Re: [PATCH v2 2/2] mmc: pwrseq: add support for Marvell SD8787 chip

From: Matt Ranostay
Date: Fri Jan 13 2017 - 00:24:22 EST


On Thu, Jan 12, 2017 at 9:22 PM, Matt Ranostay <matt@xxxxxxxxxxxxxxxxxxx> wrote:
> Allow power sequencing for the Marvell SD8787 Wifi/BT chip.
> This can be abstracted to other chipsets if needed in the future.


Er crap seems how the main patch file got dropped out. Resubmitting in
a minute... sorry!

>
> Cc: Tony Lindgren <tony@xxxxxxxxxxx>
> Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Signed-off-by: Matt Ranostay <matt@xxxxxxxxxxxxxxxxxxx>
> ---
> drivers/mmc/core/Kconfig | 10 ++++++++++
> drivers/mmc/core/Makefile | 1 +
> 2 files changed, 11 insertions(+)
>
> diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
> index cdfa8520a4b1..fc1ecdaaa9ca 100644
> --- a/drivers/mmc/core/Kconfig
> +++ b/drivers/mmc/core/Kconfig
> @@ -12,6 +12,16 @@ config PWRSEQ_EMMC
> This driver can also be built as a module. If so, the module
> will be called pwrseq_emmc.
>
> +config PWRSEQ_SD8787
> + tristate "HW reset support for SD8787 BT + Wifi module"
> + depends on OF && (MWIFIEX || BT_MRVL_SDIO)
> + help
> + This selects hardware reset support for the SD8787 BT + Wifi
> + module. By default this option is set to n.
> +
> + This driver can also be built as a module. If so, the module
> + will be called pwrseq_sd8787.
> +
> config PWRSEQ_SIMPLE
> tristate "Simple HW reset support for MMC"
> default y
> diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
> index b2a257dc644f..0f81464fa824 100644
> --- a/drivers/mmc/core/Makefile
> +++ b/drivers/mmc/core/Makefile
> @@ -10,6 +10,7 @@ mmc_core-y := core.o bus.o host.o \
> quirks.o slot-gpio.o
> mmc_core-$(CONFIG_OF) += pwrseq.o
> obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o
> +obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o
> obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o
> mmc_core-$(CONFIG_DEBUG_FS) += debugfs.o
> obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
> --
> 2.10.2
>