RE: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings

[Y.T. Tang]

Seems like Troy's email client has issues which causes his reply is unreadable in patchwork.
Please ignore it in patchwork. 

Regards,
Yuantian

> -----Original Message-----
> From: Troy Jia
> Sent: Thursday, January 05, 2017 10:29 AM
> To: Scott Wood <oss@xxxxxxxxxxxx>; rui.zhang@xxxxxxxxx;
> edubezval@xxxxxxxxx; Y.T. Tang <yuantian.tang@xxxxxxx>;
> robh+dt@xxxxxxxxxx
> Cc: linux-pm@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx
> Subject: RE: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal bindings
> 
> 
> 
> > -----Original Message-----
> > From: Scott Wood [mailto:oss@xxxxxxxxxxxx]
> > Sent: Wednesday, January 04, 2017 6:38 PM
> > To: Troy Jia <hongtao.jia@xxxxxxx>; rui.zhang@xxxxxxxxx;
> > edubezval@xxxxxxxxx; Y.T. Tang <yuantian.tang@xxxxxxx>;
> > robh+dt@xxxxxxxxxx
> > Cc: linux-pm@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH 1/3] dt-bindings: Update QorIQ TMU thermal
> > bindings
> >
> > On Wed, 2017-01-04 at 16:57 +0800, Jia Hongtao wrote:
> > > For different types of SoC the sensor id and endianness may vary.
> > > "#thermal-sensor-cells" is used to provide sensor id information.
> > > "little-endian" property is to tell the endianness of TMU.
> > >
> > > Signed-off-by: Jia Hongtao <hongtao.jia@xxxxxxx>
> > > Acked-by: Rob Herring <robh@xxxxxxxxxx>
> > > ---
> > > ÂDocumentation/devicetree/bindings/thermal/qoriq-thermal.txt | 7
> > > +++++++
> > > Â1 file changed, 7 insertions(+)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > index 66223d5..20ca4ef 100644
> > > --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt
> > > @@ -17,6 +17,12 @@ Required properties:
> > > Â	calibration data, as specified by the SoC reference manual.
> > > Â	The first cell of each pair is the value to be written to TTCFGR,
> > > Â	and the second is the value to be written to TSCFGR.
> > > +- #thermal-sensor-cells : Must be 1. The sensor specifier is the
> monitoring
> > > +	site ID, and represents the "n" in TRITSRn and TRATSRn.
> >
> > I assume the driver will continue to work with existing device trees
> > where this information is absent? ÂIf so, ACK for the whole series.
> 
> Yes. The driver works for all existing device trees.
> 
> Thanks for the ACK.
> 
> >
> > -Scott