Re: [PATCH 00/10] ARM: da850-lcdk: add SATA support

[Sekhar Nori]

On Friday 13 January 2017 06:07 PM, Bartosz Golaszewski wrote:
> This series contains all the changes necessary to make SATA work on
> the da850-lcdk board.
> 
> The first patch adds a clock lookup entry required for the ahci core
> to retrieve a functional clock.
> 
> The second enables relevant config options for all davinci boards.
> 
> The third adds device tree bindings for the ahci_da850 driver.
> 
> The fourth adds a workaround for a SATA controller instability we
> detected after increasing the PLL0 frequency for proper LCD
> controller support.
> 
> Patches 5 through 7 extend the ahci_da850 driver - add DT support,
> un-hardcode the clock multiplier value and add a workaround for
> a quirk present on the da850 SATA controller.
> 
> Patches 8-10 add the device tree changes required to probe the driver.
> 
> I'm posting the series as a whole to give all reviewers the full
> picture and visibility of the changes required, if needed I can resend
> the patches separately.

I just tested this series on my LCDK board using a Western Digital SATA
HDD and it works great with some basic read / write tests. Thanks!

For the non-platform patches which I wont be queuing:

Tested-by: Sekhar Nori <nsekhar@xxxxxx>

I will take a look at the series closely next week.

Thanks,
Sekhar