[PATCH linux v1 2/2] drivers: hwmon: hwmon driver for ASPEED AST2400/2500 PWM and Fan tach controller
From: Jaghathiswari Rankappagounder Natarajan
Date: Mon Jan 09 2017 - 17:00:06 EST
The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports.
The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer inputs.
PWM clock types M, N and 0 are three types just to have three independent PWM
sources.
The device driver matches on the device tree node. The configuration values
are read from the device tree and written to the respective registers.
The driver provides a sysfs entries through which the user can
configure the duty-cycle value (ranging from 0 to 100 percent) and read the
fan tach rpm value.
Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@xxxxxxxxxx>
---
Documentation/hwmon/aspeed-pwm-tacho | 22 +
drivers/hwmon/Kconfig | 9 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/aspeed-pwm-tacho.c | 884 +++++++++++++++++++++++++++++++++++
4 files changed, 916 insertions(+)
create mode 100644 Documentation/hwmon/aspeed-pwm-tacho
create mode 100644 drivers/hwmon/aspeed-pwm-tacho.c
diff --git a/Documentation/hwmon/aspeed-pwm-tacho b/Documentation/hwmon/aspeed-pwm-tacho
new file mode 100644
index 000000000000..0e9ec6d5f900
--- /dev/null
+++ b/Documentation/hwmon/aspeed-pwm-tacho
@@ -0,0 +1,22 @@
+Kernel driver aspeed-pwm-tacho
+==============================
+
+Supported chips:
+ ASPEED AST2400/2500
+
+Authors:
+ <jaghu@xxxxxxxxxx>
+
+Description:
+------------
+This driver implements support for ASPEED AST2400/2500 PWM and Fan Tacho
+controller. The PWM controller supports upto 8 PWM outputs. The Fan tacho
+controller supports upto 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+fanX_input ro provide current fan rotation value in RPM as reported
+ by the fan to the device.
+
+pwmX rw get or set PWM fan control value. This is an integer
+ value between 0(off) and 255(full speed).
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 45cef3d2c75c..757b5b0705bf 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -341,6 +341,15 @@ config SENSORS_ASB100
This driver can also be built as a module. If so, the module
will be called asb100.
+config SENSORS_ASPEED
+ tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver"
+ help
+ This driver provides support for ASPEED AST2400/AST2500 PWM
+ and Fan Tacho controllers.
+
+ This driver can also be built as a module. If so, the module
+ will be called aspeed_pwm_tacho.
+
config SENSORS_ATXP1
tristate "Attansic ATXP1 VID controller"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index aecf4ba17460..83025cc9bb45 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
+obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o
obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o
obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o
obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o
diff --git a/drivers/hwmon/aspeed-pwm-tacho.c b/drivers/hwmon/aspeed-pwm-tacho.c
new file mode 100644
index 000000000000..93eb3be2e506
--- /dev/null
+++ b/drivers/hwmon/aspeed-pwm-tacho.c
@@ -0,0 +1,884 @@
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 or later as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/delay.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sysfs.h>
+
+/* ASPEED PWM & FAN Tach Register Definition */
+#define ASPEED_PTCR_CTRL 0x00
+#define ASPEED_PTCR_CLK_CTRL 0x04
