Re: [PATCH v2 6+/6] platform/x86: dell-wmi-led: fix coding style issues

[Jacek Anaszewski]

Hi MichaÅ,

On 01/17/2017 10:19 AM, MichaÅ KÄpieÅ wrote:
>> On Tue, 2017-01-17 at 08:17 +0100, MichaÅ KÄpieÅ wrote:
>>> Fix coding style issues in dell-wmi-led which checkpatch complains about
>>> to make sure the module gets a clean start in the x86 platform driver
>>> subsystem.
>>
>> trivia:
>>
>>> Signed-off-by: MichaÅ KÄpieÅ <kernel@xxxxxxxxxx>
>>> ---
>>> This is an extra patch that Jacek asked for [1].
>>>
>>> [1] https://lkml.org/lkml/2017/1/16/631
>>>
>>>  drivers/platform/x86/dell-wmi-led.c | 41 +++++++++++++++----------------------
>>>  1 file changed, 16 insertions(+), 25 deletions(-)
>>>
>>> diff --git a/drivers/platform/x86/dell-wmi-led.c b/drivers/platform/x86/dell-wmi-led.c
>> []
>>> @@ -46,21 +46,16 @@ struct bios_args {
>>>  	unsigned char off_time;
>>>  };
>>>  
>>> -static int dell_led_perform_fn(u8 length,
>>> -		u8 result_code,
>>> -		u8 device_id,
>>> -		u8 command,
>>> -		u8 on_time,
>>> -		u8 off_time)
>>> +static int dell_led_perform_fn(u8 length, u8 result_code, u8 device_id,
>>> +			       u8 command, u8 on_time, u8 off_time)
>>>  {
>>> -	struct bios_args *bios_return;
>>> -	u8 return_code;
>>> -	union acpi_object *obj;
>>>  	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
>>> +	struct bios_args *bios_return, args;
>>>  	struct acpi_buffer input;
>>> +	union acpi_object *obj;
>>>  	acpi_status status;
>>> +	u8 return_code;
>>>  
>>> -	struct bios_args args;
>>>  	args.length = length;
>>>  	args.result_code = result_code;
>>>  	args.device_id = device_id;
>>
>> This declaration might be nicer using
>>
>> 	struct bios_args args = {
>> 		.length = length,
>> 		.result_code = result_code,
>> 		.device_id = device_id,
>> 		[...]
>> 	};
>>
>> []
>>
>>> @@ -138,24 +128,25 @@ static void dell_led_set(struct led_classdev *led_cdev,
>>>  }
>>>  
>>>  static int dell_led_blink(struct led_classdev *led_cdev,
>>> -		unsigned long *delay_on,
>>> -		unsigned long *delay_off)
>>> +			  unsigned long *delay_on, unsigned long *delay_off)
>>>  {
>>>  	unsigned long on_eighths;
>>>  	unsigned long off_eighths;
>>>  
>>> -	/* The Dell LED delay is based on 125ms intervals.
>>> -	   Need to round up to next interval. */
>>> +	/*
>>> +	 * The Dell LED delay is based on 125ms intervals.
>>> +	 * Need to round up to next interval.
>>> +	 */
>>>  
>>>  	on_eighths = (*delay_on + 124) / 125;
>>> -	if (0 == on_eighths)
>>> +	if (on_eighths == 0)
>>>  		on_eighths = 1;
>>>  	if (on_eighths > 255)
>>>  		on_eighths = 255;
>>>  	*delay_on = on_eighths * 125;
>>>  
>>>  	off_eighths = (*delay_off + 124) / 125;
>>> -	if (0 == off_eighths)
>>> +	if (off_eighths == 0)
>>>  		off_eighths = 1;
>>>  	if (off_eighths > 255)
>>>  		off_eighths = 255;
>>
>> These could use DIV_ROUND_UP and clamp()
> 
> Thanks for taking a look, Joe, I can certainly fix these.
> 
> Jacek, as resending an updated version of this patch with Joe's
> suggestions taken into account would be even more confusing than the
> "PATCH v2 6+/6" subject I already resorted to, I suggest the following:
> if this series goes to v3, I will include an updated version of this
> patch in v3, but in case the remaining patches get acked in their
> current shape by all maintainers, I will send an updated version of this
> extra patch separately, after the rest of the series gets applied.  Does
> this sound reasonable?

Sure. I'll merge whole patch set after getting acks from sound
and x86 platform drivers maintainers.

-- 
Best regards,
Jacek Anaszewski