Re: [PATCH] PCI: Enumerate switches below PCI-to-PCIe bridges

[wangyijing]

Reviewed-by: Yijing Wang <wangyijing@xxxxxxxxxx>

å 2017/1/11 23:44, Bjorn Helgaas åé:
> PCI: Enumerate switches below PCI-to-PCIe bridges
> 
> A PCI-to-PCIe bridge (a "reverse bridge") has a PCI or PCI-X primary
> interface and a PCI Express secondary interface.  The PCIe interface is a
> Downstream Port that originates a Link.  See the "PCI Express to PCI/PCI-X
> Bridge Specification", rev 1.0, sections 1.2 and A.6.
> 
> The bug report below involves a PCI-to-PCIe bridge and a PCIe switch below
> the bridge:
> 
>   00:1e.0 Intel 82801 PCI Bridge to [bus 01-0a]
>   01:00.0 Pericom PI7C9X111SL PCIe-to-PCI Reversible Bridge to [bus 02-0a]
>   02:00.0 Pericom Device 8608 [PCIe Upstream Port] to [bus 03-0a]
>   03:01.0 Pericom Device 8608 [PCIe Downstream Port] to [bus 0a]
> 
> 01:00.0 is configured as a PCI-to-PCIe bridge (despite the name printed by
> lspci).  As we traverse a PCIe hierarchy, device connections alternate
> between PCIe Links and internal Switch logic.  Previously we did not
> recognize that 01:00.0 had a secondary link, so we thought the 02:00.0
> Upstream Port *did* have a secondary link.  In fact, it's the other way
> around: 01:00.0 has a secondary link, and 02:00.0 has internal Switch logic
> on its secondary side.
> 
> When we thought 02:00.0 had a secondary link, the pci_scan_slot() ->
> only_one_child() path assumed 02:00.0 could have only one child, so 03:00.0
> was the only possible downstream device.  But 03:00.0 doesn't exist, so we
> didn't look for any other devices on bus 03.
> 
> Booting with "pci=pcie_scan_all" is a workaround, but we don't want users
> to have to do that.
> 
> Recognize that PCI-to-PCIe bridges originate links on their secondary
> interfaces.
> 
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=189361
> Fixes: d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links")
> Tested-by: Blake Moore <blake.moore@xxxxxx>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> CC: stable@xxxxxxxxxxxxxxx      # v4.2+
> 
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index e164b5c9f0f0..204960e70333 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1169,6 +1169,7 @@ void set_pcie_port_type(struct pci_dev *pdev)
>  	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
>  	if (!pos)
>  		return;
> +
>  	pdev->pcie_cap = pos;
>  	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
>  	pdev->pcie_flags_reg = reg16;
> @@ -1176,13 +1177,14 @@ void set_pcie_port_type(struct pci_dev *pdev)
>  	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
>  
>  	/*
> -	 * A Root Port is always the upstream end of a Link.  No PCIe
> -	 * component has two Links.  Two Links are connected by a Switch
> -	 * that has a Port on each Link and internal logic to connect the
> -	 * two Ports.
> +	 * A Root Port or a PCI-to-PCIe bridge is always the upstream end
> +	 * of a Link.  No PCIe component has two Links.  Two Links are
> +	 * connected by a Switch that has a Port on each Link and internal
> +	 * logic to connect the two Ports.
>  	 */
>  	type = pci_pcie_type(pdev);
> -	if (type == PCI_EXP_TYPE_ROOT_PORT)
> +	if (type == PCI_EXP_TYPE_ROOT_PORT ||
> +	    type == PCI_EXP_TYPE_PCIE_BRIDGE)
>  		pdev->has_secondary_link = 1;
>  	else if (type == PCI_EXP_TYPE_UPSTREAM ||
>  		 type == PCI_EXP_TYPE_DOWNSTREAM) {
> 
> .
>