 - 06:08:06 EST
The purpose of USB Type-C connector class is to provide
unified interface for the user space to get the status and
basic information about USB Type-C connectors on a system,
control over data role swapping, and when the port supports
USB Power Delivery, also control over power role swapping
and Alternate Modes.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
Documentation/ABI/testing/sysfs-class-typec | 219 +++++
Documentation/usb/typec.txt | 181 ++++
MAINTAINERS | 9 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 2 +
drivers/usb/typec/Kconfig | 7 +
drivers/usb/typec/Makefile | 1 +
drivers/usb/typec/typec.c | 1190 +++++++++++++++++++++++++++
include/linux/usb/typec.h | 212 +++++
9 files changed, 1823 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-typec
create mode 100644 Documentation/usb/typec.txt
create mode 100644 drivers/usb/typec/Kconfig
create mode 100644 drivers/usb/typec/Makefile
create mode 100644 drivers/usb/typec/typec.c
create mode 100644 include/linux/usb/typec.h
diff --git a/Documentation/ABI/testing/sysfs-class-typec b/Documentation/ABI/testing/sysfs-class-typec
new file mode 100644
index 000000000000..1b8447968fcf
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-typec
@@ -0,0 +1,219 @@
+USB Type-C port devices (eg. /sys/class/typec/port0/)
+
+What: /sys/class/typec/<port>/current_data_role
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ The current USB data role the port is operating in. This
+ attribute can be used for requesting data role swapping on the
+ port. Swapping is supported as synchronous operation, so
+ write(2) to the attribute will not return until the operation
+ has finished. The attribute is notified about role changes so
+ that poll(2) on the attribute wakes up. Change on the role will
+ also generate uevent KOBJ_CHANGE on the port.
+
+ Valid values:
+ - host
+ - device
+
+What: /sys/class/typec/<port>/current_power_role
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ The current power role of the port. This attribute can be used
+ to request power role swap on the port when the port supports
+ USB Power Delivery. Swapping is supported as synchronous
+ operation, so write(2) to the attribute will not return until
+ the operation has finished. The attribute is notified about role
+ changes so that poll(2) on the attribute wakes up. Change on the
+ role will also generate uevent KOBJ_CHANGE.
+
+ Valid values:
+ - source
+ - sink
+
+What: /sys/class/typec/<port>/vconn_source
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows is the port VCONN Source. This attribute can be used to
+ request VCONN swap to change the VCONN Source during connection
+ when both the port and the partner support USB Power Delivery.
+ Swapping is supported as synchronous operation, so write(2) to
+ the attribute will not return until the operation has finished.
+ The attribute is notified about VCONN source changes so that
+ poll(2) on the attribute wakes up. Change on VCONN source also
+ generates uevent KOBJ_CHANGE.
+
+ Valid values are:
+ - 0 when the port is not the VCONN Source
+ - 1 when the port is the VCONN Source
+
+What: /sys/class/typec/<port>/power_operation_mode
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows the current power operational mode the port is in.
+
+ Valid values:
+ - USB - Normal power levels defined in USB specifications
+ - USB Type-C 1.5A - Higher 1.5A current defined in USB Type-C
+ specification.
+ - USB Type-C 3.0A - Higher 3A current defined in USB Type-C
+ specification.
+ - USB Power Delivery - The voltages and currents defined in USB
+ Power Delivery specification
+
+What: /sys/class/typec/<port>/preferred_role
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ The user space can notify the driver about the preferred role.
+ It should be handled as enabling of Try.SRC or Try.SNK, as
+ defined in USB Type-C specification, in the port drivers. By
+ default there is no preferred role.
+
+ Valid values:
+ - source
+ - sink
+ - none - to remove preference
+
+What: /sys/class/typec/<port>/supported_accessory_modes
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Lists the Accessory Modes, defined in the USB Type-C
+ specification, the port supports.
+
+What: /sys/class/typec/<port>/supported_data_roles
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Lists the USB data roles the port is capable of supporting.
+
+ Valid values:
+ - device
+ - host
+ - device, host (DRD as defined in USB Type-C specification v1.2)
+
+What: /sys/class/typec/<port>/supported_power_roles
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Lists the power roles the port is capable of supporting.
+
+ Valid values:
+ - source
+ - sink
+ - source, sink (DRP as defined in USB Type-C specification v1.2)
+
+What: /sys/class/typec/<port>/supports_usb_power_delivery
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows if the port supports USB Power Delivery.
+ - 1 if USB Power Delivery is supported
+ - 0 when it's not
+
+
+USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
+
+What: /sys/class/typec/<port>-partner/accessory_mode
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows the Accessory Mode name when the partner an Accesory Mode.
+ The Accessory Modes are defined in USB Type-C Specification.
+
+What: /sys/class/typec/<port>-partner/supports_usb_power_delivery
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows if the partner supports USB Power Delivery:
+ - 0 when USB Power Delivery is not supported
+ - 1 when USB Power Delivery is supported
+
+
+USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
+
+Note: Electronically Marked Cables will have a device also for one cable plug
+(eg. /sys/class/typec/port0-plug0). If the cable is active and has also SOP
+Double Prime controller (USB Power Deliver specification ch. 2.4) it will have
+second device also for the other plug. Both plugs may have their alternate modes
+as described in USB Type-C and USB Power Delivery specifications.
+
+What: /sys/class/typec/<port>-cable/active
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows if the cable is active or passive.
+
+ Valid values:
+ - 0 when the cable is passive
+ - 1 when the cable is active
+
+What: /sys/class/typec/<port>-cable/plug_type
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows type of the plug on the cable:
+ - Type-A - Standard A
+ - Type-B - Standard B
+ - Type-C - USB Type-C
+ - Captive - Non-standard
+
+What: /sys/class/typec/<port>-cable/supports_usb_power_delivery
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows if the cable supports USB Power Delivery:
+ - 0 when USB Power Delivery is not supported
+ - 1 when USB Power Delivery is supported
+
+
+Alternate Mode devices (For example,
+/sys/class/typec/port0-partner/port0-partner.svid:xxxx/). The ports, partners
+and cable plugs can have alternate modes.
+
+What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/active
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows if the mode is active or not. The attribute can be used
+ for entering/exiting the mode with partners and cable plugs, and
+ with the port alternate modes it can be used for disabling
+ support for specific alternate modes. Entering/exiting modes is
+ supported as synchronous operation so write(2) to the attribute
+ does not return until the enter/exit mode operation has
+ finished. The attribute is notified when the mode is
+ entered/exited so poll(2) on the attribute wakes up.
+ Entering/exiting a mode will also generate uevent KOBJ_CHANGE.
+
+ Valid values:
+ - 0 when the mode is inactive
+ - 1 when the mode is active
+
+What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/description
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows description of the mode. The description is optional for
+ the drivers, just like with the Billboard Devices.
+
+What: /sys/class/typec/<dev>/<dev>.svid:<svid>/<mode>/vdo
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows the VDO in hexadecimal returned from the Discover Modes
+ command.
+
+What: /sys/class/typec/<port>/<port>.svid:<svid>/<mode>/supported_roles
+Date: February 2017
+Contact: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+Description:
+ Shows the roles, source or sink, the mode is supported with.