+#define ASPEED_PTCR_DUTY0_CTRL 0x08
+#define ASPEED_PTCR_DUTY1_CTRL 0x0c
+#define ASPEED_PTCR_TYPEM_CTRL 0x10
+#define ASPEED_PTCR_TYPEM_CTRL1 0x14
+#define ASPEED_PTCR_TYPEN_CTRL 0x18
+#define ASPEED_PTCR_TYPEN_CTRL1 0x1c
+#define ASPEED_PTCR_TACH_SOURCE 0x20
+#define ASPEED_PTCR_TRIGGER 0x28
+#define ASPEED_PTCR_RESULT 0x2c
+#define ASPEED_PTCR_INTR_CTRL 0x30
+#define ASPEED_PTCR_INTR_STS 0x34
+#define ASPEED_PTCR_TYPEM_LIMIT 0x38
+#define ASPEED_PTCR_TYPEN_LIMIT 0x3C
+#define ASPEED_PTCR_CTRL_EXT 0x40
+#define ASPEED_PTCR_CLK_CTRL_EXT 0x44
+#define ASPEED_PTCR_DUTY2_CTRL 0x48
+#define ASPEED_PTCR_DUTY3_CTRL 0x4c
+#define ASPEED_PTCR_TYPEO_CTRL 0x50
+#define ASPEED_PTCR_TYPEO_CTRL1 0x54
+#define ASPEED_PTCR_TACH_SOURCE_EXT 0x60
+#define ASPEED_PTCR_TYPEO_LIMIT 0x78
+
+/* ASPEED_PTCR_CTRL : 0x00 - General Control Register */
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1 15
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2 6
+#define ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK (BIT(7) | BIT(15))
+
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1 14
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2 5
+#define ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK (BIT(6) | BIT(14))
+
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1 13
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2 4
+#define ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK (BIT(5) | BIT(13))
+
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1 12
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2 3
+#define ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK (BIT(4) | BIT(12))
+
+#define ASPEED_PTCR_CTRL_FAN_NUM_EN(x) (0x1 << (16 + (x)))
+
+#define ASPEED_PTCR_CTRL_PWMD_EN (0x1 << 11)
+#define ASPEED_PTCR_CTRL_PWMC_EN (0x1 << 10)
+#define ASPEED_PTCR_CTRL_PWMB_EN (0x1 << 9)
+#define ASPEED_PTCR_CTRL_PWMA_EN (0x1 << 8)
+
+#define ASPEED_PTCR_CTRL_CLK_SRC 0x2
+#define ASPEED_PTCR_CTRL_CLK_EN 0x1
+
+/* ASPEED_PTCR_CLK_CTRL : 0x04 - Clock Control Register */
+/* TYPE N */
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT 24
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_H 20
+#define ASPEED_PTCR_CLK_CTRL_TYPEN_L 16
+/* TYPE M */
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT 8
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_H 4
+#define ASPEED_PTCR_CLK_CTRL_TYPEM_L 0
+
+/*
+ * ASPEED_PTCR_DUTY_CTRL/1/2/3 : 0x08/0x0C/0x48/0x4C - PWM-FAN duty control
+ * 0/1/2/3 register
+ */
+#define DUTY_CTRL_PWM2_FALL_POINT 24
+#define DUTY_CTRL_PWM2_RISE_POINT 16
+#define DUTY_CTRL_PWM1_FALL_POINT 8
+#define DUTY_CTRL_PWM1_RISE_POINT 0
+
+/* ASPEED_PTCR_TYPEM_CTRL : 0x10/0x18/0x50 - Type M/N/O Ctrl 0 Register */
+#define TYPE_CTRL_FAN_PERIOD 16
+#define TYPE_CTRL_FAN_MODE 4
+#define TYPE_CTRL_FAN_DIVISION 1
+#define TYPE_CTRL_FAN_TYPE_EN 1
+
+/* ASPEED_PTCR_TACH_SOURCE : 0x20/0x60 - Tach Source Register */
+/* bit [0,1] at 0x20, bit [2] at 0x60 */
+#define TACH_PWM_SOURCE_BIT01(x) ((x) * 2)
+#define TACH_PWM_SOURCE_BIT2(x) ((x) * 2)
+#define TACH_PWM_SOURCE_MASK_BIT01(x) (0x3 << ((x) * 2))
+#define TACH_PWM_SOURCE_MASK_BIT2(x) (0x1 << ((x) * 2))
+
+/* ASPEED_PTCR_TRIGGER : 0x28 - Trigger Register */
+#define TRIGGER_READ_FAN_NUM(x) (0x1 << (x))
+
+/* ASPEED_PTCR_RESULT : 0x2c - Result Register */
+#define RESULT_STATUS 31
+#define RESULT_VALUE_MASK 0xfffff
+
+/* ASPEED_PTCR_CTRL_EXT : 0x40 - General Control Extension #1 Register */
