[PATCH] Documentation: display: fix wrong documentation paths
From: Yegor Yefremov
Date: Sat Jan 07 2017 - 16:16:09 EST
Signed-off-by: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/display/arm,pl11x.txt | 2 +-
Documentation/devicetree/bindings/display/bridge/analogix_dp.txt | 2 +-
Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt | 2 +-
Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt | 2 +-
Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt | 2 +-
Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 +-
Documentation/devicetree/bindings/display/imx/ldb.txt | 2 +-
Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt | 2 +-
Documentation/devicetree/bindings/display/msm/dsi.txt | 2 +-
Documentation/devicetree/bindings/display/msm/edp.txt | 2 +-
Documentation/devicetree/bindings/display/msm/hdmi.txt | 2 +-
Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt | 2 +-
Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt | 2 +-
.../devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt | 2 +-
Documentation/devicetree/bindings/display/tilcdc/panel.txt | 2 +-
15 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/arm,pl11x.txt b/Documentation/devicetree/bindings/display/arm,pl11x.txt
index 3e3039a..ef89ab4 100644
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
@@ -22,7 +22,7 @@ Required properties:
- clocks: contains phandle and clock specifier pairs for the entries
in the clock-names property. See
- Documentation/devicetree/binding/clock/clock-bindings.txt
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
Optional properties:
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
index 4a0f4f7..0c7473dd 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
+++ b/Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
@@ -33,7 +33,7 @@ Optional properties for dp-controller:
in Documentation/devicetree/bindings/media/video-interfaces.txt,
please refer to the SoC specific binding document:
* Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
- * Documentation/devicetree/bindings/video/analogix_dp-rockchip.txt
+ * Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
-------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
index e9c6574..b0e5066 100644
--- a/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
+++ b/Documentation/devicetree/bindings/display/cirrus,clps711x-fb.txt
@@ -6,7 +6,7 @@ Required properties:
location and size of the framebuffer memory.
- clocks : phandle + clock specifier pair of the FB reference clock.
- display : phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
Additionally, the display node has to define properties:
- bits-per-pixel: Bits per pixel.
- ac-prescale : LCD AC bias frequency. This frequency is the required
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
index 3938caa..027d6c2 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt
@@ -38,7 +38,7 @@ Optional Properties:
Can be used in case timings cannot be provided otherwise
or to override timings provided by the panel.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index c7c6b9a..18645e0 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -83,7 +83,7 @@ in [2]. The following are properties specific to those nodes:
3 - for parallel output,
4 - for write-back interface
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 00d5f8e..7a5c0e2 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -9,7 +9,7 @@ Required properties:
Required nodes:
- display: Phandle to a display node as described in
- Documentation/devicetree/bindings/display/display-timing.txt
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index a407462..38c637f 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -64,7 +64,7 @@ Required properties:
Optional properties (required if display-timings are used):
- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- display-timings : A node that describes the display timings as defined in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
This describes how the color bits are laid out in the
serialized LVDS signal.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
index db6e77e..708f566 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,disp.txt
@@ -55,7 +55,7 @@ Required properties (DMA function blocks):
"mediatek,<chip>-disp-rdma"
"mediatek,<chip>-disp-wdma"
- larb: Should contain a phandle pointing to the local arbiter device as defined
- in Documentation/devicetree/bindings/soc/mediatek/mediatek,smi-larb.txt
+ in Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
- iommus: Should point to the respective IOMMU block with master port as
argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
for details.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index 6b1cab1..fa00e62 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -108,7 +108,7 @@ Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
-[1] Documentation/devicetree/bindings/clocks/clock-bindings.txt
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/display/panel/
diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt
index 3a20f6e..e63032b 100644
--- a/Documentation/devicetree/bindings/display/msm/edp.txt
+++ b/Documentation/devicetree/bindings/display/msm/edp.txt
@@ -10,7 +10,7 @@ Required properties:
- interrupts: The interrupt signal from the eDP block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: the following clocks are required:
* "core_clk"
* "iface_clk"
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 2ad5789..2d306f4 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -49,7 +49,7 @@ Required properties:
* "hdmi_tx_l4"
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: device clocks
- See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- core-vdda-supply: phandle to vdda regulator device node
Example:
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
index fc595d9..354d4d1 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
@@ -20,7 +20,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [3]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
index 25701c8..9e766c5 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
@@ -21,7 +21,7 @@ The device node can contain one 'port' child node with one child
'endpoint' node, according to the bindings defined in [2]. This
node should describe panel's video bus.
-[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
diff --git a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
index 01cced1..47665a1 100644
--- a/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/analogix_dp-rockchip.txt
@@ -35,7 +35,7 @@ Optional property for different chips:
Required elements: "grf"
For the below properties, please refer to Analogix DP binding document:
- * Documentation/devicetree/bindings/drm/bridge/analogix_dp.txt
+ * Documentation/devicetree/bindings/display/bridge/analogix_dp.txt
- phys (required)
- phy-names (required)
- hpd-gpios (optional)
diff --git a/Documentation/devicetree/bindings/display/tilcdc/panel.txt b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
index f20b31c..8082163 100644
--- a/Documentation/devicetree/bindings/display/tilcdc/panel.txt
+++ b/Documentation/devicetree/bindings/display/tilcdc/panel.txt
@@ -15,7 +15,7 @@ Required properties:
- display-timings: typical videomode of lcd panel. Multiple video modes
can be listed if the panel supports multiple timings, but the 'native-mode'
should be the preferred/default resolution. Refer to
- Documentation/devicetree/bindings/display/display-timing.txt for display
+ Documentation/devicetree/bindings/display/panel/display-timing.txt for display
timing binding details.
Optional properties:
--
2.7.4