+
+ This attribute is available for the devices describing the
+ alternate modes a port supports, and it will not be exposed with
+ the devices presenting the alternate modes the partners or cable
+ plugs support.
diff --git a/Documentation/usb/typec.txt b/Documentation/usb/typec.txt
new file mode 100644
index 000000000000..9cafc31def32
--- /dev/null
+++ b/Documentation/usb/typec.txt
@@ -0,0 +1,181 @@
+USB Type-C connector class
+==========================
+
+Introduction
+------------
+The typec class is meant for describing the USB Type-C ports in a system to the
+user space in unified fashion. The class is designed to provide nothing else
+except the user space interface implementation in hope that it can be utilized
+on as many platforms as possible.
+
+The platforms are expected to register every USB Type-C port they have with the
+class. In a normal case the registration will be done by a USB Type-C or PD PHY
+driver, but it may be a driver for firmware interface such as UCSI, driver for
+USB PD controller or even driver for Thunderbolt3 controller. This document
+considers the component registering the USB Type-C ports with the class as "port
+driver".
+
+On top of showing the capabilities, the class also offer user space control over
+the roles and alternate modes of ports, partners and cable plugs when the port
+driver is capable of supporting those features.
+
+The class provides an API for the port drivers described in this document. The
+attributes are described in Documentation/ABI/testing/sysfs-class-typec.
+
+
+Interface
+---------
+Every port will be presented as its own device under /sys/class/typec/. The
+first port will be named "port0", the second "port1" and so on.
+
+When connected, the partner will be presented also as its own device under
+/sys/class/typec/. The parent of the partner device will always be the port. The
+partner attached to port "port0" will be named "port0-partner". Full path to the
+device would be /sys/class/typec/port0/port0-partner/.
+
+The cable and the two plugs on it may also be optionally presented as their own
+devices under /sys/class/typec/. The cable attached to the port "port0" port
+will be named port0-cable and the plug on the SOP Prime end (see USB Power
+Delivery Specification ch. 2.4) will be named "port0-plug0" and on the SOP
+Double Prime end "port0-plug1". The parent of a cable will always be the port,
+and the parent of the cable plugs will always be the cable.
+
+If the port, partner or cable plug support Alternate Modes, every Alternate Mode
+SVID will have their own device describing them. The Alternate Modes will not be
+attached to the typec class. For the port's "port0" partner, the Alternate Modes
+would have devices presented under /sys/class/typec/port0-partner/. Every mode
+that is supported will have its own group under the Alternate Mode device named
+"mode<index>". For example /sys/class/typec/port0/port0.svid:xxxx/mode0/. The
+requests for entering/exiting a mode happens with "active" attribute file in
+that group.
+
+
+API
+---
+
+The functions and structures of the class are defined in
+linux/include/usb/typec.h header.
+
+
+* Registering the ports
+
+The port drivers will describe every Type-C port they control with struct
+typec_capability data structure, and register them with the following API:
+
+struct typec_port *typec_register_port(struct device *parent,
+ const struct typec_capability *cap);
+
+The class will provide handle to struct typec_port on success and NULL on
+failure. The un-registration of the port happens with the following API:
+
+void typec_unregister_port(struct typec_port *port);
+
+When registering the ports, the prefer_role member in struct typec_capability
+deservers special notice. If the port that is being registered does not have
+initial role preference, which means the port does not execute Try.SNK or
+Try.SRC by default, the member must have value TYPEC_NO_PREFERRED_ROLE.
+Otherwise if the port executes Try.SNK by default the member must have value
+TYPEC_DEVICE and with Try.SRC the value must be TYPEC_HOST.
+
+
+* Registering Partners
+
+After successful connection of a partner, the port driver needs to register the
+partner with the class. Details about the partner need to be described in struct
+typec_partner_desc. The class copies the details of the partner during
+registration. The class offers the following API for registering/unregistering
+partners.
+
+struct typec_partner *typec_register_partner(struct typec_port *port,
+ struct typec_partner_desc *desc);
+void typec_unregister_partner(struct typec_partner *partner);
+
+The class will provide a handle to struct typec_partner if the registration was
+successful, or NULL.
+
+
+* Registering Cables
+
+After successful connection of a cable that supports USB Power Delivery
+Structured VDM "Discover Identity", the port driver needs to register the cable
+and one or two plugs, depending if there is CC Double Prime controller present
+in the cable or not. So a cable capable of SOP Prime communication, but not SOP
+Double Prime communication, should only have one plug registered. For more
+information about SOP communication, please read chapter about it from the
+latest USB Power Delivery specification.
+
+The plugs are represented as their own devices. The cable is registered first,
+followed by registration of the cable plugs. The cable will be the parent device
+for the plugs. Details about the cable need to be described in struct
+typec_cable_desc and about a plug in struct typec_plug_desc. The class copies
+the details during registration. The class offers the following API for
+registering/unregistering cables and their plugs:
+
+struct typec_cable *typec_register_cable(struct typec_port *port,
+ struct typec_cable_desc *desc);
+void typec_unregister_cable(struct typec_cable *cable);
+
+struct typec_plug *typec_register_plug(struct typec_cable *cable,
+ struct typec_plug_desc *desc);
+void typec_unregister_plug(struct typec_plug *plug);
+
+The class will provide a handle to struct typec_cable and struct typec_plug if
+the registration is successful, or NULL if it isn't.
+
+
+* Notifications
+
+When the partner end has executed a role change, or when the default roles change
+during connection of a partner or cable, the port driver must use the following
+APIs to report it to the class:
+
+void typec_set_data_role(struct typec_port *, enum typec_data_role);
+void typec_set_pwr_role(struct typec_port *, enum typec_role);
+void typec_set_vconn_role(struct typec_port *, enum typec_role);
+void typec_set_pwr_opmode(struct typec_port *, enum typec_pwr_opmode);
+
+
+* Alternate Modes
+
+USB Type-C Ports, Partners and Cable Plugs may support Alternate Modes with USB
+Type-C. Each Alternate Mode will have SVID, which is either a Standard ID given
+by USB-IF or vendor ID. Each SVID will support 1 - 7 modes. The class provides
+struct typec_mode_desc for describing individual mode of a SVID, and struct
+typec_altmode_desc which is a container of all the modes of a SVID that a
+port, partner or cable plug supports.
+
+Ports that support Alternate Modes need to register each SVID they support with
+the following API:
+
+struct typec_altmode
+*typec_port_register_altmode(struct typec_port *port,
+ struct typec_altmode_desc *desc);
+
+If a partner or cable plug provides a list of SVIDs as response to USB Power
+Delivery Structured VDM Discover SVIDs message, each SVID needs to be registered
+with the following API.
