Re: [PATCH v3 10/24] ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture

From: Steve Longerbeam
Date: Thu Jan 12 2017 - 18:40:56 EST




On 01/12/2017 11:37 AM, Tim Harvey wrote:
On Fri, Jan 6, 2017 at 6:11 PM, Steve Longerbeam <slongerbeam@xxxxxxxxx> wrote:
Add pinctrl groups for both GPT input capture channels.

Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 967c3b8..495709f 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -457,6 +457,18 @@
>;
};

+ pinctrl_gpt_input_capture0: gptinputcapture0grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpt_input_capture1: gptinputcapture1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2 0x1b0b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
--
Steve,

These are not used anywhere.

Yes, maybe I should just remove this patch for now. I'm only keeping it
because eventually it will be needed to support i.MX6 input capture.

Steve