Re: [RESEND PATCHv1 2/8] mmc: sdhci-msm: Factor out function to set/get msm clock rate

[Adrian Hunter]

On 10/01/17 09:00, Ritesh Harjani wrote:
> Factor out msm_set/get_clock_rate_for_bus_mode for it's later
> use in changing the tuning sequence for selecting HS400
> bus speed mode.
> 
> Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci-msm.c | 64 +++++++++++++++++++++++++++-----------------
>  1 file changed, 40 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 1e42647..3fc496e 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -138,6 +138,45 @@ struct sdhci_msm_host {
>  	bool use_cdclp533;
>  };
>  
> +static unsigned int msm_get_clock_rate_for_bus_mode(struct sdhci_host *host,
> +						    unsigned int clock)
> +{
> +	struct mmc_ios ios = host->mmc->ios;
> +	/*
> +	 * The SDHC requires internal clock frequency to be double the
> +	 * actual clock that will be set for DDR mode. The controller
> +	 * uses the faster clock(100/400MHz) for some of its parts and
> +	 * send the actual required clock (50/200MHz) to the card.
> +	 */
> +	if (ios.timing == MMC_TIMING_UHS_DDR50 ||
> +	    ios.timing == MMC_TIMING_MMC_DDR52 ||
> +	    ios.timing == MMC_TIMING_MMC_HS400)
> +		clock *= 2;
> +	return clock;
> +}
> +
> +static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
> +					    unsigned int clock)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> +	struct mmc_ios curr_ios = host->mmc->ios;
> +	int rc;
> +
> +	clock = msm_get_clock_rate_for_bus_mode(host, clock);
> +	rc = clk_set_rate(msm_host->clk, clock);
> +	if (rc) {
> +		pr_err("%s: Failed to set clock at rate %u at timing %d\n",
> +		       mmc_hostname(host->mmc), clock,
> +		       curr_ios.timing);
> +		return;
> +	}
> +	msm_host->clk_rate = clock;
> +	pr_debug("%s: Setting clock at rate %lu at timing %d\n",
> +		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk),
> +		 curr_ios.timing);
> +}
> +
>  /* Platform specific tuning */
>  static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
>  {
> @@ -1006,8 +1045,6 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>  {
>  	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>  	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> -	struct mmc_ios curr_ios = host->mmc->ios;
> -	int rc;
>  
>  	if (!clock) {
>  		msm_host->clk_rate = clock;
> @@ -1015,32 +1052,11 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
>  	}
>  
>  	spin_unlock_irq(&host->lock);
> -	/*
> -	 * The SDHC requires internal clock frequency to be double the
> -	 * actual clock that will be set for DDR mode. The controller
> -	 * uses the faster clock(100/400MHz) for some of its parts and
> -	 * send the actual required clock (50/200MHz) to the card.
> -	 */
> -	if (curr_ios.timing == MMC_TIMING_UHS_DDR50 ||
> -	    curr_ios.timing == MMC_TIMING_MMC_DDR52 ||
> -	    curr_ios.timing == MMC_TIMING_MMC_HS400)
> -		clock *= 2;
>  
>  	sdhci_msm_hc_select_mode(host);
>  
> -	rc = clk_set_rate(msm_host->clk, clock);
> -	if (rc) {
> -		pr_err("%s: Failed to set clock at rate %u at timing %d\n",
> -		       mmc_hostname(host->mmc), clock,
> -		       curr_ios.timing);
> -		goto out_lock;
> -	}
> -	msm_host->clk_rate = clock;
> -	pr_debug("%s: Setting clock at rate %lu at timing %d\n",
> -		 mmc_hostname(host->mmc), clk_get_rate(msm_host->clk),
> -		 curr_ios.timing);
> +	msm_set_clock_rate_for_bus_mode(host, clock);
>  
> -out_lock:
>  	spin_lock_irq(&host->lock);
>  out:
>  	__sdhci_msm_set_clock(host, clock);
>