+
+API for the partners:
+
+struct typec_altmode
+*typec_partner_register_altmode(struct typec_partner *partner,
+ struct typec_altmode_desc *desc);
+
+API for the Cable Plugs:
+
+struct typec_altmode
+*typec_plug_register_altmode(struct typec_plug *plug,
+ struct typec_altmode_desc *desc);
+
+So ports, partners and cable plugs will register the alternate modes with their
+own functions, but the registration will always return a handle to struct
+typec_altmode on success, or NULL. The unregistration will happen with the same
+function:
+
+void typec_unregister_altmode(struct typec_altmode *altmode);
+
+If a partner or cable plug enters or exits a mode, the port driver needs to
+notify the class with the following API:
+
+void typec_altmode_update_active(struct typec_altmode *alt, int mode,
+ bool active);
diff --git a/MAINTAINERS b/MAINTAINERS
index 97b78cc5aa51..ecfbcad4fd11 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12895,6 +12895,15 @@ F: drivers/usb/
F: include/linux/usb.h
F: include/linux/usb/
+USB TYPEC SUBSYSTEM
+M: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+L: linux-usb@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/ABI/testing/sysfs-class-typec
+F: Documentation/usb/typec.txt
+F: drivers/usb/typec/
+F: include/linux/usb/typec.h
+
USB UHCI DRIVER
M: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
L: linux-usb@xxxxxxxxxxxxxxx
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index fbe493d44e81..89c322e0742b 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -152,6 +152,8 @@ source "drivers/usb/phy/Kconfig"
source "drivers/usb/gadget/Kconfig"
+source "drivers/usb/typec/Kconfig"
+
config USB_LED_TRIG
bool "USB LED Triggers"
depends on LEDS_CLASS && LEDS_TRIGGERS
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 7791af6c102c..c7f409885eff 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -62,3 +62,5 @@ obj-$(CONFIG_USB_GADGET) += gadget/
obj-$(CONFIG_USB_COMMON) += common/
obj-$(CONFIG_USBIP_CORE) += usbip/
+
+obj-$(CONFIG_TYPEC) += typec/
diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
new file mode 100644
index 000000000000..17792f9114c6
--- /dev/null
+++ b/drivers/usb/typec/Kconfig
@@ -0,0 +1,7 @@
+
+menu "USB Power Delivery and Type-C drivers"
+
+config TYPEC
+ tristate
+
+endmenu
diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
new file mode 100644
index 000000000000..1012a8bed6d5
--- /dev/null
+++ b/drivers/usb/typec/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_TYPEC) += typec.o
diff --git a/drivers/usb/typec/typec.c b/drivers/usb/typec/typec.c
new file mode 100644
index 000000000000..fe6571ca4d81
--- /dev/null
+++ b/drivers/usb/typec/typec.c
@@ -0,0 +1,1190 @@
+/*
+ * USB Type-C Connector Class
+ *
+ * Copyright (C) 2017, Intel Corporation
+ * Author: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/usb/typec.h>
+
+/* XXX: Once we have a header for USB Power Delivery, this belongs there */
+#define ALTMODE_MAX_N_MODES 7
+
+struct typec_mode {
+ int index;
+ u32 vdo;
+ char *desc;
+ enum typec_port_type roles;
+
+ struct typec_altmode *alt_mode;
+
+ unsigned int active:1;
+
+ char group_name[6];
+ struct attribute_group group;
+ struct attribute *attrs[5];
+ struct device_attribute vdo_attr;
+ struct device_attribute desc_attr;
+ struct device_attribute active_attr;
+ struct device_attribute roles_attr;
+};
+
+struct typec_altmode {
+ struct device dev;
+ u16 svid;
+ int n_modes;
+ struct typec_mode modes[ALTMODE_MAX_N_MODES];
+ const struct attribute_group *mode_groups[ALTMODE_MAX_N_MODES];
+};
+
+struct typec_plug {
+ struct device dev;
+ enum typec_plug_index index;
+};
+
+struct typec_cable {
+ struct device dev;
+ u16 pd_revision;
+ enum typec_plug_type type;
+ u32 vdo;
+ unsigned int active:1;
+};
+
+struct typec_partner {
+ struct device dev;
+ u16 pd_revision;
+ u32 vdo;
+ enum typec_accessory accessory;
+};
+
+struct typec_port {
+ unsigned int id;
+ struct device dev;
+
+ int prefer_role;
+ enum typec_data_role data_role;
+ enum typec_role pwr_role;
+ enum typec_role vconn_role;
+ enum typec_pwr_opmode pwr_opmode;
+
+ const struct typec_capability *cap;
+};
+
+#define to_typec_port(_dev_) container_of(_dev_, struct typec_port, dev)
+#define to_typec_plug(_dev_) container_of(_dev_, struct typec_plug, dev)
+#define to_typec_cable(_dev_) container_of(_dev_, struct typec_cable, dev)
+#define to_typec_partner(_dev_) container_of(_dev_, struct typec_partner, dev)
+#define to_altmode(_dev_) container_of(_dev_, struct typec_altmode, dev)
+
+static const struct device_type typec_partner_dev_type;
+static const struct device_type typec_cable_dev_type;
+static const struct device_type typec_plug_dev_type;
+static const struct device_type typec_port_dev_type;
+
+#define is_typec_partner(_dev_) (_dev_->type == &typec_partner_dev_type)
+#define is_typec_cable(_dev_) (_dev_->type == &typec_cable_dev_type)
+#define is_typec_plug(_dev_) (_dev_->type == &typec_plug_dev_type)
+#define is_typec_port(_dev_) (_dev_->type == &typec_port_dev_type)
+
+static DEFINE_IDA(typec_index_ida);
+static struct class *typec_class;
+
+/* Common attributes */
+
+static const char * const typec_accessory_modes[] = {
+ [TYPEC_ACCESSORY_NONE] = "None",
+ [TYPEC_ACCESSORY_AUDIO] = "Audio Adapter Accessory Mode",
+ [TYPEC_ACCESSORY_DEBUG] = "Debug Accessory Mode",
+};
+
+static ssize_t usb_power_delivery_revision_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u16 rev = 0;
+
+ if (is_typec_partner(dev)) {
+ struct typec_partner *p = to_typec_partner(dev);
+
+ rev = p->pd_revision;
+ } else if (is_typec_cable(dev)) {
+ struct typec_cable *p = to_typec_cable(dev);
+
+ rev = p->pd_revision;
+ } else if (is_typec_port(dev)) {
+ struct typec_port *p = to_typec_port(dev);
+
+ rev = p->cap->pd_revision;
+ }
+
+ return sprintf(buf, "%d\n", (rev >> 8) & 0xff);
+}
+static DEVICE_ATTR_RO(usb_power_delivery_revision);
+
+static ssize_t
+vdo_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ u32 vdo = 0;
+
+ if (is_typec_partner(dev)) {
+ struct typec_partner *p = to_typec_partner(dev);
+
+ vdo = p->vdo;
+ } else if (is_typec_cable(dev)) {
+ struct typec_cable *p = to_typec_cable(dev);
+
+ vdo = p->vdo;
+ }
+
+ return sprintf(buf, "0x%08x\n", vdo);
+}
+static DEVICE_ATTR_RO(vdo);
+
+/* ------------------------------------------------------------------------- */
+/* Alternate Modes */
+
+/**
+ * typec_altmode_update_active - Report Enter/Exit mode
+ * @alt: Handle to the alternate mode
+ * @mode: Mode index
+ * @active: True when the mode has been entered
+ *
+ * If a partner or cable plug executes Enter/Exit Mode command successfully, the
+ * drivers use this routine to report the updated state of the mode.
+ */
+void typec_altmode_update_active(struct typec_altmode *alt, int mode,
+ bool active)
+{
+ struct typec_mode *m = &alt->modes[mode];
+ char dir[6];
+
+ if (m->active == active)
+ return;
+
+ m->active = active;
+ snprintf(dir, 6, "mode%d", mode);
+ sysfs_notify(&alt->dev.kobj, dir, "active");
+ kobject_uevent(&alt->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_altmode_update_active);
+
+/**
+ * typec_altmode2port - Alternate Mode to USB Type-C port
+ * @alt: The Alternate Mode
+ *
+ * Returns handle to the port that a cable plug or partner with @alt is
+ * connected to.