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1 15
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2 6
+#define ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK (BIT(7) | BIT(15))
+
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1 14
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2 5
+#define ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK (BIT(6) | BIT(14))
+
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1 13
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2 4
+#define ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK (BIT(5) | BIT(13))
+
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1 12
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2 3
+#define ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK (BIT(4) | BIT(12))
+
+#define ASPEED_PTCR_CTRL_PWMH_EN (0x1 << 11)
+#define ASPEED_PTCR_CTRL_PWMG_EN (0x1 << 10)
+#define ASPEED_PTCR_CTRL_PWMF_EN (0x1 << 9)
+#define ASPEED_PTCR_CTRL_PWME_EN (0x1 << 8)
+
+/* ASPEED_PTCR_CLK_EXT_CTRL : 0x44 - Clock Control Extension #1 Register */
+/* TYPE O */
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT 8
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_H 4
+#define ASPEED_PTCR_CLK_CTRL_TYPEO_L 0
+
+#define MCLK 1
+#define PWM_MAX 255
+#define MAX_HIGH_LOW_BIT 15
+
+struct aspeed_pwm_tacho_data {
+ void __iomem *base;
+ unsigned long clk_freq;
+ const struct attribute_group *groups[24];
+ u8 type_pwm_clock_unit[3];
+ u8 type_pwm_clock_division_h[3];
+ u8 type_pwm_clock_division_l[3];
+ u8 type_fan_tach_clock_division[3];
+ u16 type_fan_tach_unit[3];
+ u8 pwm_port_type[8];
+ u8 pwm_port_fan_ctrl[8];
+ u8 fan_tach_ch_source[16];
+};
+
+enum type { TYPEM, TYPEN, TYPEO };
+
+struct type_params {
+ u32 l_value;
+ u32 h_value;
+ u32 unit_value;
+ u32 clk_ctrl_reg;
+ u32 ctrl_reg;
+ u32 ctrl_reg1;
+};
+
+static const struct type_params type_params[] = {
+ [TYPEM] = {
+ .l_value = ASPEED_PTCR_CLK_CTRL_TYPEM_L,
+ .h_value = ASPEED_PTCR_CLK_CTRL_TYPEM_H,
+ .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEM_UNIT,
+ .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
+ .ctrl_reg = ASPEED_PTCR_TYPEM_CTRL,
+ .ctrl_reg1 = ASPEED_PTCR_TYPEM_CTRL1,
+ },
+ [TYPEN] = {
+ .l_value = ASPEED_PTCR_CLK_CTRL_TYPEN_L,
+ .h_value = ASPEED_PTCR_CLK_CTRL_TYPEN_H,
+ .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEN_UNIT,
+ .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL,
+ .ctrl_reg = ASPEED_PTCR_TYPEN_CTRL,
+ .ctrl_reg1 = ASPEED_PTCR_TYPEN_CTRL1,
+ },
+ [TYPEO] = {
+ .l_value = ASPEED_PTCR_CLK_CTRL_TYPEO_L,
+ .h_value = ASPEED_PTCR_CLK_CTRL_TYPEO_H,
+ .unit_value = ASPEED_PTCR_CLK_CTRL_TYPEO_UNIT,
+ .clk_ctrl_reg = ASPEED_PTCR_CLK_CTRL_EXT,
+ .ctrl_reg = ASPEED_PTCR_TYPEO_CTRL,
+ .ctrl_reg1 = ASPEED_PTCR_TYPEO_CTRL1,
+ }
+};
+
+enum pwm_port { PWMA, PWMB, PWMC, PWMD, PWME, PWMF, PWMG, PWMH };
+
+struct pwm_port_params {
+ u32 pwm_en;
+ u32 ctrl_reg;
+ u32 type_part1;
+ u32 type_part2;
+ u32 type_mask;
+ u32 duty_ctrl_rise_point;
+ u32 duty_ctrl_fall_point;
+ u32 duty_ctrl_reg;
+ u8 duty_ctrl_calc_type;
+};
+
+static const struct pwm_port_params pwm_port_params[] = {
+ [PWMA] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMA_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMA_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
+ .duty_ctrl_calc_type = 0,
+ },
+ [PWMB] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMB_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMB_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY0_CTRL,
