[PATCH] net: intel: e1000: use new api ethtool_{get|set}_link_ksettings

From: Philippe Reynes
Date: Sat Jan 21 2017 - 10:06:28 EST

Next message: Jonathan Cameron: "Re: [PATCH 0/3] ti,ads7950 device tree bindings"
Previous message: Zhihui Zhang: "Re: [PATCH] timers: Reconcile the code and the comment for the 250HZ case"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
---
drivers/net/ethernet/intel/e1000/e1000_ethtool.c | 93 +++++++++++-----------
1 files changed, 46 insertions(+), 47 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 975eeb8..024a4b5 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -103,104 +103,104 @@ struct e1000_stats {

#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)

-static int e1000_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int e1000_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 supported, advertising;

if (hw->media_type == e1000_media_type_copper) {
- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full|
SUPPORTED_Autoneg |
SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
+ advertising = ADVERTISED_TP;

if (hw->autoneg == 1) {
- ecmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
/* the e1000 autoneg seems to match ethtool nicely */
- ecmd->advertising |= hw->autoneg_advertised;
+ advertising |= hw->autoneg_advertised;
}

- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy_addr;
-
- if (hw->mac_type == e1000_82543)
- ecmd->transceiver = XCVR_EXTERNAL;
- else
- ecmd->transceiver = XCVR_INTERNAL;
-
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = hw->phy_addr;
} else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
+ supported = (SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE |
SUPPORTED_Autoneg);

- ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ advertising = (ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg);

- ecmd->port = PORT_FIBRE;
-
- if (hw->mac_type >= e1000_82545)
- ecmd->transceiver = XCVR_INTERNAL;
- else
- ecmd->transceiver = XCVR_EXTERNAL;
+ cmd->base.port = PORT_FIBRE;
}

if (er32(STATUS) & E1000_STATUS_LU) {
e1000_get_speed_and_duplex(hw, &adapter->link_speed,
&adapter->link_duplex);
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
+ cmd->base.speed = adapter->link_speed;

/* unfortunately FULL_DUPLEX != DUPLEX_FULL
* and HALF_DUPLEX != DUPLEX_HALF
*/
if (adapter->link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
else
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.speed = SPEED_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}

- ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ cmd->base.autoneg = ((hw->media_type == e1000_media_type_fiber) ||
hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;

/* MDI-X => 1; MDI => 0 */
if ((hw->media_type == e1000_media_type_copper) &&
netif_carrier_ok(netdev))
- ecmd->eth_tp_mdix = (!!adapter->phy_info.mdix_mode ?
+ cmd->base.eth_tp_mdix = (!!adapter->phy_info.mdix_mode ?
ETH_TP_MDI_X : ETH_TP_MDI);
else
- ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;

if (hw->mdix == AUTO_ALL_MODES)
- ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
- ecmd->eth_tp_mdix_ctrl = hw->mdix;
+ cmd->base.eth_tp_mdix_ctrl = hw->mdix;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}

-static int e1000_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
+static int e1000_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);

/* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
- if (ecmd->eth_tp_mdix_ctrl) {
+ if (cmd->base.eth_tp_mdix_ctrl) {
if (hw->media_type != e1000_media_type_copper)
return -EOPNOTSUPP;

- if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
- (ecmd->autoneg != AUTONEG_ENABLE)) {
+ if ((cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (cmd->base.autoneg != AUTONEG_ENABLE)) {
e_err(drv, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
@@ -209,32 +209,31 @@ static int e1000_set_settings(struct net_device *netdev,
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
msleep(1);

- if (ecmd->autoneg == AUTONEG_ENABLE) {
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
hw->autoneg = 1;
if (hw->media_type == e1000_media_type_fiber)
hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
else
- hw->autoneg_advertised = ecmd->advertising |
+ hw->autoneg_advertised = advertising |
ADVERTISED_TP |
ADVERTISED_Autoneg;
- ecmd->advertising = hw->autoneg_advertised;
} else {
- u32 speed = ethtool_cmd_speed(ecmd);
+ u32 speed = cmd->base.speed;
/* calling this overrides forced MDI setting */
- if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ if (e1000_set_spd_dplx(adapter, speed, cmd->base.duplex)) {
clear_bit(__E1000_RESETTING, &adapter->flags);
return -EINVAL;
}
}

/* MDI-X => 2; MDI => 1; Auto => 3 */
- if (ecmd->eth_tp_mdix_ctrl) {
- if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ if (cmd->base.eth_tp_mdix_ctrl) {
+ if (cmd->base.eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->mdix = AUTO_ALL_MODES;
else
- hw->mdix = ecmd->eth_tp_mdix_ctrl;
+ hw->mdix = cmd->base.eth_tp_mdix_ctrl;
}

/* reset the link */
@@ -1875,8 +1874,6 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
}

static const struct ethtool_ops e1000_ethtool_ops = {
- .get_settings = e1000_get_settings,
- .set_settings = e1000_set_settings,
.get_drvinfo = e1000_get_drvinfo,
.get_regs_len = e1000_get_regs_len,
.get_regs = e1000_get_regs,
@@ -1901,6 +1898,8 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
.get_ts_info = ethtool_op_get_ts_info,
+ .get_link_ksettings = e1000_get_link_ksettings,
+ .set_link_ksettings = e1000_set_link_ksettings,
};

void e1000_set_ethtool_ops(struct net_device *netdev)
--
1.7.4.4

Next message: Jonathan Cameron: "Re: [PATCH 0/3] ti,ads7950 device tree bindings"
Previous message: Zhihui Zhang: "Re: [PATCH] timers: Reconcile the code and the comment for the 250HZ case"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]