+ */
+struct typec_port *typec_altmode2port(struct typec_altmode *alt)
+{
+ if (is_typec_plug(alt->dev.parent))
+ return to_typec_port(alt->dev.parent->parent->parent);
+ if (is_typec_partner(alt->dev.parent))
+ return to_typec_port(alt->dev.parent->parent);
+ if (is_typec_port(alt->dev.parent))
+ return to_typec_port(alt->dev.parent);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(typec_altmode2port);
+
+static void typec_altmode_release(struct device *dev)
+{
+ struct typec_altmode *alt = to_altmode(dev);
+ int i;
+
+ for (i = 0; i < alt->n_modes; i++)
+ kfree(alt->modes[i].desc);
+ kfree(alt);
+}
+
+static ssize_t
+typec_altmode_vdo_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_mode *mode = container_of(attr, struct typec_mode,
+ vdo_attr);
+
+ return sprintf(buf, "0x%08x\n", mode->vdo);
+}
+
+static ssize_t
+typec_altmode_desc_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_mode *mode = container_of(attr, struct typec_mode,
+ desc_attr);
+
+ return sprintf(buf, "%s\n", mode->desc ? mode->desc : "");
+}
+
+static ssize_t
+typec_altmode_active_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_mode *mode = container_of(attr, struct typec_mode,
+ active_attr);
+
+ return sprintf(buf, "%d\n", mode->active);
+}
+
+static ssize_t
+typec_altmode_active_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_mode *mode = container_of(attr, struct typec_mode,
+ active_attr);
+ struct typec_port *port = typec_altmode2port(mode->alt_mode);
+ bool activate;
+ int ret;
+
+ if (!port->cap->activate_mode)
+ return -EOPNOTSUPP;
+
+ ret = kstrtobool(buf, &activate);
+ if (ret)
+ return ret;
+
+ ret = port->cap->activate_mode(port->cap, mode->index, activate);
+ if (ret)
+ return ret;
+
+ return size;
+}
+
+static ssize_t
+typec_altmode_roles_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_mode *mode = container_of(attr, struct typec_mode,
+ roles_attr);
+ ssize_t ret;
+
+ switch (mode->roles) {
+ case TYPEC_PORT_DFP:
+ ret = sprintf(buf, "source\n");
+ break;
+ case TYPEC_PORT_UFP:
+ ret = sprintf(buf, "sink\n");
+ break;
+ case TYPEC_PORT_DRP:
+ default:
+ ret = sprintf(buf, "source\nsink\n");
+ break;
+ }
+ return ret;
+}
+
+static inline void typec_init_modes(struct typec_altmode *alt,
+ struct typec_mode_desc *desc, bool is_port)
+{
+ int i;
+
+ for (i = 0; i < alt->n_modes; i++, desc++) {
+ struct typec_mode *mode = &alt->modes[i];
+
+ /* Not considering the human readable description critical */
+ mode->desc = kstrdup(desc->desc, GFP_KERNEL);
+ if (desc->desc && !mode->desc)
+ dev_err(&alt->dev, "failed to copy mode%d desc\n", i);
+
+ mode->alt_mode = alt;
+ mode->vdo = desc->vdo;
+ mode->roles = desc->roles;
+ mode->index = desc->index;
+ sprintf(mode->group_name, "mode%d", desc->index);
+
+ sysfs_attr_init(&mode->vdo_attr.attr);
+ mode->vdo_attr.attr.name = "vdo";
+ mode->vdo_attr.attr.mode = 0444;
+ mode->vdo_attr.show = typec_altmode_vdo_show;
+
+ sysfs_attr_init(&mode->desc_attr.attr);
+ mode->desc_attr.attr.name = "description";
+ mode->desc_attr.attr.mode = 0444;
+ mode->desc_attr.show = typec_altmode_desc_show;
+
+ sysfs_attr_init(&mode->active_attr.attr);
+ mode->active_attr.attr.name = "active";
+ mode->active_attr.attr.mode = 0644;
+ mode->active_attr.show = typec_altmode_active_show;
+ mode->active_attr.store = typec_altmode_active_store;
+
+ mode->attrs[0] = &mode->vdo_attr.attr;
+ mode->attrs[1] = &mode->desc_attr.attr;
+ mode->attrs[2] = &mode->active_attr.attr;
+
+ /* With ports, list the roles that the mode is supported with */
+ if (is_port) {
+ sysfs_attr_init(&mode->roles_attr.attr);
+ mode->roles_attr.attr.name = "supported_roles";
+ mode->roles_attr.attr.mode = 0444;
+ mode->roles_attr.show = typec_altmode_roles_show;
+
+ mode->attrs[3] = &mode->roles_attr.attr;
+ }
+
+ mode->group.attrs = mode->attrs;
+ mode->group.name = mode->group_name;
+
+ alt->mode_groups[i] = &mode->group;
+ }
+}
+
+static struct typec_altmode
+*typec_register_altmode(struct device *parent, struct typec_altmode_desc *desc)
+{
+ struct typec_altmode *alt;
+ int ret;
+
+ alt = kzalloc(sizeof(*alt), GFP_KERNEL);
+ if (!alt)
+ return NULL;
+
+ alt->svid = desc->svid;
+ alt->n_modes = desc->n_modes;
+ typec_init_modes(alt, desc->modes, is_typec_port(parent));
+
+ alt->dev.parent = parent;
+ alt->dev.groups = alt->mode_groups;
+ alt->dev.release = typec_altmode_release;
+ dev_set_name(&alt->dev, "%s.svid:%04x", dev_name(parent), alt->svid);
+
+ ret = device_register(&alt->dev);
+ if (ret) {
+ int i;
+
+ dev_err(parent, "failed to register alternate mode (%d)\n",
+ ret);
+
+ put_device(&alt->dev);
+
+ for (i = 0; i < alt->n_modes; i++)
+ kfree(alt->modes[i].desc);
+ kfree(alt);
+ return NULL;
+ }
+
+ return alt;
+}
+
+/**
+ * typec_unregister_altmode - Unregister Alternate Mode
+ * @alt: The alternate mode to be unregistered
+ *
+ * Unregister device created with typec_partner_register_altmode(),
+ * typec_plug_register_altmode() or typec_port_register_altmode().
+ */
+void typec_unregister_altmode(struct typec_altmode *alt)
+{
+ if (alt)
+ device_unregister(&alt->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_altmode);
+
+/* ------------------------------------------------------------------------- */
+/* Type-C Partners */
+
+static ssize_t accessory_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_partner *p = to_typec_partner(dev);
+
+ if (p->accessory == TYPEC_ACCESSORY_NONE)
+ return 0;
+
+ return sprintf(buf, "%s\n", typec_accessory_modes[p->accessory]);
+}
+static DEVICE_ATTR_RO(accessory_mode);
+
+static struct attribute *typec_partner_attrs[] = {
+ &dev_attr_vdo.attr,
+ &dev_attr_accessory_mode.attr,
+ &dev_attr_usb_power_delivery_revision.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(typec_partner);
+
+static void typec_partner_release(struct device *dev)
+{
+ struct typec_partner *partner = to_typec_partner(dev);
+
+ kfree(partner);
+}
+
+static const struct device_type typec_partner_dev_type = {
+ .name = "typec_partner_device",
+ .groups = typec_partner_groups,
+ .release = typec_partner_release,
+};
+
+/**
+ * typec_partner_register_altmode - Register USB Type-C Partner Alternate Mode
+ * @partner: USB Type-C Partner that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register each alternate mode individually that
+ * @partner has listed in response to Discover SVIDs command. The modes for a
+ * SVID listed in response to Discover Modes command need to be listed in an
+ * array in @desc.
