[PATCH v2 tip/core/rcu 1/3] srcu: Implement more-efficient reader counts
From: Paul E. McKenney
Date: Sun Jan 15 2017 - 17:43:01 EST
From: Lance Roy <ldr709@xxxxxxxxx>
SRCU uses two per-cpu counters: a nesting counter to count the number of
active critical sections, and a sequence counter to ensure that the nesting
counters don't change while they are being added together in
srcu_readers_active_idx_check().
This patch instead uses per-cpu lock and unlock counters. Because both
counters only increase and srcu_readers_active_idx_check() reads the unlock
counter before the lock counter, this achieves the same end without having
to increment two different counters in srcu_read_lock(). This also saves a
smp_mb() in srcu_readers_active_idx_check().
A possible problem with this patch is that it can only handle
ULONG_MAX - NR_CPUS simultaneous readers, whereas the old version could
handle up to ULONG_MAX.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
Signed-off-by: Lance Roy <ldr709@xxxxxxxxx>
Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
Cc: Lai Jiangshan <jiangshanlai@xxxxxxxxx>
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
---
include/linux/srcu.h | 10 ++--
kernel/rcu/rcutorture.c | 19 +++++++-
kernel/rcu/srcu.c | 123 ++++++++++++++++++------------------------------
3 files changed, 67 insertions(+), 85 deletions(-)
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index dc8eb63c6568..a598cf3ac70c 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -33,9 +33,9 @@
#include <linux/rcupdate.h>
#include <linux/workqueue.h>
-struct srcu_struct_array {
- unsigned long c[2];
- unsigned long seq[2];
+struct srcu_array {
+ unsigned long lock_count[2];
+ unsigned long unlock_count[2];
};
struct rcu_batch {
@@ -46,7 +46,7 @@ struct rcu_batch {
struct srcu_struct {
unsigned long completed;
- struct srcu_struct_array __percpu *per_cpu_ref;
+ struct srcu_array __percpu *per_cpu_ref;
spinlock_t queue_lock; /* protect ->batch_queue, ->running */
bool running;
/* callbacks just queued */
@@ -118,7 +118,7 @@ void process_srcu(struct work_struct *work);
* See include/linux/percpu-defs.h for the rules on per-CPU variables.
*/
#define __DEFINE_SRCU(name, is_static) \
- static DEFINE_PER_CPU(struct srcu_struct_array, name##_srcu_array);\
+ static DEFINE_PER_CPU(struct srcu_array, name##_srcu_array);\
is_static struct srcu_struct name = __SRCU_STRUCT_INIT(name)
#define DEFINE_SRCU(name) __DEFINE_SRCU(name, /* not static */)
#define DEFINE_STATIC_SRCU(name) __DEFINE_SRCU(name, static)
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 87c51225ceec..d81345be730e 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -564,10 +564,25 @@ static void srcu_torture_stats(void)
pr_alert("%s%s per-CPU(idx=%d):",
torture_type, TORTURE_FLAG, idx);
for_each_possible_cpu(cpu) {
+ unsigned long l0, l1;
+ unsigned long u0, u1;
long c0, c1;
+ struct srcu_array *counts = per_cpu_ptr(srcu_ctlp->per_cpu_ref, cpu);
- c0 = (long)per_cpu_ptr(srcu_ctlp->per_cpu_ref, cpu)->c[!idx];
- c1 = (long)per_cpu_ptr(srcu_ctlp->per_cpu_ref, cpu)->c[idx];
+ u0 = counts->unlock_count[!idx];
+ u1 = counts->unlock_count[idx];
+
+ /*
+ * Make sure that a lock is always counted if the corresponding
+ * unlock is counted.
+ */
+ smp_rmb();
+
+ l0 = counts->lock_count[!idx];
+ l1 = counts->lock_count[idx];
+
+ c0 = l0 - u0;
+ c1 = l1 - u1;
pr_cont(" %d(%ld,%ld)", cpu, c0, c1);
}
pr_cont("\n");
diff --git a/kernel/rcu/srcu.c b/kernel/rcu/srcu.c
index 9b9cdd549caa..ddabf5fbf562 100644
--- a/kernel/rcu/srcu.c
+++ b/kernel/rcu/srcu.c
@@ -106,7 +106,7 @@ static int init_srcu_struct_fields(struct srcu_struct *sp)
rcu_batch_init(&sp->batch_check1);
rcu_batch_init(&sp->batch_done);
INIT_DELAYED_WORK(&sp->work, process_srcu);
- sp->per_cpu_ref = alloc_percpu(struct srcu_struct_array);
+ sp->per_cpu_ref = alloc_percpu(struct srcu_array);
return sp->per_cpu_ref ? 0 : -ENOMEM;
}
@@ -141,114 +141,78 @@ EXPORT_SYMBOL_GPL(init_srcu_struct);
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
/*
- * Returns approximate total of the readers' ->seq[] values for the
+ * Returns approximate total of the readers' ->lock_count[] values for the
* rank of per-CPU counters specified by idx.
