[PATCH 5/5] iio: stx104: Add GPIO set_multiple callback function support

From: William Breathitt Gray
Date: Thu Jan 19 2017 - 10:15:46 EST


The Apex Embedded Systems STX104 series provides a digital output
register where 4 lines may be set at a time. This patch add support for
the set_multiple callback function, thus allowing multiple digital
output lines to be set more efficiently in groups.

Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Hartmut Knaack <knaack.h@xxxxxx>
Cc: Lars-Peter Clausen <lars@xxxxxxxxxx>
Cc: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
Signed-off-by: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
---
drivers/iio/adc/stx104.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/drivers/iio/adc/stx104.c b/drivers/iio/adc/stx104.c
index 7e3645749eaf..6971293909f7 100644
--- a/drivers/iio/adc/stx104.c
+++ b/drivers/iio/adc/stx104.c
@@ -266,6 +266,28 @@ static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
spin_unlock_irqrestore(&stx104gpio->lock, flags);
}

+static void stx104_gpio_set_multiple(struct gpio_chip *chip,
+ unsigned long *mask, unsigned long *bits)
+{
+ struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
+ unsigned long flags;
+
+ /* verify masked GPIO are output */
+ if (!(*mask & 0xF0))
+ return;
+
+ *mask >>= 4;
+ *bits >>= 4;
+
+ spin_lock_irqsave(&stx104gpio->lock, flags);
+
+ stx104gpio->out_state &= ~*mask;
+ stx104gpio->out_state |= *mask & *bits;
+ outb(stx104gpio->out_state, stx104gpio->base);
+
+ spin_unlock_irqrestore(&stx104gpio->lock, flags);
+}
+
static int stx104_probe(struct device *dev, unsigned int id)
{
struct iio_dev *indio_dev;
@@ -330,6 +352,7 @@ static int stx104_probe(struct device *dev, unsigned int id)
stx104gpio->chip.direction_output = stx104_gpio_direction_output;
stx104gpio->chip.get = stx104_gpio_get;
stx104gpio->chip.set = stx104_gpio_set;
+ stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
stx104gpio->base = base[id] + 3;
stx104gpio->out_state = 0x0;

--
2.11.0