+ *
+ * Returns handle to the alternate mode on success or NULL on failure.
+ */
+struct typec_altmode
+*typec_partner_register_altmode(struct typec_partner *partner,
+ struct typec_altmode_desc *desc)
+{
+ return typec_register_altmode(&partner->dev, desc);
+}
+EXPORT_SYMBOL_GPL(typec_partner_register_altmode);
+
+/**
+ * typec_register_partner - Register a USB Type-C Partner
+ * @port: The USB Type-C Port the partner is connected to
+ * @desc: Description of the partner
+ *
+ * Registers a device for USB Type-C Partner described in @desc.
+ *
+ * Returns handle to the partner on success or NULL on failure.
+ */
+struct typec_partner *typec_register_partner(struct typec_port *port,
+ struct typec_partner_desc *desc)
+{
+ struct typec_partner *partner = NULL;
+ int ret;
+
+ partner = kzalloc(sizeof(*partner), GFP_KERNEL);
+ if (!partner)
+ return NULL;
+
+ partner->vdo = desc->vdo;
+ partner->accessory = desc->accessory;
+ partner->pd_revision = desc->pd_revision;
+
+ partner->dev.class = typec_class;
+ partner->dev.parent = &port->dev;
+ partner->dev.type = &typec_partner_dev_type;
+ dev_set_name(&partner->dev, "%s-partner", dev_name(&port->dev));
+
+ ret = device_register(&partner->dev);
+ if (ret) {
+ dev_err(&port->dev, "failed to register partner (%d)\n", ret);
+ put_device(&partner->dev);
+ kfree(partner);
+ return NULL;
+ }
+
+ return partner;
+}
+EXPORT_SYMBOL_GPL(typec_register_partner);
+
+/**
+ * typec_unregister_partner - Unregister a USB Type-C Partner
+ * @partner: The partner to be unregistered
+ *
+ * Unregister device created with typec_register_partner().
+ */
+void typec_unregister_partner(struct typec_partner *partner)
+{
+ if (partner)
+ device_unregister(&partner->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_partner);
+
+/* ------------------------------------------------------------------------- */
+/* Type-C Cable Plugs */
+
+static void typec_plug_release(struct device *dev)
+{
+ struct typec_plug *plug = to_typec_plug(dev);
+
+ kfree(plug);
+}
+
+static const struct device_type typec_plug_dev_type = {
+ .name = "typec_plug_device",
+ .release = typec_plug_release,
+};
+
+/**
+ * typec_plug_register_altmode - Register USB Type-C Cable Plug Alternate Mode
+ * @plug: USB Type-C Cable Plug that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register each alternate mode individually that @plug
+ * has listed in response to Discover SVIDs command. The modes for a SVID that
+ * the plug lists in response to Discover Modes command need to be listed in an
+ * array in @desc.
+ *
+ * Returns handle to the alternate mode on success or NULL on failure.
+ */
+struct typec_altmode
+*typec_plug_register_altmode(struct typec_plug *plug,
+ struct typec_altmode_desc *desc)
+{
+ return typec_register_altmode(&plug->dev, desc);
+}
+EXPORT_SYMBOL_GPL(typec_plug_register_altmode);
+
+/**
+ * typec_register_plug - Register a USB Type-C Cable Plug
+ * @cable: USB Type-C Cable with the plug
+ * @desc: Description of the cable plug
+ *
+ * Registers a device for USB Type-C Cable Plug described in @desc. A USB Type-C
+ * Cable Plug represents a plug with electronics in it that can response to USB
+ * Power Delivery SOP Prime or SOP Double Prime packages.
+ *
+ * Returns handle to the cable plug on success or NULL on failure.
+ */
+struct typec_plug *typec_register_plug(struct typec_cable *cable,
+ struct typec_plug_desc *desc)
+{
+ struct typec_plug *plug = NULL;
+ char name[8];
+ int ret;
+
+ plug = kzalloc(sizeof(*plug), GFP_KERNEL);
+ if (!plug)
+ return NULL;
+
+ sprintf(name, "plug%d", desc->index);
+
+ plug->index = desc->index;
+ plug->dev.class = typec_class;
+ plug->dev.parent = &cable->dev;
+ plug->dev.type = &typec_plug_dev_type;
+ dev_set_name(&plug->dev, "%s-%s", dev_name(cable->dev.parent), name);
+
+ ret = device_register(&plug->dev);
+ if (ret) {
+ dev_err(&cable->dev, "failed to register plug (%d)\n", ret);
+ put_device(&plug->dev);
+ kfree(plug);
+ return NULL;
+ }
+
+ return plug;
+}
+EXPORT_SYMBOL_GPL(typec_register_plug);
+
+/**
+ * typec_unregister_plug - Unregister a USB Type-C Cable Plug
+ * @plug: The cable plug to be unregistered
+ *
+ * Unregister device created with typec_register_plug().
+ */
+void typec_unregister_plug(struct typec_plug *plug)
+{
+ if (plug)
+ device_unregister(&plug->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_plug);
+
+/* Type-C Cables */
+
+static ssize_t
+active_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct typec_cable *cable = to_typec_cable(dev);
+
+ return sprintf(buf, "%d\n", cable->active);
+}
+static DEVICE_ATTR_RO(active);
+
+static const char * const typec_plug_types[] = {
+ [USB_PLUG_NONE] = "Unknown",
+ [USB_PLUG_TYPE_A] = "Type-A",
+ [USB_PLUG_TYPE_B] = "Type-B",
+ [USB_PLUG_TYPE_C] = "Type-C",
+ [USB_PLUG_CAPTIVE] = "Captive",
+};
+
+static ssize_t plug_type_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct typec_cable *cable = to_typec_cable(dev);
+
+ return sprintf(buf, "%s\n", typec_plug_types[cable->type]);
+}
+static DEVICE_ATTR_RO(plug_type);
+
+static struct attribute *typec_cable_attrs[] = {
+ &dev_attr_active.attr,
+ &dev_attr_plug_type.attr,
+ &dev_attr_usb_power_delivery_revision.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(typec_cable);
+
+static void typec_cable_release(struct device *dev)
+{
+ struct typec_cable *cable = to_typec_cable(dev);
+
+ kfree(cable);
+}
+
+static const struct device_type typec_cable_dev_type = {
+ .name = "typec_cable_device",
+ .groups = typec_cable_groups,
+ .release = typec_cable_release,
+};
+
+/**
+ * typec_register_cable - Register a USB Type-C Cable
+ * @port: The USB Type-C Port the cable is connected to
+ * @desc: Description of the cable
+ *
+ * Registers a device for USB Type-C Cable described in @desc. The cable will be
+ * parent for the optional cable plug devises.
+ *
+ * Returns handle to the cable on success or NULL on failure.