*/
-static unsigned long srcu_readers_seq_idx(struct srcu_struct *sp, int idx)
+static unsigned long srcu_readers_lock_idx(struct srcu_struct *sp, int idx)
{
int cpu;
unsigned long sum = 0;
- unsigned long t;
for_each_possible_cpu(cpu) {
- t = READ_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->seq[idx]);
- sum += t;
+ struct srcu_array *cpuc = per_cpu_ptr(sp->per_cpu_ref, cpu);
+
+ sum += READ_ONCE(cpuc->lock_count[idx]);
}
return sum;
}
/*
- * Returns approximate number of readers active on the specified rank
- * of the per-CPU ->c[] counters.
+ * Returns approximate total of the readers' ->unlock_count[] values for the
+ * rank of per-CPU counters specified by idx.
*/
-static unsigned long srcu_readers_active_idx(struct srcu_struct *sp, int idx)
+static unsigned long srcu_readers_unlock_idx(struct srcu_struct *sp, int idx)
{
int cpu;
unsigned long sum = 0;
- unsigned long t;
for_each_possible_cpu(cpu) {
- t = READ_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[idx]);
- sum += t;
+ struct srcu_array *cpuc = per_cpu_ptr(sp->per_cpu_ref, cpu);
+
+ sum += READ_ONCE(cpuc->unlock_count[idx]);
}
return sum;
}
/*
* Return true if the number of pre-existing readers is determined to
- * be stably zero. An example unstable zero can occur if the call
- * to srcu_readers_active_idx() misses an __srcu_read_lock() increment,
- * but due to task migration, sees the corresponding __srcu_read_unlock()
- * decrement. This can happen because srcu_readers_active_idx() takes
- * time to sum the array, and might in fact be interrupted or preempted
- * partway through the summation.
+ * be zero.
*/
static bool srcu_readers_active_idx_check(struct srcu_struct *sp, int idx)
{
- unsigned long seq;
+ unsigned long unlocks;
- seq = srcu_readers_seq_idx(sp, idx);
+ unlocks = srcu_readers_unlock_idx(sp, idx);
/*
- * The following smp_mb() A pairs with the smp_mb() B located in
- * __srcu_read_lock(). This pairing ensures that if an
- * __srcu_read_lock() increments its counter after the summation
- * in srcu_readers_active_idx(), then the corresponding SRCU read-side
- * critical section will see any changes made prior to the start
- * of the current SRCU grace period.
+ * Make sure that a lock is always counted if the corresponding unlock
+ * is counted. Needs to be a smp_mb() as the read side may contain a
+ * read from a variable that is written to before the synchronize_srcu()
+ * in the write side. In this case smp_mb()s A and B act like the store
+ * buffering pattern.
*
- * Also, if the above call to srcu_readers_seq_idx() saw the
- * increment of ->seq[], then the call to srcu_readers_active_idx()
- * must see the increment of ->c[].
+ * This smp_mb() also pairs with smp_mb() C to prevent writes after the
+ * synchronize_srcu() from being executed before the grace period ends.
*/
smp_mb(); /* A */
/*
- * Note that srcu_readers_active_idx() can incorrectly return
- * zero even though there is a pre-existing reader throughout.
- * To see this, suppose that task A is in a very long SRCU
- * read-side critical section that started on CPU 0, and that
- * no other reader exists, so that the sum of the counters
- * is equal to one. Then suppose that task B starts executing
- * srcu_readers_active_idx(), summing up to CPU 1, and then that
- * task C starts reading on CPU 0, so that its increment is not
- * summed, but finishes reading on CPU 2, so that its decrement
- * -is- summed. Then when task B completes its sum, it will
- * incorrectly get zero, despite the fact that task A has been
- * in its SRCU read-side critical section the whole time.
+ * If the locks are the same as the unlocks, then there must have
+ * been no readers on this index at some time in between. This does not
+ * mean that there are no more readers, as one could have read the
+ * current index but not have incremented the lock counter yet.
