[PATCH 0/3] Input: add optional enable gpio to pwm-beeper

[David Lechner]

This series adds an optional enable gpio to the pwm-beeper driver. This is for
cases when the beeper needs to be "enabled", for example, if there is an
amplifier that drives the speaker that is not always on.

David Lechner (3):
  Input: pwm-beeper: suppress error message on probe defer
  dt-bindings: Input: Add enable-gpios to pwm-beeper
  Input: pwm-beeper: add optional enable gpio

 .../devicetree/bindings/input/pwm-beeper.txt       | 11 +++++++++
 drivers/input/misc/pwm-beeper.c                    | 27 ++++++++++++++++++----
 2 files changed, 34 insertions(+), 4 deletions(-)

-- 
2.7.4