Re: [PATCH V7 04/10] arm64: exception: handle Synchronous External Abort

[Baicar, Tyler]

Hello Will,


On 1/16/2017 4:53 AM, Will Deacon wrote:
> On Thu, Jan 12, 2017 at 11:15:18AM -0700, Tyler Baicar wrote:
> > SEA exceptions are often caused by an uncorrected hardware
> > error, and are handled when data abort and instruction abort
> > exception classes have specific values for their Fault Status
> > Code.
> > When SEA occurs, before killing the process, go through
> > the handlers registered in the notification list.
> > Update fault_info[] with specific SEA faults so that the
> > new SEA handler is used.
> >
> > Signed-off-by: Tyler Baicar <tbaicar@xxxxxxxxxxxxxx>
> > Signed-off-by: Jonathan (Zhixiong) Zhang <zjzhang@xxxxxxxxxxxxxx>
> > Signed-off-by: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
> > ---
> >   arch/arm64/include/asm/system_misc.h | 13 ++++++++
> >   arch/arm64/mm/fault.c                | 58 +++++++++++++++++++++++++++++-------
> >   2 files changed, 61 insertions(+), 10 deletions(-)
> >
> > diff --git a/arch/arm64/include/asm/system_misc.h b/arch/arm64/include/asm/system_misc.h
> > index 57f110b..e7f3440 100644
> > --- a/arch/arm64/include/asm/system_misc.h
> > +++ b/arch/arm64/include/asm/system_misc.h
> > @@ -64,4 +64,17 @@ extern void (*arm_pm_restart)(enum reboot_mode reboot_mode, const char *cmd);
> >   
> >   #endif	/* __ASSEMBLY__ */
> >   
> > +/*
> > + * The functions below are used to register and unregister callbacks
> > + * that are to be invoked when a Synchronous External Abort (SEA)
> > + * occurs. An SEA is raised by certain fault status codes that have
> > + * either data or instruction abort as the exception class, and
> > + * callbacks may be registered to parse or handle such hardware errors.
> > + *
> > + * Registered callbacks are run in an interrupt/atomic context. They
> > + * are not allowed to block or sleep.
> > + */
> > +int register_sea_notifier(struct notifier_block *nb);
> > +void unregister_sea_notifier(struct notifier_block *nb);
> I still don't understand why you need notifiers for this. You register
> precisely one hook in the series.
I didn't see a response to my last comment on the previous series so I 
just left it in for this series.
The notifier usage is consistent with the GHES code for SCI errors which 
are also only used a single
time in the code. If you think making the call directly is a better 
option I will remove the notifiers.
> >   #endif	/* __ASM_SYSTEM_MISC_H */
> > diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c
> > index 05d2bd7..81039c7 100644
> > --- a/arch/arm64/mm/fault.c
> > +++ b/arch/arm64/mm/fault.c
> > @@ -39,6 +39,22 @@
> >   #include <asm/pgtable.h>
> >   #include <asm/tlbflush.h>
> >   
> > +/*
> > + * GHES SEA handler code may register a notifier call here to
> > + * handle HW error record passed from platform.
> > + */
> > +static ATOMIC_NOTIFIER_HEAD(sea_handler_chain);
> > +
> > +int register_sea_notifier(struct notifier_block *nb)
> > +{
> > +	return atomic_notifier_chain_register(&sea_handler_chain, nb);
> > +}
> > +
> > +void unregister_sea_notifier(struct notifier_block *nb)
> > +{
> > +	atomic_notifier_chain_unregister(&sea_handler_chain, nb);
> > +}
> > +
> >   static const char *fault_name(unsigned int esr);
> >   
> >   #ifdef CONFIG_KPROBES
> > @@ -480,6 +496,28 @@ static int do_bad(unsigned long addr, unsigned int esr, struct pt_regs *regs)
> >   	return 1;
> >   }
> >   
> > +/*
> > + * This abort handler deals with Synchronous External Abort.
> > + * It calls notifiers, and then returns "fault".
> > + */
> > +static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
> > +{
> > +	struct siginfo info;
> > +
> > +	atomic_notifier_call_chain(&sea_handler_chain, 0, NULL);
> > +
> > +	pr_err("Synchronous External Abort: %s (0x%08x) at 0x%016lx\n",
> > +		 fault_name(esr), esr, addr);
> > +
> > +	info.si_signo = SIGBUS;
> > +	info.si_errno = 0;
> > +	info.si_code  = 0;
> > +	info.si_addr  = (void __user *)addr;
> > +	arm64_notify_die("", regs, &info, esr);
> > +
> > +	return 0;
> > +}
> > +
> >   static const struct fault_info {
> >   	int	(*fn)(unsigned long addr, unsigned int esr, struct pt_regs *regs);
> >   	int	sig;
> > @@ -502,22 +540,22 @@ static const struct fault_info {
> >   	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 1 permission fault"	},
> >   	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 2 permission fault"	},
> >   	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"level 3 permission fault"	},
> > -	{ do_bad,		SIGBUS,  0,		"synchronous external abort"	},
> > +	{ do_sea,		SIGBUS,  0,		"synchronous external abort"	},
> >   	{ do_bad,		SIGBUS,  0,		"unknown 17"			},
> >   	{ do_bad,		SIGBUS,  0,		"unknown 18"			},
> >   	{ do_bad,		SIGBUS,  0,		"unknown 19"			},
> > -	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
> > -	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
> > -	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
> > -	{ do_bad,		SIGBUS,  0,		"synchronous abort (translation table walk)" },
> > -	{ do_bad,		SIGBUS,  0,		"synchronous parity error"	},
> > +	{ do_sea,		SIGBUS,  0,		"level 0 SEA (translation table walk)"	},
> > +	{ do_sea,		SIGBUS,  0,		"level 1 SEA (translation table walk)"	},
> > +	{ do_sea,		SIGBUS,  0,		"level 2 SEA (translation table walk)"	},
> > +	{ do_sea,		SIGBUS,  0,		"level 3 SEA (translation table walk)"	},
> Perhaps I wasn't clear enough in my previous review, but please expand the
> acronym for strings and comments.
Sorry, I will expand these.
> > +	{ do_sea,		SIGBUS,  0,		"synchronous parity or ECC err" },
> s/err/error/
>
> Will
Thanks,
Tyler

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.