Re: [PATCH 1/3] arm: dts: mt2701: Sort DT nodes by register address

From: Matthias Brugger
Date: Fri Jan 13 2017 - 09:39:01 EST




On 28/12/16 06:46, James Liao wrote:
This patch rearrange MT2701 DT nodes to keep them in ascending order.

Signed-off-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>
---
arch/arm/boot/dts/mt2701.dtsi | 36 ++++++++++++++++++------------------
1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 7eab6f4..73f4b7c 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -96,24 +96,6 @@
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};

- pio: pinctrl@10005000 {
- compatible = "mediatek,mt2701-pinctrl";
- reg = <0 0x1000b000 0 0x1000>;
- mediatek,pctl-regmap = <&syscfg_pctl_a>;
- pins-are-numbered;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- };

Applied the whole series. I fixed the unit address of pio to 1000b000 and it's order in the file.

Please check v4.10-next/dts32

Thanks,
Mathias

-
- syscfg_pctl_a: syscfg@10005000 {
- compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
- reg = <0 0x10005000 0 0x1000>;
- };
-
topckgen: syscon@10000000 {
compatible = "mediatek,mt2701-topckgen", "syscon";
reg = <0 0x10000000 0 0x1000>;
@@ -134,6 +116,24 @@
#reset-cells = <1>;
};

+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt2701-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl_a>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ syscfg_pctl_a: syscfg@10005000 {
+ compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt2701-wdt",
"mediatek,mt6589-wdt";