+ */
+struct typec_cable *typec_register_cable(struct typec_port *port,
+ struct typec_cable_desc *desc)
+{
+ struct typec_cable *cable = NULL;
+ int ret;
+
+ cable = kzalloc(sizeof(*cable), GFP_KERNEL);
+ if (!cable)
+ return NULL;
+
+ cable->type = desc->type;
+ cable->vdo = desc->vdo;
+ cable->active = desc->active;
+ cable->pd_revision = desc->pd_revision;
+
+ cable->dev.class = typec_class;
+ cable->dev.parent = &port->dev;
+ cable->dev.type = &typec_cable_dev_type;
+ dev_set_name(&cable->dev, "%s-cable", dev_name(&port->dev));
+
+ ret = device_register(&cable->dev);
+ if (ret) {
+ dev_err(&port->dev, "failed to register cable (%d)\n", ret);
+ put_device(&cable->dev);
+ kfree(cable);
+ return NULL;
+ }
+
+ return cable;
+}
+EXPORT_SYMBOL_GPL(typec_register_cable);
+
+/**
+ * typec_unregister_cable - Unregister a USB Type-C Cable
+ * @cable: The cable to be unregistered
+ *
+ * Unregister device created with typec_register_cable().
+ */
+void typec_unregister_cable(struct typec_cable *cable)
+{
+ if (cable)
+ device_unregister(&cable->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_cable);
+
+/* ------------------------------------------------------------------------- */
+/* USB Type-C ports */
+
+/* --------------------------------------- */
+/* Driver callbacks to report role updates */
+
+/**
+ * typec_set_data_role - Report data role change
+ * @port: The USB Type-C Port where the role was changed
+ * @role: The new data role
+ *
+ * This routine is used by the port drivers to report data role changes.
+ */
+void typec_set_data_role(struct typec_port *port, enum typec_data_role role)
+{
+ if (port->data_role == role)
+ return;
+
+ port->data_role = role;
+ sysfs_notify(&port->dev.kobj, NULL, "current_data_role");
+ kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_data_role);
+
+/**
+ * typec_set_pwr_role - Report power role change
+ * @port: The USB Type-C Port where the role was changed
+ * @role: The new data role
+ *
+ * This routine is used by the port drivers to report power role changes.
+ */
+void typec_set_pwr_role(struct typec_port *port, enum typec_role role)
+{
+ if (port->pwr_role == role)
+ return;
+
+ port->pwr_role = role;
+ sysfs_notify(&port->dev.kobj, NULL, "current_power_role");
+ kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_pwr_role);
+
+/**
+ * typec_set_pwr_role - Report VCONN source change
+ * @port: The USB Type-C Port which VCONN role changed
+ * @role: Source when @port is sourcing VCONN, or Sink when it's not
+ *
+ * This routine is used by the port drivers to report if the VCONN source is
+ * changes.
+ */
+void typec_set_vconn_role(struct typec_port *port, enum typec_role role)
+{
+ if (port->vconn_role == role)
+ return;
+
+ port->vconn_role = role;
+ sysfs_notify(&port->dev.kobj, NULL, "vconn_source");
+ kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_vconn_role);
+
+/**
+ * typec_set_pwr_opmode - Report changed power operation mode
+ * @port: The USB Type-C Port where the mode was changed
+ * @opmode: New power operation mode
+ *
+ * This routine is used by the port drivers to report changed power operation
+ * mode in @port. The modes are USB (default), 1.5A, 3.0A as defined in USB
+ * Type-C specification, and "USB Power Delivery" when the power levels are
+ * negotiated with methods defined in USB Power Delivery specification.
+ */
+void typec_set_pwr_opmode(struct typec_port *port,
+ enum typec_pwr_opmode opmode)
+{
+ if (port->pwr_opmode == opmode)
+ return;
+
+ port->pwr_opmode = opmode;
+ sysfs_notify(&port->dev.kobj, NULL, "power_operation_mode");
+ kobject_uevent(&port->dev.kobj, KOBJ_CHANGE);
+}
+EXPORT_SYMBOL_GPL(typec_set_pwr_opmode);
+
+/* --------------------------------------- */
+
+static const char * const typec_roles[] = {
+ [TYPEC_SINK] = "sink",
+ [TYPEC_SOURCE] = "source",
+};
+
+static const char * const typec_data_roles[] = {
+ [TYPEC_DEVICE] = "device",
+ [TYPEC_HOST] = "host",
+};
+
+static ssize_t
+preferred_role_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_port *port = to_typec_port(dev);
+ int role;
+ int ret;
+
+ if (port->cap->type != TYPEC_PORT_DRP) {
+ dev_dbg(dev, "Preferred role only supported with DRP ports\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!port->cap->try_role) {
+ dev_dbg(dev, "Setting preferred role not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ role = sysfs_match_string(typec_roles, buf);
+ if (role < 0) {
+ if (sysfs_streq(buf, "none"))
+ role = TYPEC_NO_PREFERRED_ROLE;
+ else
+ return -EINVAL;
+ }
+
+ ret = port->cap->try_role(port->cap, role);
+ if (ret)
+ return ret;
+
+ port->prefer_role = role;
+ return size;
+}
+
+static ssize_t
+preferred_role_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ if (port->cap->type != TYPEC_PORT_DRP)
+ return 0;
+
+ if (port->prefer_role < 0)
+ return 0;
+
+ return sprintf(buf, "%s\n", typec_roles[port->prefer_role]);
+}
+static DEVICE_ATTR_RW(preferred_role);
+
+static ssize_t
+current_data_role_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_port *port = to_typec_port(dev);
+ int ret;
+
+ if (port->cap->type != TYPEC_PORT_DRP) {
+ dev_dbg(dev, "data role swap only supported with DRP ports\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!port->cap->dr_set) {
+ dev_dbg(dev, "data role swapping not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ ret = sysfs_match_string(typec_data_roles, buf);
+ if (ret < 0)
+ return ret;
+
+ ret = port->cap->dr_set(port->cap, ret);
+ if (ret)
+ return ret;
+
+ return size;
+}
+
+static ssize_t
+current_data_role_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ return sprintf(buf, "%s\n", typec_data_roles[port->data_role]);
+}
+static DEVICE_ATTR_RW(current_data_role);
+
+static ssize_t supported_data_roles_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ if (port->cap->type == TYPEC_PORT_DRP)
+ return sprintf(buf, "host\ndevice\n");
+
+ return sprintf(buf, "%s\n", typec_data_roles[port->data_role]);
+}
+static DEVICE_ATTR_RO(supported_data_roles);
+
+static ssize_t current_power_role_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_port *port = to_typec_port(dev);
+ int ret = size;
+
+ if (!port->cap->pd_revision) {
