[PATCH v5 06/12] mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
From: Gregory CLEMENT
Date: Wed Jan 11 2017 - 12:23:04 EST
From: Hu Ziji <huziji@xxxxxxxxxxx>
Add Xenon eMMC/SD/SDIO host controller core functionality.
Add Xenon specific intialization process.
Add Xenon specific mmc_host_ops APIs.
Add Xenon specific register definitions.
Add CONFIG_MMC_SDHCI_XENON support in drivers/mmc/host/Kconfig.
Marvell Xenon SDHC conforms to SD Physical Layer Specification
Version 3.01 and is designed according to the guidelines provided
in the SD Host Controller Standard Specification Version 3.00.
Signed-off-by: Hu Ziji <huziji@xxxxxxxxxxx>
Tested-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/Kconfig | 9 +-
drivers/mmc/host/Makefile | 3 +-
drivers/mmc/host/sdhci-xenon.c | 631 ++++++++++++++++++++++++++++++++++-
drivers/mmc/host/sdhci-xenon.h | 70 ++++-
4 files changed, 713 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-xenon.c
create mode 100644 drivers/mmc/host/sdhci-xenon.h
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 2eb97014dc3f..8d2d08de14a0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -819,3 +819,12 @@ config MMC_SDHCI_BRCMSTB
Broadcom STB SoCs.
If unsure, say Y.
+
+config MMC_SDHCI_XENON
+ tristate "Marvell Xenon eMMC/SD/SDIO SDHCI driver"
+ depends on MMC_SDHCI && MMC_SDHCI_PLTFM
+ help
+ This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
+ If you have a machine with integrated Marvell Xenon SDHC IP,
+ say Y or M here.
+ If unsure, say N.
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index ccc9c4cba154..b0a2ab4b256e 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -82,3 +82,6 @@ obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
endif
+
+obj-$(CONFIG_MMC_SDHCI_XENON) += sdhci-xenon-driver.o
+sdhci-xenon-driver-y += sdhci-xenon.o
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
new file mode 100644
index 000000000000..0e0c60892f72
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -0,0 +1,631 @@
+/*
+ * Driver for Marvell Xenon SDHC as a platform device
+ *
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author: Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date: 2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * Inspired by Jisheng Zhang <jszhang@xxxxxxxxxxx>
+ * Special thanks to Video BG4 project team.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#include "sdhci-pltfm.h"
+#include "sdhci-xenon.h"
+
+static int enable_xenon_internal_clk(struct sdhci_host *host)
+{
+ u32 reg;
+ u8 timeout;
+
+ reg = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
+ reg |= SDHCI_CLOCK_INT_EN;
+ sdhci_writel(host, reg, SDHCI_CLOCK_CONTROL);
+ /* Wait max 20 ms */
+ timeout = 20;
+ while (!((reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+ & SDHCI_CLOCK_INT_STABLE)) {
+ if (timeout == 0) {
+ pr_err("%s: Internal clock never stabilised.\n",
+ mmc_hostname(host->mmc));
+ return -ETIMEDOUT;
+ }
+ timeout--;
+ mdelay(1);
+ }
+
+ return 0;
+}
+
+/* Set SDCLK-off-while-idle */
+static void xenon_set_sdclk_off_idle(struct sdhci_host *host,
+ unsigned char sdhc_id, bool enable)
+{
+ u32 reg;
+ u32 mask;
+
+ reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
+ /* Get the bit shift basing on the SDHC index */
+ mask = (0x1 << (XENON_SDCLK_IDLEOFF_ENABLE_SHIFT + sdhc_id));
+ if (enable)
+ reg |= mask;
+ else
+ reg &= ~mask;
+
+ sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
+}
+
+/* Enable/Disable the Auto Clock Gating function */
+static void xenon_set_acg(struct sdhci_host *host, bool enable)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
+ if (enable)
+ reg &= ~XENON_AUTO_CLKGATE_DISABLE_MASK;
+ else
+ reg |= XENON_AUTO_CLKGATE_DISABLE_MASK;
+ sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
+}
+
+/* Enable this SDHC */
+static void xenon_enable_sdhc(struct sdhci_host *host,
+ unsigned char sdhc_id)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
+ reg |= (BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
+ sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
+
+ /*
+ * Manually set the flag which all the card types require,
