Re: Fixed link for 10G

[Andrew Lunn]

On Fri, Jan 06, 2017 at 12:01:06PM +0000, Madalin-Cristian Bucur wrote:
> Hi Florian,
> 
> I'm trying to add a fixed-link property that declares 10G speed
> for a XGMII PHY and I'm encountering some issues as the fixed
> link infrastructure does not seem to support this speed.
> 
> I'm using this device tree snippet (using the legacy format, but it
> should not matter):
> 
>         ethernet@f2000 { /* 10GEC2 */
>                 fixed-link = <0 1 10000 0 0>;
>                 phy-connection-type = "xgmii";
>         };
> 
> and I get this error:
> 
> 	[    0.464238] swphy: unknown speed
> 	[    0.467464] fsl_mac: probe of 1af2000.ethernet failed with error -22
> 
> Looking at the code, fixed_phy_register() seems to check for speeds up
> to 1G and swphy only caters 1G and lower speeds, the swphy_decode_speed()
> returning -EINVAL for 10G, triggering the error printed above in
> swphy_validate_state().
> 
> What would be the proper way to add support for the 10G fixed link speed?

Hi Madalin

I came across the same issue a couple of months ago. But i found a
different way to solve my problem.

Anyway, fixed-link emulates a PHY. It has the common PHY registers,
and sets the register values to indicate the device tree
configuration.

As you have found out, it only emulates 10/100/1000. For 10G, you need
to extend the emulation to include the 10G registers. Assuming the 10G
registers are standardised.

	  Andrew