Re: [PATCH v2 3/6] arm: dts: mt2701: Add nand device node

[Matthias Brugger]

On 13/01/17 09:42, Erin Lo wrote:
> From: Xiaolei Li <xiaolei.li@xxxxxxxxxxxx>
>
> Add mt2701 nand device node, include nfi and bch ecc.
>
> Signed-off-by: Xiaolei Li <xiaolei.li@xxxxxxxxxxxx>
> Signed-off-by: Erin Lo <erin.lo@xxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/mt2701.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)

Applied to v4.10-next/dts32

> diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
> index 87be52c..1182c43 100644
> --- a/arch/arm/boot/dts/mt2701.dtsi
> +++ b/arch/arm/boot/dts/mt2701.dtsi
> @@ -261,6 +261,28 @@
>  		status = "disabled";
>  	};
>
> +	nandc: nfi@1100d000 {
> +		compatible = "mediatek,mt2701-nfc";
> +		reg = <0 0x1100d000 0 0x1000>;
> +		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_NFI>,
> +			 <&pericfg CLK_PERI_NFI_PAD>;
> +		clock-names = "nfi_clk", "pad_clk";
> +		status = "disabled";
> +		ecc-engine = <&bch>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +	};
> +
> +	bch: ecc@1100e000 {
> +		compatible = "mediatek,mt2701-ecc";
> +		reg = <0 0x1100e000 0 0x1000>;
> +		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&pericfg CLK_PERI_NFI_ECC>;
> +		clock-names = "nfiecc_clk";
> +		status = "disabled";
> +	};
> +
>  	spi1: spi@11016000 {
>  		compatible = "mediatek,mt2701-spi";
>  		#address-cells = <1>;