+ * including SD, eMMC, SDIO
+ */
+ host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+}
+
+/* Disable this SDHC */
+static void xenon_disable_sdhc(struct sdhci_host *host,
+ unsigned char sdhc_id)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, XENON_SYS_OP_CTRL);
+ reg &= ~(BIT(sdhc_id) << XENON_SLOT_ENABLE_SHIFT);
+ sdhci_writel(host, reg, XENON_SYS_OP_CTRL);
+}
+
+/* Enable Parallel Transfer Mode */
+static void xenon_enable_sdhc_parallel_tran(struct sdhci_host *host,
+ unsigned char sdhc_id)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
+ reg |= BIT(sdhc_id);
+ sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
+}
+
+/* Mask command conflict error */
+static void xenon_mask_cmd_conflict_err(struct sdhci_host *host)
+{
+ u32 reg;
+
+ reg = sdhci_readl(host, XENON_SYS_EXT_OP_CTRL);
+ reg |= XENON_MASK_CMD_CONFLICT_ERR;
+ sdhci_writel(host, reg, XENON_SYS_EXT_OP_CTRL);
+}
+
+static void xenon_sdhc_retune_setup(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u32 reg;
+
+ /* Disable the Re-Tuning Request functionality */
+ reg = sdhci_readl(host, XENON_SLOT_RETUNING_REQ_CTRL);
+ reg &= ~XENON_RETUNING_COMPATIBLE;
+ sdhci_writel(host, reg, XENON_SLOT_RETUNING_REQ_CTRL);
+
+ /* Disable the Re-tuning Interrupt */
+ reg = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
+ reg &= ~SDHCI_INT_RETUNE;
+ sdhci_writel(host, reg, SDHCI_SIGNAL_ENABLE);
+ reg = sdhci_readl(host, SDHCI_INT_ENABLE);
+ reg &= ~SDHCI_INT_RETUNE;
+ sdhci_writel(host, reg, SDHCI_INT_ENABLE);
+
+ /* Force to use Tuning Mode 1 */
+ host->tuning_mode = SDHCI_TUNING_MODE_1;
+ /* Set re-tuning period */
+ host->tuning_count = 1 << (priv->tuning_count - 1);
+}
+
+/*
+ * Operations inside struct sdhci_ops
+ */
+/* Recover the Register Setting cleared during SOFTWARE_RESET_ALL */
+static void sdhci_xenon_reset_exit(struct sdhci_host *host,
+ unsigned char sdhc_id, u8 mask)
+{
+ /* Only SOFTWARE RESET ALL will clear the register setting */
+ if (!(mask & SDHCI_RESET_ALL))
+ return;
+
+ /* Disable tuning request and auto-retuning again */
+ xenon_sdhc_retune_setup(host);
+
+ xenon_set_acg(host, true);
+
+ xenon_set_sdclk_off_idle(host, sdhc_id, false);
+}
+
+static void sdhci_xenon_reset(struct sdhci_host *host, u8 mask)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ sdhci_reset(host, mask);
+ sdhci_xenon_reset_exit(host, priv->sdhc_id, mask);
+}
+
+/*
+ * Xenon defines different values for HS200 and HS400
+ * in Host_Control_2
+ */
+static void xenon_set_uhs_signaling(struct sdhci_host *host,
+ unsigned int timing)
+{
+ u16 ctrl_2;
+
+ ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ /* Select Bus Speed Mode for host */
+ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
+ if (timing == MMC_TIMING_MMC_HS200)
+ ctrl_2 |= XENON_CTRL_HS200;
+ else if (timing == MMC_TIMING_UHS_SDR104)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR104;
+ else if (timing == MMC_TIMING_UHS_SDR12)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
+ else if (timing == MMC_TIMING_UHS_SDR25)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
+ else if (timing == MMC_TIMING_UHS_SDR50)
+ ctrl_2 |= SDHCI_CTRL_UHS_SDR50;
+ else if ((timing == MMC_TIMING_UHS_DDR50) ||
+ (timing == MMC_TIMING_MMC_DDR52))
+ ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= XENON_CTRL_HS400;
+ sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
+}
+
+static const struct sdhci_ops sdhci_xenon_ops = {
+ .set_clock = sdhci_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .reset = sdhci_xenon_reset,
+ .set_uhs_signaling = xenon_set_uhs_signaling,
+ .get_max_clock = sdhci_pltfm_clk_get_max_clock,
+};
+
+static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
+ .ops = &sdhci_xenon_ops,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+ SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER |
+ SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+};
+
+/*
+ * Xenon Specific Operations in mmc_host_ops
+ */
+static void xenon_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ unsigned long flags;
+ u32 reg;
+
+ /*
+ * HS400/HS200/eMMC HS doesn't have Preset Value register.