+ .duty_ctrl_calc_type = 1,
+ },
+ [PWMC] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMC_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMC_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
+ .duty_ctrl_calc_type = 0,
+ },
+ [PWMD] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMD_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMD_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY1_CTRL,
+ .duty_ctrl_calc_type = 1,
+ },
+ [PWME] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWME_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWME_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWME_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
+ .duty_ctrl_calc_type = 0,
+ },
+ [PWMF] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMF_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMF_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY2_CTRL,
+ .duty_ctrl_calc_type = 1,
+ },
+ [PWMG] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMG_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMG_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM1_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM1_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
+ .duty_ctrl_calc_type = 0,
+ },
+ [PWMH] = {
+ .pwm_en = ASPEED_PTCR_CTRL_PWMH_EN,
+ .ctrl_reg = ASPEED_PTCR_CTRL_EXT,
+ .type_part1 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART1,
+ .type_part2 = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_PART2,
+ .type_mask = ASPEED_PTCR_CTRL_SET_PWMH_TYPE_MASK,
+ .duty_ctrl_rise_point = DUTY_CTRL_PWM2_RISE_POINT,
+ .duty_ctrl_fall_point = DUTY_CTRL_PWM2_FALL_POINT,
+ .duty_ctrl_reg = ASPEED_PTCR_DUTY3_CTRL,
+ .duty_ctrl_calc_type = 1,
+ }
+};
+
+static void aspeed_set_clock_enable(void __iomem *base, bool val)
+{
+ u32 reg_value = ioread32(base + ASPEED_PTCR_CTRL);
+
+ if (val)
+ reg_value |= ASPEED_PTCR_CTRL_CLK_EN;
+ else
+ reg_value &= ~ASPEED_PTCR_CTRL_CLK_EN;
+
+ iowrite32(reg_value, base + ASPEED_PTCR_CTRL);
+}
+
+static void aspeed_set_clock_source(void __iomem *base, int val)
+{
+ u32 reg_value = ioread32(base + ASPEED_PTCR_CTRL);
+
+ if (val == MCLK)
+ reg_value |= ASPEED_PTCR_CTRL_CLK_SRC;
+ else
+ reg_value &= ~ASPEED_PTCR_CTRL_CLK_SRC;
+
+ iowrite32(reg_value, base + ASPEED_PTCR_CTRL);
+}
+
+static void aspeed_set_pwm_clock_values(void __iomem *base, u8 type,
+ u8 div_high, u8 div_low, u8 unit)
+{
+ u32 reg_offset = type_params[type].clk_ctrl_reg;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ reg_value &= ~((0xF << type_params[type].h_value) |
+ (0xF << type_params[type].l_value) |
+ (0xFF << type_params[type].unit_value));
+ reg_value |= ((div_high << type_params[type].h_value) |
+ (div_low << type_params[type].l_value) |
+ (unit << type_params[type].unit_value));
+
+ iowrite32(reg_value, base + reg_offset);
+}
+
+static void aspeed_set_pwm_port_enable(void __iomem *base, u8 pwm_port,
+ bool enable)
+{
+ u32 reg_offset = pwm_port_params[pwm_port].ctrl_reg;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ if (enable)
+ reg_value |= pwm_port_params[pwm_port].pwm_en;
+ else
+ reg_value &= ~pwm_port_params[pwm_port].pwm_en;
+ iowrite32(reg_value, base + reg_offset);
+}
+
+static void aspeed_set_pwm_port_type(void __iomem *base, u8 pwm_port, u8 type)
+{
