Re: [PATCH V2 2/5] phy: phy-exynos-pcie: Add support for Exynos PCIe phy
From: Alim Akhtar
Date: Mon Jan 09 2017 - 08:38:13 EST
Hi,
On 01/04/2017 06:04 PM, Jaehoon Chung wrote:
This patch supports to use Generic Phy framework for Exynos PCIe phy.
When Exynos that supported the pcie want to use the PCIe,
it needs to control the phy resgister.
But it should be more complex to control in their own PCIe device drivers.
Currently, there is an exynos5440 case to support the pcie.
So this driver is based on Exynos5440 PCIe.
In future, will support the Other exynos SoCs likes exynos5433, exynos7.
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
---
Changelog on V2:
- Not include the codes relevant to pci-exynos.
- Remove the getting child node.
drivers/phy/Kconfig | 9 ++
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos-pcie.c | 280 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 290 insertions(+)
create mode 100644 drivers/phy/phy-exynos-pcie.c
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index e8eb7f2..2dddef4 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -331,6 +331,15 @@ config PHY_EXYNOS5_USBDRD
This driver provides PHY interface for USB 3.0 DRD controller
present on Exynos5 SoC series.
+config PHY_EXYNOS_PCIE
+ bool "Exynos PCIe PHY driver"
+ depends on ARCH_EXYNOS && OF
Please add a depends on COMPILE_TEST as well.
Apart from this looks ok.
+ depends on PCI_EXYNOS
+ select GENERIC_PHY
+ help
+ Enable PCIe PHY support for Exynos SoC series.
+ This driver provides PHY interface for Exynos PCIe controller.
+
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 65eb2f4..081aeb4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -37,6 +37,7 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/phy-exynos-pcie.c
new file mode 100644
index 0000000..b57f49b
--- /dev/null
+++ b/drivers/phy/phy-exynos-pcie.c
@@ -0,0 +1,280 @@
+/*
+ * Samsung EXYNOS SoC series PCIe PHY driver
+ *
+ * Phy provider for PCIe controller on Exynos SoC series
+ *
+ * Copyright (C) 2016 Samsung Electronics Co., Ltd.
+ * Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+/* PCIe Purple registers */
+#define PCIE_PHY_GLOBAL_RESET 0x000
+#define PCIE_PHY_COMMON_RESET 0x004
+#define PCIE_PHY_CMN_REG 0x008
+#define PCIE_PHY_MAC_RESET 0x00c
+#define PCIE_PHY_PLL_LOCKED 0x010
+#define PCIE_PHY_TRSVREG_RESET 0x020
+#define PCIE_PHY_TRSV_RESET 0x024
+
+/* PCIe PHY registers */
+#define PCIE_PHY_IMPEDANCE 0x004
+#define PCIE_PHY_PLL_DIV_0 0x008
+#define PCIE_PHY_PLL_BIAS 0x00c
+#define PCIE_PHY_DCC_FEEDBACK 0x014
+#define PCIE_PHY_PLL_DIV_1 0x05c
+#define PCIE_PHY_COMMON_POWER 0x064
+#define PCIE_PHY_COMMON_PD_CMN BIT(3)
+#define PCIE_PHY_TRSV0_EMP_LVL 0x084
+#define PCIE_PHY_TRSV0_DRV_LVL 0x088
+#define PCIE_PHY_TRSV0_RXCDR 0x0ac
+#define PCIE_PHY_TRSV0_POWER 0x0c4
+#define PCIE_PHY_TRSV0_PD_TSV BIT(7)
+#define PCIE_PHY_TRSV0_LVCC 0x0dc
+#define PCIE_PHY_TRSV1_EMP_LVL 0x144
+#define PCIE_PHY_TRSV1_RXCDR 0x16c
+#define PCIE_PHY_TRSV1_POWER 0x184
+#define PCIE_PHY_TRSV1_PD_TSV BIT(7)
+#define PCIE_PHY_TRSV1_LVCC 0x19c
+#define PCIE_PHY_TRSV2_EMP_LVL 0x204
+#define PCIE_PHY_TRSV2_RXCDR 0x22c
+#define PCIE_PHY_TRSV2_POWER 0x244
+#define PCIE_PHY_TRSV2_PD_TSV BIT(7)
+#define PCIE_PHY_TRSV2_LVCC 0x25c
+#define PCIE_PHY_TRSV3_EMP_LVL 0x2c4
+#define PCIE_PHY_TRSV3_RXCDR 0x2ec
+#define PCIE_PHY_TRSV3_POWER 0x304
+#define PCIE_PHY_TRSV3_PD_TSV BIT(7)
+#define PCIE_PHY_TRSV3_LVCC 0x31c
+
+struct exynos_pcie_phy_data {
+ struct phy_ops *ops;
+};
+
+/* For Exynos pcie phy */
+struct exynos_pcie_phy {
+ const struct exynos_pcie_phy_data *drv_data;
+ void __iomem *phy_base;
+ void __iomem *blk_base; /* For exynos5440 */
+};
+
+static void exynos_pcie_phy_writel(void __iomem *base, u32 val, u32 offset)
+{
+ writel(val, base + offset);
+}
+
+static u32 exynos_pcie_phy_readl(void __iomem *base, u32 offset)
+{
+ return readl(base + offset);
+}
+
+/* For Exynos5440 specific functions */
+static int exynos5440_pcie_phy_init(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+ /* DCC feedback control off */
+ exynos_pcie_phy_writel(ep->phy_base, 0x29, PCIE_PHY_DCC_FEEDBACK);
+
+ /* set TX/RX impedance */
+ exynos_pcie_phy_writel(ep->phy_base, 0xd5, PCIE_PHY_IMPEDANCE);
+
+ /* set 50Mhz PHY clock */
+ exynos_pcie_phy_writel(ep->phy_base, 0x14, PCIE_PHY_PLL_DIV_0);
+ exynos_pcie_phy_writel(ep->phy_base, 0x12, PCIE_PHY_PLL_DIV_1);
+
+ /* set TX Differential output for lane 0 */
+ exynos_pcie_phy_writel(ep->phy_base, 0x7f, PCIE_PHY_TRSV0_DRV_LVL);
+
+ /* set TX Pre-emphasis Level Control for lane 0 to minimum */
+ exynos_pcie_phy_writel(ep->phy_base, 0x0, PCIE_PHY_TRSV0_EMP_LVL);
+
+ /* set RX clock and data recovery bandwidth */
+ exynos_pcie_phy_writel(ep->phy_base, 0xe7, PCIE_PHY_PLL_BIAS);
+ exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV0_RXCDR);
+ exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV1_RXCDR);
+ exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV2_RXCDR);
+ exynos_pcie_phy_writel(ep->phy_base, 0x82, PCIE_PHY_TRSV3_RXCDR);
+
+ /* change TX Pre-emphasis Level Control for lanes */
+ exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV0_EMP_LVL);
+ exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV1_EMP_LVL);
+ exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV2_EMP_LVL);
+ exynos_pcie_phy_writel(ep->phy_base, 0x39, PCIE_PHY_TRSV3_EMP_LVL);
+
+ /* set LVCC */
+ exynos_pcie_phy_writel(ep->phy_base, 0x20, PCIE_PHY_TRSV0_LVCC);
+ exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV1_LVCC);
+ exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV2_LVCC);
+ exynos_pcie_phy_writel(ep->phy_base, 0xa0, PCIE_PHY_TRSV3_LVCC);
+
+ /* pulse for common reset */
+ exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_COMMON_RESET);
+ udelay(500);
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
+
+ return 0;
+}
+
+static int exynos5440_pcie_phy_power_on(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+ u32 val;
+
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_COMMON_RESET);
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_CMN_REG);
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSVREG_RESET);
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_TRSV_RESET);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
+ val &= ~PCIE_PHY_COMMON_PD_CMN;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
+ val &= ~PCIE_PHY_TRSV0_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
+ val &= ~PCIE_PHY_TRSV1_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
+ val &= ~PCIE_PHY_TRSV2_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
+ val &= ~PCIE_PHY_TRSV3_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
+
+ return 0;
+}
+
+static int exynos5440_pcie_phy_power_off(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+ u32 val;
+
+ while (exynos_pcie_phy_readl(ep->phy_base,
+ PCIE_PHY_PLL_LOCKED) == 0) {
+ val = exynos_pcie_phy_readl(ep->blk_base,
+ PCIE_PHY_PLL_LOCKED);
+ dev_info(&phy->dev, "PLL Locked: 0x%x\n", val);
+ }
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_COMMON_POWER);
+ val |= PCIE_PHY_COMMON_PD_CMN;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_COMMON_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV0_POWER);
+ val |= PCIE_PHY_TRSV0_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV0_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV1_POWER);
+ val |= PCIE_PHY_TRSV1_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV1_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV2_POWER);
+ val |= PCIE_PHY_TRSV2_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV2_POWER);
+
+ val = exynos_pcie_phy_readl(ep->phy_base, PCIE_PHY_TRSV3_POWER);
+ val |= PCIE_PHY_TRSV3_PD_TSV;
+ exynos_pcie_phy_writel(ep->phy_base, val, PCIE_PHY_TRSV3_POWER);
+
+ return 0;
+}
+
+static int exynos5440_pcie_phy_reset(struct phy *phy)
+{
+ struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_MAC_RESET);
+ exynos_pcie_phy_writel(ep->blk_base, 1, PCIE_PHY_GLOBAL_RESET);
+ exynos_pcie_phy_writel(ep->blk_base, 0, PCIE_PHY_GLOBAL_RESET);
+
+ return 0;
+}
+
+static struct phy_ops exynos5440_phy_ops = {
+ .init = exynos5440_pcie_phy_init,
+ .power_on = exynos5440_pcie_phy_power_on,
+ .power_off = exynos5440_pcie_phy_power_off,
+ .reset = exynos5440_pcie_phy_reset,
+};
+
+static const struct exynos_pcie_phy_data exynos5440_pcie_phy_data = {
+ .ops = &exynos5440_phy_ops,
+};
+
+static const struct of_device_id exynos_pcie_phy_match[] = {
+ {
+ .compatible = "samsung,exynos5440-pcie-phy",
+ .data = &exynos5440_pcie_phy_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_pcie_phy_match);
+
+static int exynos_pcie_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct exynos_pcie_phy *exynos_phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ const struct exynos_pcie_phy_data *drv_data;
+
+ drv_data = of_device_get_match_data(dev);
+ if (!drv_data)
+ return -ENODEV;
+
+ exynos_phy = devm_kzalloc(dev, sizeof(*exynos_phy), GFP_KERNEL);
+ if (!exynos_phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ exynos_phy->phy_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(exynos_phy->phy_base))
+ return PTR_ERR(exynos_phy->phy_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ exynos_phy->blk_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(exynos_phy->phy_base))
+ return PTR_ERR(exynos_phy->phy_base);
+
+ exynos_phy->drv_data = drv_data;
+
+ generic_phy = devm_phy_create(dev, dev->of_node, drv_data->ops);
+ if (IS_ERR(generic_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, exynos_phy);
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver exynos_pcie_phy_driver = {
+ .probe = exynos_pcie_phy_probe,
+ .driver = {
+ .of_match_table = exynos_pcie_phy_match,
+ .name = "exynos_pcie_phy",
+ }
+};
+module_platform_driver(exynos_pcie_phy_driver);