+ * However, sdhci_set_ios will read HS400/HS200 Preset register.
+ * Disable Preset Value register for HS400/HS200.
+ * eMMC HS with preset_enabled set will trigger a bug in
+ * get_preset_value().
+ */
+ spin_lock_irqsave(&host->lock, flags);
+ if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+ (ios->timing == MMC_TIMING_MMC_HS200) ||
+ (ios->timing == MMC_TIMING_MMC_HS)) {
+ host->preset_enabled = false;
+ host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+
+ reg = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+ reg &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+ sdhci_writew(host, reg, SDHCI_HOST_CONTROL2);
+ } else {
+ host->quirks2 &= ~SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
+ }
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ sdhci_set_ios(mmc, ios);
+
+ if (host->clock > XENON_DEFAULT_SDCLK_FREQ) {
+ spin_lock_irqsave(&host->lock, flags);
+ xenon_set_sdclk_off_idle(host, priv->sdhc_id, true);
+ spin_unlock_irqrestore(&host->lock, flags);
+ }
+}
+
+static int xenon_emmc_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ unsigned char voltage = ios->signal_voltage;
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned char voltage_code;
+ u32 ctrl;
+
+ if ((voltage == MMC_SIGNAL_VOLTAGE_330) ||
+ (voltage == MMC_SIGNAL_VOLTAGE_180)) {
+ if (voltage == MMC_SIGNAL_VOLTAGE_330)
+ voltage_code = XENON_EMMC_VCCQ_3_3V;
+ else if (voltage == MMC_SIGNAL_VOLTAGE_180)
+ voltage_code = XENON_EMMC_VCCQ_1_8V;
+
+ /*
+ * This host is for eMMC, XENON self-defined
+ * eMMC control register should be accessed
+ * instead of Host Control 2
+ */
+ ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+ ctrl &= ~XENON_EMMC_VCCQ_MASK;
+ ctrl |= voltage_code;
+ sdhci_writel(host, ctrl, XENON_SLOT_EMMC_CTRL);
+
+ /* There is no standard to determine this waiting period */
+ usleep_range(1000, 2000);
+
+ /* Check whether io voltage switch is done */
+ ctrl = sdhci_readl(host, XENON_SLOT_EMMC_CTRL);
+ ctrl &= XENON_EMMC_VCCQ_MASK;
+ /*
+ * This bit is set only when regulator feeds back
+ * the voltage switch results to Xenon SDHC.
+ * However, in actaul implementation, regulator might not
+ * provide this feedback.
+ * Thus we shall not rely on this bit to determine
+ * if switch failed.
+ * If the bit is not set, just throw a message.
+ * Besides, error code should not be returned.