+ u32 reg_offset = pwm_port_params[pwm_port].ctrl_reg;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ reg_value &= ~pwm_port_params[pwm_port].type_mask;
+ reg_value |= (type & 0x1) <<
+ pwm_port_params[pwm_port].type_part1;
+ reg_value |= (type & 0x2) <<
+ pwm_port_params[pwm_port].type_part2;
+
+ iowrite32(reg_value, base + reg_offset);
+}
+
+static void aspeed_set_pwm_port_duty_rising_falling(void __iomem *base,
+ u8 pwm_port, u8 rising,
+ u8 falling)
+{
+ u32 reg_offset = pwm_port_params[pwm_port].duty_ctrl_reg;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ reg_value &= ~(0xFF << pwm_port_params[pwm_port].duty_ctrl_rise_point);
+ reg_value &= ~(0xFF << pwm_port_params[pwm_port].duty_ctrl_fall_point);
+
+ if (pwm_port_params[pwm_port].duty_ctrl_calc_type == 0) {
+ reg_value |= rising;
+ } else if (pwm_port_params[pwm_port].duty_ctrl_calc_type == 1) {
+ reg_value |= (rising <<
+ pwm_port_params[pwm_port].duty_ctrl_rise_point);
+ }
+ reg_value |= (falling <<
+ pwm_port_params[pwm_port].duty_ctrl_fall_point);
+
+ iowrite32(reg_value, base + reg_offset);
+}
+
+static void aspeed_set_tacho_type_enable(void __iomem *base, u8 type,
+ bool enable)
+{
+ u32 reg_offset = type_params[type].ctrl_reg;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ if (enable)
+ reg_value |= TYPE_CTRL_FAN_TYPE_EN;
+ else
+ reg_value &= ~TYPE_CTRL_FAN_TYPE_EN;
+
+ iowrite32(reg_value, base + reg_offset);
+}
+
+static void aspeed_set_tacho_type_values(void __iomem *base, u8 type, u8 mode,
+ u16 unit, u8 division)
+{
+ u32 reg_offset = type_params[type].ctrl_reg;
+ u32 reg_offset1 = type_params[type].ctrl_reg1;
+ u32 reg_value = ioread32(base + reg_offset);
+
+ reg_value &= ~((0x3 << TYPE_CTRL_FAN_MODE) |
+ (0xFFFF << TYPE_CTRL_FAN_PERIOD) |
+ (0x7 << TYPE_CTRL_FAN_DIVISION));
+ reg_value |= ((mode << TYPE_CTRL_FAN_MODE) |
+ (unit << TYPE_CTRL_FAN_PERIOD) |
+ (division << TYPE_CTRL_FAN_DIVISION));
+
+ iowrite32(reg_value, base + reg_offset);
+
+ iowrite32(unit << 16, base + reg_offset1);
+}
+
+static void aspeed_set_fan_tach_ch_enable(void __iomem *base, u8 fan_tach_ch,
+ bool enable)
+{
+ u32 reg_value = ioread32(base + ASPEED_PTCR_CTRL);
+
+ if (enable)
+ reg_value |= ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch);
+ else
+ reg_value &= ~ASPEED_PTCR_CTRL_FAN_NUM_EN(fan_tach_ch);
+
+ iowrite32(reg_value, base + ASPEED_PTCR_CTRL);
+}
+
+static void aspeed_set_fan_tach_ch_source(void __iomem *base, u8 fan_tach_ch,
+ u8 fan_tach_ch_source)
+{
+ u32 reg_value1 = ioread32(base + ASPEED_PTCR_TACH_SOURCE);
+ u32 reg_value2 = ioread32(base + ASPEED_PTCR_TACH_SOURCE_EXT);
+
+ reg_value1 &= ~(TACH_PWM_SOURCE_MASK_BIT01(fan_tach_ch));
+ reg_value1 |= ((fan_tach_ch_source & 0x3) <<
+ (TACH_PWM_SOURCE_BIT01(fan_tach_ch)));
+
+ reg_value2 &= ~(TACH_PWM_SOURCE_MASK_BIT2(fan_tach_ch));
+ reg_value2 |= (((fan_tach_ch_source & 0x4) >> 2) <<
+ (TACH_PWM_SOURCE_BIT2(fan_tach_ch)));
+
+ iowrite32(reg_value1, base + ASPEED_PTCR_TACH_SOURCE);
+ iowrite32(reg_value2, base + ASPEED_PTCR_TACH_SOURCE_EXT);
+}
+
+static void aspeed_set_pwm_port_fan_ctrl(struct aspeed_pwm_tacho_data *priv,
+ u8 index, u8 fan_ctrl)
+{
+ u16 period;
+ u16 dc_time_on;
+
+ period = priv->type_pwm_clock_unit[priv->pwm_port_type[index]];
+ period += 1;
+ dc_time_on = (fan_ctrl * period) / PWM_MAX;
+
+ if (dc_time_on == 0) {
+ aspeed_set_pwm_port_enable(priv->base, index, false);
+ } else {
+ if (dc_time_on == period)
+ dc_time_on = 0;
+
