[PATCH v2 0/7] net: ethernet: ti: cpsw: support placing CPDMA descriptors into DDR
From: Grygorii Strashko
Date: Fri Jan 06 2017 - 15:08:58 EST
This series intended to add support for placing CPDMA descriptors into DDR by
introducing new module parameter "descs_pool_size" to specify size of descriptor's
pool. The "descs_pool_size" defines total number of CPDMA
CPPI descriptors to be used for both ingress/egress packets
processing. If not specified - the default value 256 will be used
which will allow to place descriptor's pool into the internal CPPI
RAM.
In addition, added ability to re-split CPDMA pool of descriptors between RX and TX
path via ethtool '-G' command wich will allow to configure and fix number
of descriptors used by RX and TX path, which, then, will be split between
RX/TX channels proportionally depending on number of RX/TX channels and
its weight.
This allows significantly to reduce UDP packets drop rate
for bandwidth >301 Mbits/sec (am57x).
Before enabling this feature, the am437x SoC has to be fixed as it's proved
that it's not working when CPDMA descriptors placed in DDR.
So, the patch 1 fixes this issue.
Grygorii Strashko (7):
net: ethernet: ti: cpdma: am437x: allow descs to be plased in ddr
net: ethernet: ti: cpdma: fix desc re-queuing
net: ethernet: ti: cpdma: minimize number of parameters in
cpdma_desc_pool_create/destroy()
net: ethernet: ti: cpdma: use devm_ioremap
net: ethernet: ti: cpsw: add support for descs pool size configuration
net: ethernet: ti: cpsw: add support for ringparam configuration
Documentation: DT: net: cpsw: remove no_bd_ram property
Documentation/devicetree/bindings/net/cpsw.txt | 3 -
arch/arm/boot/dts/am33xx.dtsi | 1 -
arch/arm/boot/dts/am4372.dtsi | 1 -
arch/arm/boot/dts/dm814x.dtsi | 1 -
arch/arm/boot/dts/dra7.dtsi | 1 -
drivers/net/ethernet/ti/cpsw.c | 98 ++++++++++++++-
drivers/net/ethernet/ti/davinci_cpdma.c | 161 +++++++++++++++----------
drivers/net/ethernet/ti/davinci_cpdma.h | 5 +
8 files changed, 199 insertions(+), 72 deletions(-)
--
2.10.1.dirty