+ */
+ if (ctrl != voltage_code)
+ dev_info(mmc_dev(mmc), "fail to detect eMMC signal voltage stable\n");
+ return 0;
+ }
+
+ dev_err(mmc_dev(mmc), "Unsupported signal voltage: %d\n", voltage);
+ return -EINVAL;
+}
+
+static int xenon_start_signal_voltage_switch(struct mmc_host *mmc,
+ struct mmc_ios *ios)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ /*
+ * Before SD/SDIO set signal voltage, SD bus clock should be
+ * disabled. However, sdhci_set_clock will also disable the Internal
+ * clock in mmc_set_signal_voltage().
+ * If Internal clock is disabled, the 3.3V/1.8V bit can not be updated.
+ * Thus here manually enable internal clock.
+ *
+ * After switch completes, it is unnecessary to disable internal clock,
+ * since keeping internal clock active obeys SD spec.
+ */
+ enable_xenon_internal_clk(host);
+
+ if (priv->init_card_type == MMC_TYPE_MMC)
+ return xenon_emmc_signal_voltage_switch(mmc, ios);
+
+ return sdhci_start_signal_voltage_switch(mmc, ios);
+}
+
+/*
+ * Update card type.
+ * priv->init_card_type will be used in PHY timing adjustment.
+ */
+static void xenon_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+
+ /* Update card type*/
+ priv->init_card_type = card->type;
+}
+
+static int xenon_execute_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+
+ if (host->timing == MMC_TIMING_UHS_DDR50)
+ return 0;
+
+ /*
+ * Currently force Xenon driver back to support mode 1 only,
+ * even though Xenon might claim to support mode 2 or mode 3.
+ * It requires more time to test mode 2/mode 3 on more platforms.
+ */
+ if (host->tuning_mode != SDHCI_TUNING_MODE_1)
+ xenon_sdhc_retune_setup(host);
+
+ return sdhci_execute_tuning(mmc, opcode);
+}
+
+static void xenon_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct sdhci_host *host = mmc_priv(mmc);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u32 reg;
+ u8 sdhc_id = priv->sdhc_id;
+
+ sdhci_enable_sdio_irq(mmc, enable);
+
+ if (enable) {
+ /*
+ * Set SDIO Card Inserted indication
+ * to enable detecting SDIO async irq.
+ */
+ reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
+ reg |= (1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
+ sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
+ } else {
+ /* Clear SDIO Card Inserted indication */
+ reg = sdhci_readl(host, XENON_SYS_CFG_INFO);
+ reg &= ~(1 << (sdhc_id + XENON_SLOT_TYPE_SDIO_SHIFT));
+ sdhci_writel(host, reg, XENON_SYS_CFG_INFO);
+ }
+}
+
+static void xenon_replace_mmc_host_ops(struct sdhci_host *host)
+{
+ host->mmc_host_ops.set_ios = xenon_set_ios;
+ host->mmc_host_ops.start_signal_voltage_switch =
+ xenon_start_signal_voltage_switch;
+ host->mmc_host_ops.init_card = xenon_init_card;
+ host->mmc_host_ops.execute_tuning = xenon_execute_tuning;
+ host->mmc_host_ops.enable_sdio_irq = xenon_enable_sdio_irq;
+}
+
+/*
+ * Parse child node in Xenon DT.
+ * Search for the following item(s):
+ * - eMMC card type
+ */
+static int xenon_child_node_of_parse(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct mmc_host *mmc = host->mmc;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ struct device_node *child;
+ int nr_child;
+
+ priv->init_card_type = XENON_CARD_TYPE_UNKNOWN;
+
+ nr_child = of_get_child_count(np);
+ if (!nr_child)
+ return 0;
+
+ for_each_child_of_node(np, child) {
+ if (of_device_is_compatible(child, "mmc-card")) {
+ priv->init_card_type = MMC_TYPE_MMC;
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
+
+ /*
+ * Force to clear BUS_TEST to
+ * skip bus_test_pre and bus_test_post
+ */
+ mmc->caps &= ~MMC_CAP_BUS_WIDTH_TEST;
+ mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ |
+ MMC_CAP2_PACKED_CMD |
+ MMC_CAP2_NO_SD |
+ MMC_CAP2_NO_SDIO;
+ }
+ }
+
+ return 0;
+}
+
+static int xenon_probe_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct mmc_host *mmc = host->mmc;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ int err;
+ u32 sdhc_id, nr_sdhc;
+ u32 tuning_count;
+
+ /* Standard MMC property */
+ err = mmc_of_parse(mmc);
+ if (err)
+ return err;
+
+ /* Standard SDHCI property */
+ sdhci_get_of_property(pdev);
+
+ /*
+ * Xenon Specific property:
+ * init_card_type: check whether this SDHC is for eMMC
+ * sdhc-id: the index of current SDHC.