+ aspeed_set_pwm_port_duty_rising_falling(priv->base, index, 0,
+ dc_time_on);
+ aspeed_set_pwm_port_enable(priv->base, index, true);
+ }
+}
+
+static u32 aspeed_get_fan_tach_ch_measure_period(struct aspeed_pwm_tacho_data
+ *priv, u8 type)
+{
+ u32 clk;
+ u16 tacho_unit;
+ u8 clk_unit, div_h, div_l, tacho_div;
+
+ clk = priv->clk_freq;
+
+ clk_unit = priv->type_pwm_clock_unit[type];
+ div_h = priv->type_pwm_clock_division_h[type];
+ div_h = 0x1 << div_h;
+ div_l = priv->type_pwm_clock_division_l[type];
+ if (div_l == 0)
+ div_l = 1;
+ else
+ div_l = div_l * 2;
+
+ tacho_unit = priv->type_fan_tach_unit[type];
+ tacho_div = priv->type_fan_tach_clock_division[type];
+
+ tacho_div = 0x4 << (tacho_div * 2);
+ return clk / (clk_unit * div_h * div_l * tacho_div * tacho_unit);
+}
+
+static u32 aspeed_get_fan_tach_ch_rpm(struct aspeed_pwm_tacho_data *priv,
+ u8 fan_tach_ch)
+{
+ u32 raw_data, rpm, tach_div, clk_source, timeout = 0, sec;
+ u8 fan_tach_ch_source, type;
+ void __iomem *base = priv->base;
+
+ iowrite32(0, priv->base + ASPEED_PTCR_TRIGGER);
+ iowrite32(0x1 << fan_tach_ch, priv->base + ASPEED_PTCR_TRIGGER);
+
+ fan_tach_ch_source = priv->fan_tach_ch_source[fan_tach_ch];
+ type = priv->pwm_port_type[fan_tach_ch_source];
+
+ sec = (1000 / aspeed_get_fan_tach_ch_measure_period(priv, type));
+
+ msleep(sec);
+
+ while (!(ioread32(priv->base + ASPEED_PTCR_RESULT) &
+ (0x1 << RESULT_STATUS))) {
+ timeout++;
+ if (timeout > 1)
+ return 0;
+ msleep(sec);
+ };
+
+ raw_data = (ioread32(base + ASPEED_PTCR_RESULT)) &
+ RESULT_VALUE_MASK;
+ tach_div = priv->type_fan_tach_clock_division[type];
+
+ tach_div = 0x4 << (tach_div * 2);
+ clk_source = priv->clk_freq;
+ rpm = (clk_source * 60) / (2 * raw_data * tach_div);
+ return rpm;
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int index = sensor_attr->index;
+ int ret;
+
+ struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+ long fan_ctrl;
+
+ ret = kstrtol(buf, 10, &fan_ctrl);
+ if (ret != 0)
+ return ret;
+
+ if (fan_ctrl < 0 || fan_ctrl > PWM_MAX)
+ return -EINVAL;
+
+ if (priv->pwm_port_fan_ctrl[index] == fan_ctrl)
+ return count;
+
+ priv->pwm_port_fan_ctrl[index] = fan_ctrl;
+ aspeed_set_pwm_port_fan_ctrl(priv, index, fan_ctrl);
+
+ return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int index = sensor_attr->index;
+
+ struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", priv->pwm_port_fan_ctrl[index]);
+}
+
+static ssize_t show_rpm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr);
+ int index = sensor_attr->index;
+ u32 rpm;
+
+ struct aspeed_pwm_tacho_data *priv = dev_get_drvdata(dev);
+
+ rpm = aspeed_get_fan_tach_ch_rpm(priv, index);
+
+ return sprintf(buf, "%u\n", rpm);
+}
+
+#define pwm_index(index) \
+static SENSOR_DEVICE_ATTR(pwm##index, 0644, \
+ show_pwm, set_pwm, index - 1); \
+ \
+static struct attribute *pwm##index##_dev_attrs[] = { \
+ &sensor_dev_attr_pwm##index.dev_attr.attr, \
+ NULL, \
+}; \
+static const struct attribute_group pwm##index##_dev_groups = { \
+ .attrs = pwm##index##_dev_attrs, \
+}
+
+#define fan_index(index) \
+static SENSOR_DEVICE_ATTR(fan##index##_input, 0444, \
+ show_rpm, NULL, index - 1); \
+ \
+static struct attribute *fan##index##_dev_attrs[] = { \
+ &sensor_dev_attr_fan##index##_input.dev_attr.attr, \
+ NULL, \
+}; \
+static const struct attribute_group fan##index##_dev_groups = { \
+ .attrs = fan##index##_dev_attrs, \
+}
+
+pwm_index(1);
+pwm_index(2);
+pwm_index(3);