+ dev_dbg(dev, "power role swap only supported with USB PD\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!port->cap->pr_set) {
+ dev_dbg(dev, "power role swapping not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (port->pwr_opmode != TYPEC_PWR_MODE_PD) {
+ dev_dbg(dev, "partner unable to swap power role\n");
+ return -EIO;
+ }
+
+ ret = sysfs_match_string(typec_roles, buf);
+ if (ret < 0)
+ return ret;
+
+ ret = port->cap->pr_set(port->cap, ret);
+ if (ret)
+ return ret;
+
+ return size;
+}
+
+static ssize_t current_power_role_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ return sprintf(buf, "%s\n", typec_roles[port->pwr_role]);
+}
+static DEVICE_ATTR_RW(current_power_role);
+
+static ssize_t supported_power_roles_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ if (port->cap->pd_revision || port->cap->type == TYPEC_PORT_DRP)
+ return sprintf(buf, "source\nsink\n");
+
+ return sprintf(buf, "%s\n", typec_roles[port->pwr_role]);
+}
+static DEVICE_ATTR_RO(supported_power_roles);
+
+static const char * const typec_pwr_opmodes[] = {
+ [TYPEC_PWR_MODE_USB] = "USB",
+ [TYPEC_PWR_MODE_1_5A] = "USB Type-C 1.5A",
+ [TYPEC_PWR_MODE_3_0A] = "USB Type-C 3.0A",
+ [TYPEC_PWR_MODE_PD] = "USB Power Delivery",
+};
+
+static ssize_t power_operation_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ return sprintf(buf, "%s\n", typec_pwr_opmodes[port->pwr_opmode]);
+}
+static DEVICE_ATTR_RO(power_operation_mode);
+
+static ssize_t vconn_source_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct typec_port *port = to_typec_port(dev);
+ enum typec_role role;
+ int ret;
+
+ if (!port->cap->pd_revision) {
+ dev_dbg(dev, "vconn swap only supported with USB PD\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (!port->cap->vconn_set) {
+ dev_dbg(dev, "vconn swapping not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (sysfs_streq(buf, "1"))
+ role = TYPEC_SOURCE;
+ else if (sysfs_streq(buf, "0"))
+ role = TYPEC_SINK;
+ else
+ return -EINVAL;
+
+ ret = port->cap->vconn_set(port->cap, role);
+ if (ret)
+ return ret;
+
+ return size;
+}
+
+static ssize_t vconn_source_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ return sprintf(buf, "%d\n", port->vconn_role == TYPEC_SOURCE ? 1 : 0);
+}
+static DEVICE_ATTR_RW(vconn_source);
+
+static ssize_t supported_accessory_modes_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+ ssize_t ret = 0;
+ int i;
+
+ if (!port->cap->accessory)
+ return 0;
+
+ for (i = 0; port->cap->accessory[i]; i++)
+ ret += sprintf(buf + ret, "%s\n",
+ typec_accessory_modes[port->cap->accessory[i]]);
+ return ret;
+}
+static DEVICE_ATTR_RO(supported_accessory_modes);
+
+static ssize_t usb_typec_revision_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct typec_port *port = to_typec_port(dev);
+ u16 rev = port->cap->revision;
+
+ return sprintf(buf, "%d.%d\n", (rev >> 8) & 0xff, rev >> 4 & 0xf);
+}
+static DEVICE_ATTR_RO(usb_typec_revision);
+
+static struct attribute *typec_attrs[] = {
+ &dev_attr_current_power_role.attr,
+ &dev_attr_current_data_role.attr,
+ &dev_attr_power_operation_mode.attr,
+ &dev_attr_preferred_role.attr,
+ &dev_attr_supported_accessory_modes.attr,
+ &dev_attr_supported_data_roles.attr,
+ &dev_attr_supported_power_roles.attr,
+ &dev_attr_usb_power_delivery_revision.attr,
+ &dev_attr_usb_typec_revision.attr,
+ &dev_attr_vconn_source.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(typec);
+
+static int typec_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ int ret;
+
+ ret = add_uevent_var(env, "TYPEC_PORT=%s", dev_name(dev));
+ if (ret)
+ dev_err(dev, "failed to add uevent TYPEC_PORT\n");
+
+ return ret;
+}
+
+static void typec_release(struct device *dev)
+{
+ struct typec_port *port = to_typec_port(dev);
+
+ ida_simple_remove(&typec_index_ida, port->id);
+ kfree(port);
+}
+
+static const struct device_type typec_port_dev_type = {
+ .name = "typec_port",
+ .groups = typec_groups,
+ .uevent = typec_uevent,
+ .release = typec_release,
+};
+
+/**
+ * typec_port_register_altmode - Register USB Type-C Port Alternate Mode
+ * @port: USB Type-C Port that supports the alternate mode
+ * @desc: Description of the alternate mode
+ *
+ * This routine is used to register an alternate mode that @port is capable of
+ * supporting.
+ *
+ * Returns handle to the alternate mode on success or NULL on failure.
+ */
+struct typec_altmode
+*typec_port_register_altmode(struct typec_port *port,
+ struct typec_altmode_desc *desc)
+{
+ return typec_register_altmode(&port->dev, desc);
+}
+EXPORT_SYMBOL_GPL(typec_port_register_altmode);
+
+/**
+ * typec_register_port - Register a USB Type-C Port
+ * @parent: Parent device
+ * @cap: Description of the port
+ *
+ * Registers a device for USB Type-C Port described in @cap.
+ *
+ * Returns handle to the port on success or NULL on failure.
+ */
+struct typec_port *typec_register_port(struct device *parent,
+ const struct typec_capability *cap)
+{
+ struct typec_port *port;
+ enum typec_role role;
+ int ret;
+ int id;
+
+ port = kzalloc(sizeof(*port), GFP_KERNEL);
+ if (!port)
+ return NULL;
+
+ id = ida_simple_get(&typec_index_ida, 0, 0, GFP_KERNEL);
+ if (id < 0) {
+ kfree(port);
+ return NULL;
+ }
+
+ if (cap->type == TYPEC_PORT_DFP)
+ role = TYPEC_SOURCE;
+ else if (cap->type == TYPEC_PORT_UFP)
+ role = TYPEC_SINK;
+ else
+ role = cap->prefer_role;
+
+ if (role == TYPEC_SOURCE) {
+ port->data_role = TYPEC_HOST;
+ port->pwr_role = TYPEC_SOURCE;
+ port->vconn_role = TYPEC_SOURCE;
+ } else {
+ port->data_role = TYPEC_DEVICE;
+ port->pwr_role = TYPEC_SINK;
+ port->vconn_role = TYPEC_SINK;
+ }
+
+ port->id = id;
+ port->cap = cap;
+ port->prefer_role = cap->prefer_role;
+
+ port->dev.type = &typec_port_dev_type;
+ port->dev.class = typec_class;
+ port->dev.parent = parent;
+ dev_set_name(&port->dev, "port%d", id);
+
+ ret = device_register(&port->dev);
+ if (ret) {
+ dev_err(parent, "failed to register port (%d)\n", ret);
+ ida_simple_remove(&typec_index_ida, id);
+ put_device(&port->dev);
+ kfree(port);
+ return NULL;
+ }
+
+ return port;
+}
+EXPORT_SYMBOL_GPL(typec_register_port);
+
+/**
+ * typec_unregister_port - Unregister a USB Type-C Port
+ * @port: The port to be unregistered
+ *
+ * Unregister device created with typec_register_port().