+ * Refer to XENON_SYS_CFG_INFO register
+ * tun-count: the interval between re-tuning
+ */
+ /* Parse child node, including checking emmc type */
+ err = xenon_child_node_of_parse(pdev);
+ if (err)
+ return err;
+
+ priv->sdhc_id = 0x0;
+ if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
+ nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
+ nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
+ if (unlikely(sdhc_id > nr_sdhc)) {
+ dev_err(mmc_dev(mmc), "SDHC Index %d exceeds Number of SDHCs %d\n",
+ sdhc_id, nr_sdhc);
+ return -EINVAL;
+ }
+ }
+
+ tuning_count = XENON_DEF_TUNING_COUNT;
+ if (!of_property_read_u32(np, "marvell,xenon-tun-count",
+ &tuning_count)) {
+ if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
+ dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set default value %d\n",
+ XENON_DEF_TUNING_COUNT);
+ tuning_count = XENON_DEF_TUNING_COUNT;
+ }
+ }
+ priv->tuning_count = tuning_count;
+
+ return err;
+}
+
+static int xenon_sdhc_probe(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u8 sdhc_id = priv->sdhc_id;
+
+ /* Enable SDHC */
+ xenon_enable_sdhc(host, sdhc_id);
+
+ /* Enable ACG */
+ xenon_set_acg(host, true);
+
+ /* Enable Parallel Transfer Mode */
+ xenon_enable_sdhc_parallel_tran(host, sdhc_id);
+
+ xenon_mask_cmd_conflict_err(host);
+
+ return 0;
+}
+
+static void xenon_sdhc_remove(struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ u8 sdhc_id = priv->sdhc_id;
+
+ /* disable SDHC */
+ xenon_disable_sdhc(host, sdhc_id);
+}
+
+static int sdhci_xenon_probe(struct platform_device *pdev)
+{
+ struct sdhci_pltfm_host *pltfm_host;
+ struct sdhci_host *host;
+ struct sdhci_xenon_priv *priv;
+ int err;
+
+ host = sdhci_pltfm_init(pdev, &sdhci_xenon_pdata,
+ sizeof(struct sdhci_xenon_priv));
+ if (IS_ERR(host))
+ return PTR_ERR(host);
+
+ pltfm_host = sdhci_priv(host);
+ priv = sdhci_pltfm_priv(pltfm_host);
+
+ xenon_set_acg(host, false);
+
+ /*
+ * Link Xenon specific mmc_host_ops function,
+ * to replace standard ones in sdhci_ops.