+pwm_index(4);
+pwm_index(5);
+pwm_index(6);
+pwm_index(7);
+pwm_index(8);
+
+fan_index(1);
+fan_index(2);
+fan_index(3);
+fan_index(4);
+fan_index(5);
+fan_index(6);
+fan_index(7);
+fan_index(8);
+fan_index(9);
+fan_index(10);
+fan_index(11);
+fan_index(12);
+fan_index(13);
+fan_index(14);
+fan_index(15);
+fan_index(16);
+
+/*
+ * If the clock type is type M then :
+ * The PWM frequency = 24MHz / (type M clock division L bit *
+ * type M clock division H bit * (type M PWM period bit + 1))
+ * Calculate type M clock division L bit and H bits given the other values
+ */
+static int aspeed_create_type(struct device_node *child,
+ struct aspeed_pwm_tacho_data *priv,
+ u8 index)
+{
+ u8 period, div_l, div_h;
+ bool enable;
+ u8 mode, div;
+ u16 unit;
+
+ of_property_read_u8(child, "pwm_period", &period);
+ of_property_read_u8(child, "pwm_clock_division_h", &div_h);
+ of_property_read_u8(child, "pwm_clock_division_l", &div_l);
+ priv->type_pwm_clock_division_h[index] = div_h;
+ priv->type_pwm_clock_division_l[index] = div_l;
+ priv->type_pwm_clock_unit[index] = period;
+ aspeed_set_pwm_clock_values(priv->base, index, div_h, div_l, period);
+
+ enable = of_property_read_bool(child, "fan_tach_enable");
+ aspeed_set_tacho_type_enable(priv->base, index, enable);
+
+ of_property_read_u8(child, "fan_tach_clock_division", &div);
+ priv->type_fan_tach_clock_division[index] = div;
+
+ of_property_read_u8(child, "fan_tach_mode_selection", &mode);
+
+ of_property_read_u16(child, "fan_tach_period", &unit);
+ priv->type_fan_tach_unit[index] = unit;
+ aspeed_set_tacho_type_values(priv->base, index, mode, unit, div);
+
+ return 0;
+}
+
+static int aspeed_create_pwm_port(struct device_node *child,
+ struct aspeed_pwm_tacho_data *priv, u8 index,
+ u8 group_index)
+{
+ u8 val;
+ bool enable;
+
+ switch (index) {
+ case 1:
+ priv->groups[group_index] = &pwm1_dev_groups;
+ break;
+ case 2:
+ priv->groups[group_index] = &pwm2_dev_groups;
+ break;
+ case 3:
+ priv->groups[group_index] = &pwm3_dev_groups;
+ break;
+ case 4:
+ priv->groups[group_index] = &pwm4_dev_groups;
+ break;
+ case 5:
+ priv->groups[group_index] = &pwm5_dev_groups;
+ break;
+ case 6:
+ priv->groups[group_index] = &pwm6_dev_groups;
+ break;
+ case 7:
+ priv->groups[group_index] = &pwm7_dev_groups;
+ break;
+ case 8:
+ priv->groups[group_index] = &pwm8_dev_groups;
+ break;
+ }
+
+ enable = of_property_read_bool(child, "enable");
+ aspeed_set_pwm_port_enable(priv->base, index - 1, enable);
+
+ of_property_read_u8(child, "type", &val);
+ priv->pwm_port_type[index - 1] = val;
+ aspeed_set_pwm_port_type(priv->base, index - 1, val);
+
+ of_property_read_u8(child, "fan_ctrl", &val);
+ priv->pwm_port_fan_ctrl[index - 1] = val;
+ aspeed_set_pwm_port_fan_ctrl(priv, index - 1, val);
+
+ return 0;
+}
+
+static int aspeed_create_fan_tach_channel(struct device *dev,
+ struct device_node *child,
+ struct aspeed_pwm_tacho_data *priv,
+ u8 index, u8 group_index)
+{
+ u8 val;
+ bool enable;
+ struct gpio_desc *fan_ctrl = devm_gpiod_get(dev, "fan-ctrl", GPIOD_IN);
+
+ if (IS_ERR(fan_ctrl))
+ return PTR_ERR(fan_ctrl);
+
+ switch (index) {
+ case 1:
+ priv->groups[group_index] = &fan1_dev_groups;
+ break;
+ case 2:
+ priv->groups[group_index] = &fan2_dev_groups;
+ break;
+ case 3:
+ priv->groups[group_index] = &fan3_dev_groups;
+ break;
+ case 4:
+ priv->groups[group_index] = &fan4_dev_groups;
+ break;
+ case 5:
+ priv->groups[group_index] = &fan5_dev_groups;