*
- * We therefore do a validation step should srcu_readers_active_idx()
- * return zero.
+ * Note that there can be at most NR_CPUS worth of readers using the old
+ * index that haven't incremented ->lock_count[] yet. Therefore, the
+ * sum of the ->lock_count[]s cannot increment enough times to overflow
+ * and end up equal the sum of the ->unlock_count[]s, as long as there
+ * are at most ULONG_MAX - NR_CPUS readers at a time. (Yes, this does
+ * mean that systems having more than a billion or so CPUs need to be
+ * 64-bit systems.) Therefore, the only way that the return values of
+ * the two calls to srcu_readers_(un)lock_idx() can be equal is if there
+ * are no active readers using this index.
*/
- if (srcu_readers_active_idx(sp, idx) != 0)
- return false;
-
- /*
- * The remainder of this function is the validation step.
- * The following smp_mb() D pairs with the smp_mb() C in
- * __srcu_read_unlock(). If the __srcu_read_unlock() was seen
- * by srcu_readers_active_idx() above, then any destructive
- * operation performed after the grace period will happen after
- * the corresponding SRCU read-side critical section.
- *
- * Note that there can be at most NR_CPUS worth of readers using
- * the old index, which is not enough to overflow even a 32-bit
- * integer. (Yes, this does mean that systems having more than
- * a billion or so CPUs need to be 64-bit systems.) Therefore,
- * the sum of the ->seq[] counters cannot possibly overflow.
- * Therefore, the only way that the return values of the two
- * calls to srcu_readers_seq_idx() can be equal is if there were
- * no increments of the corresponding rank of ->seq[] counts
- * in the interim. But the missed-increment scenario laid out
- * above includes an increment of the ->seq[] counter by
- * the corresponding __srcu_read_lock(). Therefore, if this
- * scenario occurs, the return values from the two calls to
- * srcu_readers_seq_idx() will differ, and thus the validation
- * step below suffices.
- */
- smp_mb(); /* D */
-
- return srcu_readers_seq_idx(sp, idx) == seq;
+ return srcu_readers_lock_idx(sp, idx) == unlocks;
}
/**
@@ -266,8 +230,12 @@ static bool srcu_readers_active(struct srcu_struct *sp)
unsigned long sum = 0;
for_each_possible_cpu(cpu) {
- sum += READ_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[0]);
- sum += READ_ONCE(per_cpu_ptr(sp->per_cpu_ref, cpu)->c[1]);
+ struct srcu_array *cpuc = per_cpu_ptr(sp->per_cpu_ref, cpu);
+
+ sum += READ_ONCE(cpuc->lock_count[0]);
+ sum += READ_ONCE(cpuc->lock_count[1]);
+ sum -= READ_ONCE(cpuc->unlock_count[0]);
+ sum -= READ_ONCE(cpuc->unlock_count[1]);
}
return sum;
}
@@ -298,9 +266,8 @@ int __srcu_read_lock(struct srcu_struct *sp)
int idx;
idx = READ_ONCE(sp->completed) & 0x1;
- __this_cpu_inc(sp->per_cpu_ref->c[idx]);
+ __this_cpu_inc(sp->per_cpu_ref->lock_count[idx]);
smp_mb(); /* B */ /* Avoid leaking the critical section. */
- __this_cpu_inc(sp->per_cpu_ref->seq[idx]);
return idx;
}
EXPORT_SYMBOL_GPL(__srcu_read_lock);
@@ -314,7 +281,7 @@ EXPORT_SYMBOL_GPL(__srcu_read_lock);
void __srcu_read_unlock(struct srcu_struct *sp, int idx)
{
smp_mb(); /* C */ /* Avoid leaking the critical section. */
- this_cpu_dec(sp->per_cpu_ref->c[idx]);
+ this_cpu_inc(sp->per_cpu_ref->unlock_count[idx]);
}
EXPORT_SYMBOL_GPL(__srcu_read_unlock);
@@ -349,7 +316,7 @@ static bool try_check_zero(struct srcu_struct *sp, int idx, int trycount)
/*
* Increment the ->completed counter so that future SRCU readers will
- * use the other rank of the ->c[] and ->seq[] arrays. This allows
+ * use the other rank of the ->(un)lock_count[] arrays. This allows
* us to wait for pre-existing readers in a starvation-free manner.
*/
static void srcu_flip(struct srcu_struct *sp)
--
2.5.2