+ */
+ xenon_replace_mmc_host_ops(host);
+
+ pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+ if (IS_ERR(pltfm_host->clk)) {
+ err = PTR_ERR(pltfm_host->clk);
+ dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
+ goto free_pltfm;
+ }
+ err = clk_prepare_enable(pltfm_host->clk);
+ if (err)
+ goto free_pltfm;
+
+ err = xenon_probe_dt(pdev);
+ if (err)
+ goto err_clk;
+
+ err = xenon_sdhc_probe(host);
+ if (err)
+ goto err_clk;
+
+ err = sdhci_add_host(host);
+ if (err)
+ goto remove_sdhc;
+
+ return 0;
+
+remove_sdhc:
+ xenon_sdhc_remove(host);
+err_clk:
+ clk_disable_unprepare(pltfm_host->clk);
+free_pltfm:
+ sdhci_pltfm_free(pdev);
+ return err;
+}
+
+static int sdhci_xenon_remove(struct platform_device *pdev)
+{
+ struct sdhci_host *host = platform_get_drvdata(pdev);
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+ xenon_sdhc_remove(host);
+
+ sdhci_remove_host(host, 0);
+
+ clk_disable_unprepare(pltfm_host->clk);
+
+ sdhci_pltfm_free(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id sdhci_xenon_dt_ids[] = {
+ { .compatible = "marvell,armada-8k-sdhci",},
+ { .compatible = "marvell,armada-3700-sdhci",},
+ {}
+};
+MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
+
+static struct platform_driver sdhci_xenon_driver = {
+ .driver = {
+ .name = "xenon-sdhci",
+ .of_match_table = sdhci_xenon_dt_ids,
+ .pm = &sdhci_pltfm_pmops,
+ },
+ .probe = sdhci_xenon_probe,
+ .remove = sdhci_xenon_remove,
+};
+
+module_platform_driver(sdhci_xenon_driver);
+
+MODULE_DESCRIPTION("SDHCI platform driver for Marvell Xenon SDHC");
+MODULE_AUTHOR("Hu Ziji <huziji@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
new file mode 100644
index 000000000000..69de711db9eb
--- /dev/null
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2016 Marvell, All Rights Reserved.
+ *
+ * Author: Hu Ziji <huziji@xxxxxxxxxxx>
+ * Date: 2016-8-24
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ */
+#ifndef SDHCI_XENON_H_
+#define SDHCI_XENON_H_
+
+/* Register Offset of Xenon SDHC self-defined register */
+#define XENON_SYS_CFG_INFO 0x0104
+#define XENON_SLOT_TYPE_SDIO_SHIFT 24
+#define XENON_NR_SUPPORTED_SLOT_MASK 0x7
+
+#define XENON_SYS_OP_CTRL 0x0108
+#define XENON_AUTO_CLKGATE_DISABLE_MASK BIT(20)
+#define XENON_SDCLK_IDLEOFF_ENABLE_SHIFT 8
+#define XENON_SLOT_ENABLE_SHIFT 0
+
+#define XENON_SYS_EXT_OP_CTRL 0x010C
+#define XENON_MASK_CMD_CONFLICT_ERR BIT(8)
+
+#define XENON_SLOT_EMMC_CTRL 0x0130
+#define XENON_EMMC_VCCQ_MASK 0x3
+#define XENON_EMMC_VCCQ_1_8V 0x1
+#define XENON_EMMC_VCCQ_3_3V 0x3
+
+#define XENON_SLOT_RETUNING_REQ_CTRL 0x0144
+/* retuning compatible */
+#define XENON_RETUNING_COMPATIBLE 0x1
+
+/* Tuning Parameter */
+#define XENON_TMR_RETUN_NO_PRESENT 0xF
+#define XENON_DEF_TUNING_COUNT 0x9
+
+#define XENON_DEFAULT_SDCLK_FREQ 400000
+
+/* Xenon specific Mode Select value */
+#define XENON_CTRL_HS200 0x5
+#define XENON_CTRL_HS400 0x6
+
+/* Indicate Card Type is not clear yet */
+#define XENON_CARD_TYPE_UNKNOWN 0xF
+
+struct sdhci_xenon_priv {
+ unsigned char tuning_count;
+ /* idx of SDHC */
+ u8 sdhc_id;
+
+ /*
+ * eMMC/SD/SDIO require different PHY settings or
+ * voltage control. It's necessary for Xenon driver to
+ * recognize card type during, or even before initialization.
+ * However, mmc_host->card is not available yet at that time.
+ * This field records the card type during init.
+ * For eMMC, it is updated in dt parse. For SD/SDIO, it is
+ * updated in xenon_init_card().
+ *
+ * It is only valid during initialization after it is updated.
+ * Do not access this variable in normal transfers after
+ * initialization completes.
+ */
+ unsigned int init_card_type;
+};
+
+#endif
--
git-series 0.9.1