+ break;
+ case 6:
+ priv->groups[group_index] = &fan6_dev_groups;
+ break;
+ case 7:
+ priv->groups[group_index] = &fan7_dev_groups;
+ break;
+ case 8:
+ priv->groups[group_index] = &fan8_dev_groups;
+ break;
+ case 9:
+ priv->groups[group_index] = &fan9_dev_groups;
+ break;
+ case 10:
+ priv->groups[group_index] = &fan10_dev_groups;
+ break;
+ case 11:
+ priv->groups[group_index] = &fan11_dev_groups;
+ break;
+ case 12:
+ priv->groups[group_index] = &fan12_dev_groups;
+ break;
+ case 13:
+ priv->groups[group_index] = &fan13_dev_groups;
+ break;
+ case 14:
+ priv->groups[group_index] = &fan14_dev_groups;
+ break;
+ case 15:
+ priv->groups[group_index] = &fan15_dev_groups;
+ break;
+ case 16:
+ priv->groups[group_index] = &fan16_dev_groups;
+ break;
+ }
+
+ enable = of_property_read_bool(child, "enable");
+ aspeed_set_fan_tach_ch_enable(priv->base, index - 1, enable);
+
+ of_property_read_u8(child, "pwm_source", &val);
+ priv->fan_tach_ch_source[index - 1] = val;
+ aspeed_set_fan_tach_ch_source(priv->base, index - 1, val);
+
+ return 0;
+}
+
+static int aspeed_pwm_tacho_probe(struct platform_device *pdev)
+{
+ struct device_node *np, *type_np, *pwm_np, *fan_tach_np, *child;
+ u8 pwm_index = 1, fan_index = 1, type_index = 0, group_index = 0;
+ struct aspeed_pwm_tacho_data *priv;
+ struct resource *res;
+ struct device *hwmon;
+ void __iomem *base;
+ struct clk *clk;
+
+ np = pdev->dev.of_node;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!base)
+ return -ENOMEM;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->base = base;
+
+ iowrite32(0, base + ASPEED_PTCR_TACH_SOURCE);
+ iowrite32(0, base + ASPEED_PTCR_TACH_SOURCE_EXT);
+
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk))
+ return -ENODEV;
+
+ priv->clk_freq = clk_get_rate(clk);
+ aspeed_set_clock_enable(base, true);
+ aspeed_set_clock_source(base, 0);
+
+ type_np = of_get_child_by_name(np, "type_values");
+ for_each_child_of_node(type_np, child) {
+ aspeed_create_type(child, priv, type_index++);
+ of_node_put(child);
+ }
+ of_node_put(type_np);
+ pwm_np = of_get_child_by_name(np, "pwm_port");
+ for_each_child_of_node(pwm_np, child) {
+ aspeed_create_pwm_port(child, priv, pwm_index++,
+ group_index++);
+ of_node_put(child);
+ }
+ of_node_put(pwm_np);
+ fan_tach_np = of_get_child_by_name(np, "fan_tach_channel");
+ for_each_child_of_node(fan_tach_np, child) {
+ aspeed_create_fan_tach_channel(&pdev->dev, child, priv,
+ fan_index++, group_index++);
+ of_node_put(child);
+ }
+ of_node_put(fan_tach_np);
+ of_node_put(np);
+
+ hwmon = devm_hwmon_device_register_with_groups(&pdev->dev,
+ "aspeed_pwm_tacho",
+ priv, priv->groups);
+ if (IS_ERR(hwmon))
+ return PTR_ERR(hwmon);
+
+ return 0;
+}
+
+static const struct of_device_id of_pwm_tacho_match_table[] = {
+ { .compatible = "aspeed,aspeed2400-pwm-tacho", },
+ { .compatible = "aspeed,aspeed2500-pwm-tacho", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_tacho_match_table);
+
+static struct platform_driver aspeed_pwm_tacho_driver = {
+ .probe = aspeed_pwm_tacho_probe,
+ .driver = {
+ .name = "aspeed_pwm_tacho",
+ .owner = THIS_MODULE,
+ .of_match_table = of_pwm_tacho_match_table,
+ },
+};
+
+module_platform_driver(aspeed_pwm_tacho_driver);
+
+MODULE_AUTHOR("Jaghathiswari Rankappagounder Natarajan <jaghu@xxxxxxxxxx>");
+MODULE_DESCRIPTION("ASPEED PWM and Fan Tacho device driver");
+MODULE_LICENSE("GPL");
--
2.11.0.390.gc69c2f50cf-goog