+ */
+void typec_unregister_port(struct typec_port *port)
+{
+ if (port)
+ device_unregister(&port->dev);
+}
+EXPORT_SYMBOL_GPL(typec_unregister_port);
+
+static int __init typec_init(void)
+{
+ typec_class = class_create(THIS_MODULE, "typec");
+ if (IS_ERR(typec_class))
+ return PTR_ERR(typec_class);
+ return 0;
+}
+subsys_initcall(typec_init);
+
+static void __exit typec_exit(void)
+{
+ class_destroy(typec_class);
+ ida_destroy(&typec_index_ida);
+}
+module_exit(typec_exit);
+
+MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("USB Type-C Connector Class");
diff --git a/include/linux/usb/typec.h b/include/linux/usb/typec.h
new file mode 100644
index 000000000000..37b996c8cb72
--- /dev/null
+++ b/include/linux/usb/typec.h
@@ -0,0 +1,212 @@
+
+#ifndef __LINUX_USB_TYPEC_H
+#define __LINUX_USB_TYPEC_H
+
+#include <linux/types.h>
+
+/* USB Type-C Specification releases */
+#define USB_TYPEC_REV_1_0 0x100 /* 1.0 */
+#define USB_TYPEC_REV_1_1 0x110 /* 1.1 */
+#define USB_TYPEC_REV_1_2 0x120 /* 1.2 */
+
+struct typec_altmode;
+struct typec_partner;
+struct typec_cable;
+struct typec_plug;
+struct typec_port;
+
+enum typec_port_type {
+ TYPEC_PORT_DFP,
+ TYPEC_PORT_UFP,
+ TYPEC_PORT_DRP,
+};
+
+enum typec_plug_type {
+ USB_PLUG_NONE,
+ USB_PLUG_TYPE_A,
+ USB_PLUG_TYPE_B,
+ USB_PLUG_TYPE_C,
+ USB_PLUG_CAPTIVE,
+};
+
+enum typec_data_role {
+ TYPEC_DEVICE,
+ TYPEC_HOST,
+};
+
+enum typec_role {
+ TYPEC_SINK,
+ TYPEC_SOURCE,
+};
+
+enum typec_pwr_opmode {
+ TYPEC_PWR_MODE_USB,
+ TYPEC_PWR_MODE_1_5A,
+ TYPEC_PWR_MODE_3_0A,
+ TYPEC_PWR_MODE_PD,
+};
+
+enum typec_accessory {
+ TYPEC_ACCESSORY_NONE,
+ TYPEC_ACCESSORY_AUDIO,
+ TYPEC_ACCESSORY_DEBUG,
+};
+
+/*
+ * struct typec_mode_desc - Individual Mode of an Alternate Mode
+ * @index: Index of the Mode within the SVID
+ * @vdo: VDO returned by Discover Modes USB PD command
+ * @desc: Optional human readable description of the mode
+ * @roles: Only for ports. DRP if the mode is available in both roles
+ *
+ * Description of a mode of an Alternate Mode which a connector, cable plug or
+ * partner supports. Every mode will have it's own sysfs group. The details are
+ * the VDO returned by discover modes command, description for the mode and
+ * active flag telling has the mode being entered or not.
+ */
+struct typec_mode_desc {
+ int index;
+ u32 vdo;
+ char *desc;
+ /* Only used with ports */
+ enum typec_port_type roles;
+};
+
+/*
+ * struct typec_altmode_desc - USB Type-C Alternate Mode Descriptor
+ * @svid: Standard or Vendor ID
+ * @n_modes: Number of modes
+ * @modes: Array of modes supported by the Alternate Mode
+ *
+ * Representation of an Alternate Mode that has SVID assigned by USB-IF. The
+ * array of modes will list the modes of a particular SVID that are supported by
+ * a connector, partner of a cable plug.
+ */
+struct typec_altmode_desc {
+ u16 svid;
+ int n_modes;
+ struct typec_mode_desc *modes;
+};
+
+struct typec_altmode
+*typec_partner_register_altmode(struct typec_partner *partner,
+ struct typec_altmode_desc *desc);
+struct typec_altmode
+*typec_plug_register_altmode(struct typec_plug *plug,
+ struct typec_altmode_desc *desc);
+struct typec_altmode
+*typec_port_register_altmode(struct typec_port *port,
+ struct typec_altmode_desc *desc);
+void typec_unregister_altmode(struct typec_altmode *altmode);
+
+struct typec_port *typec_altmode2port(struct typec_altmode *alt);
+
+void typec_altmode_update_active(struct typec_altmode *alt, int mode,
+ bool active);
+
+enum typec_plug_index {
+ TYPEC_PLUG_SOP_P,
+ TYPEC_PLUG_SOP_PP,
+};
+
+/*
+ * struct typec_plug_desc - USB Type-C Cable Plug Descriptor
+ * @index: SOP Prime for the plug connected to DFP and SOP Double Prime for the
+ * plug connected to UFP
+ *
+ * Represents USB Type-C Cable Plug.
+ */
+struct typec_plug_desc {
+ enum typec_plug_index index;
+};
+
+/*
+ * struct typec_cable_desc - USB Type-C Cable Descriptor
+ * @pd_revision: USB Power Delivery Specification revision
+ * @type: The plug type from USB PD Cable VDO
+ * @active: Is the cable active or passive
+ *
+ * Represents USB Type-C Cable attached to USB Type-C port.
+ */
+struct typec_cable_desc {
+ u16 pd_revision; /* 0300H = "3.0" */
+ enum typec_plug_type type;
+ u32 vdo;
+ unsigned int active:1;
+};
+
+/*
+ * struct typec_partner_desc - USB Type-C Partner Descriptor
+ * @pd_revision: USB Power Delivery Specification revision (0 = no USB PD)
+ * @vdo: VDO returned by Discover Identity USB PD command
+ * @accessory: Audio, Debug or none.
+ *
+ * Details about a partner that is attached to USB Type-C port.
+ */
+struct typec_partner_desc {
+ u16 pd_revision; /* 0300H = "3.0" */
+ u32 vdo;
+ enum typec_accessory accessory;
+};
+
+/*
+ * struct typec_capability - USB Type-C Port Capabilities
+ * @role: DFP (Host-only), UFP (Device-only) or DRP (Dual Role)
+ * @revision: USB Type-C Specification release. Binary coded decimal
+ * @pd_revision: USB Power Delivery Specification revision if supported
+ * @prefer_role: Initial role preference
+ * @accessory: Supported Accessory Modes (NULL terminated array)
+ * @try_role: Set data role preference for DRP port
+ * @dr_set: Set Data Role
+ * @pr_set: Set Power Role
+ * @vconn_set: Set VCONN Role
+ * @activate_mode: Enter/exit given Alternate Mode
+ *
+ * Static capabilities of a single USB Type-C port.
+ */
+struct typec_capability {
+ enum typec_port_type type;
+ u16 revision; /* 0120H = "1.2" */
+ u16 pd_revision; /* 0300H = "3.0" */
+ int prefer_role;
+ enum typec_accessory *accessory;
+
+ int (*try_role)(const struct typec_capability *,
+ int role);
+
+ int (*dr_set)(const struct typec_capability *,
+ enum typec_data_role);
+ int (*pr_set)(const struct typec_capability *,
+ enum typec_role);
+ int (*vconn_set)(const struct typec_capability *,
+ enum typec_role);
+
+ int (*activate_mode)(const struct typec_capability *,
+ int mode, int activate);
+};
+
+/* Specific to try_role(). Indicates the user want's to clear the preference. */
+#define TYPEC_NO_PREFERRED_ROLE (-1)
+
+struct typec_port *typec_register_port(struct device *parent,
+ const struct typec_capability *cap);
+void typec_unregister_port(struct typec_port *port);
+
+struct typec_partner *typec_register_partner(struct typec_port *port,
+ struct typec_partner_desc *desc);
+void typec_unregister_partner(struct typec_partner *partner);
+
+struct typec_cable *typec_register_cable(struct typec_port *port,
+ struct typec_cable_desc *desc);
+void typec_unregister_cable(struct typec_cable *cable);
+
+struct typec_plug *typec_register_plug(struct typec_cable *cable,
+ struct typec_plug_desc *desc);
+void typec_unregister_plug(struct typec_plug *plug);
+
+void typec_set_data_role(struct typec_port *port, enum typec_data_role role);
+void typec_set_pwr_role(struct typec_port *port, enum typec_role role);
+void typec_set_vconn_role(struct typec_port *port, enum typec_role role);
+void typec_set_pwr_opmode(struct typec_port *port, enum typec_pwr_opmode mode);
+
+#endif /* __LINUX_USB_TYPEC_H */
--
2.11.0