Re: Problem on SCTP
From: Sun Paul
Date: Sun Jan 08 2017 - 21:33:45 EST
OK. I actually verified the connectivity using SSH to port 22. it
works. so I do not have any idea why it has problem on SCTP.
need more help on this. is there anyway to enable debug? the version
that I am using is lksctp-tools-1.0.10-7
On Mon, Jan 9, 2017 at 10:08 AM, Sun Paul <paulrbk@xxxxxxxxx> wrote:
> Hi
>
> the INIT chunk arrive on the SERVER, but then no response. the
> application that using in SERVER is the same as the other test.
>
> I noticed one thing in Ethernet frame of the incoming packet on the
> SERVER compared to the one captured from the client is the LG bit on
> the source address.
>
> The LG bit is set to 0 on the request packet received in the
> SERVER,but it is 0 from the one originated on the client. willl it be
> the root cause?
>
>
>
> On Fri, Jan 6, 2017 at 8:37 PM, Neil Horman <nhorman@xxxxxxxxxxxxx> wrote:
>> On Fri, Jan 06, 2017 at 05:34:47PM +0800, Sun Paul wrote:
>>> Hi
>>>
>>> I am setting up a lab where the SCTP traffics from client is passing
>>> through a linux router before reaching to the SCTP server running
>>> LKSCTP.
>>>
>>> The linux router did not change the source address of the client, so
>>> when it arrived to the SCTP server, the source address is the oriingal
>>> one.
>>>
>>> however, I found that there is no response from the SCTP server, any
>>> idea on this?
>>>
>>> if I connect the client directly to the SCTP server, it do not have any issue.
>>>
>>> help pls
>>>
>>> rbk
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>
>>
>> Start with a tcpdump on the client and the server and attempt a connection,
>> check to see if the INIT and INIT-ACK chunks are arriving appropriately.
>>
>> Neil
>>