[PATCH] ARM: DT: STiH407: Add RTS / CTS pinctrl definition for UARTs.

[Peter Griffin]

The uart IP is capable of doing hardware flow control. Define
the RTS and CTS pins for STiH407 family Socs so we can use this
feature in the future if we wish to.

Signed-off-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
---
 arch/arm/boot/dts/stih407-pinctrl.dtsi | 50 ++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index daab16b..3bbb0c0 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -149,6 +149,16 @@
 						rx = <&pio3 5 ALT1 IN>;
 					};
 				};
+				pinctrl_sbc_serial0_rts: sbc_serial0-0_rts {
+					st,pins {
+						rts = <&pio3 7 ALT1 OUT>;
+					};
+				};
+				pinctrl_sbc_serial0_cts: sbc_serial0-0_cts {
+					st,pins {
+						cts = <&pio3 6 ALT1 IN>;
+					};
+				};
 			};
 			/* SBC_ASC1 - UART11 */
 			sbc_serial1 {
@@ -158,6 +168,16 @@
 						rx = <&pio2 7 ALT3 IN>;
 					};
 				};
+				pinctrl_sbc_serial1_rts: sbc_serial1-0_rts {
+					st,pins {
+						rts = <&pio3 1 ALT3 OUT>;
+					};
+				};
+				pinctrl_sbc_serial1_cts: sbc_serial1-0_cts {
+					st,pins {
+						cts = <&pio3 0 ALT3 IN>;
+					};
+				};
 			};
 
 			i2c10 {
@@ -469,6 +489,16 @@
 						rx = <&pio17 1 ALT1 IN>;
 					};
 				};
+				pinctrl_serial0_rts: serial0-0_rts {
+					st,pins {
+						rts = <&pio17 3	ALT1 OUT>;
+					};
+				};
+				pinctrl_serial0_cts: serial0-0_cts {
+					st,pins {
+						cts = <&pio17 2	ALT1 IN>;
+					};
+				};
 			};
 
 			serial1 {
@@ -478,6 +508,16 @@
 						rx = <&pio16 1 ALT1 IN>;
 					};
 				};
+				pinctrl_serial1_rts: serial1-0_rts {
+					st,pins {
+						rts = <&pio16 3	ALT1 OUT>;
+					};
+				};
+				pinctrl_serial1_cts: serial1-0_cts {
+					st,pins {
+						cts = <&pio16 2 ALT1 IN>;
+					};
+				};
 			};
 
 			serial2 {
@@ -487,6 +527,16 @@
 						rx = <&pio15 1 ALT1 IN>;
 					};
 				};
+				pinctrl_serial2_rts: serial2-0_rts {
+					st,pins {
+						rts = <&pio15 3	ALT1 OUT>;
+					};
+				};
+				pinctrl_serial2_cts: serial2-0_cts {
+					st,pins {
+						cts = <&pio15 2	ALT1 IN>;
+					};
+				};
 			};
 
 			mmc1 {
-- 
2.7.4