Re: [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins
From: Ulf Hansson
Date: Mon Jan 23 2017 - 05:40:43 EST
On 22 January 2017 at 15:49, Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote:
> Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
> the pins being properly configured before the driver probes.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Acked-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Kind regards
Uffe
> ---
> drivers/mmc/host/jz4740_mmc.c | 45 +++++--------------------------------------
> 1 file changed, 5 insertions(+), 40 deletions(-)
>
> v2: Set pin sleep/default state in suspend/resume callbacks
>
> diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
> index 819ad32964fc..b5fec5b7ee7b 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -20,14 +20,13 @@
> #include <linux/irq.h>
> #include <linux/interrupt.h>
> #include <linux/module.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/delay.h>
> #include <linux/scatterlist.h>
> #include <linux/clk.h>
>
> #include <linux/bitops.h>
> -#include <linux/gpio.h>
> -#include <asm/mach-jz4740/gpio.h>
> #include <asm/cacheflush.h>
> #include <linux/dma-mapping.h>
> #include <linux/dmaengine.h>
> @@ -906,15 +905,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
> .enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
> };
>
> -static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = {
> - JZ_GPIO_BULK_PIN(MSC_CMD),
> - JZ_GPIO_BULK_PIN(MSC_CLK),
> - JZ_GPIO_BULK_PIN(MSC_DATA0),
> - JZ_GPIO_BULK_PIN(MSC_DATA1),
> - JZ_GPIO_BULK_PIN(MSC_DATA2),
> - JZ_GPIO_BULK_PIN(MSC_DATA3),
> -};
> -
> static int jz4740_mmc_request_gpio(struct device *dev, int gpio,
> const char *name, bool output, int value)
> {
> @@ -978,15 +968,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev)
> gpio_free(pdata->gpio_power);
> }
>
> -static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host)
> -{
> - size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins);
> - if (host->pdata && host->pdata->data_1bit)
> - num_pins -= 3;
> -
> - return num_pins;
> -}
> -
> static int jz4740_mmc_probe(struct platform_device* pdev)
> {
> int ret;
> @@ -1027,15 +1008,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
> goto err_free_host;
> }
>
> - ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret);
> - goto err_free_host;
> - }
> -
> ret = jz4740_mmc_request_gpios(mmc, pdev);
> if (ret)
> - goto err_gpio_bulk_free;
> + goto err_release_dma;
>
> mmc->ops = &jz4740_mmc_ops;
> mmc->f_min = JZ_MMC_CLK_RATE / 128;
> @@ -1091,10 +1066,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev)
> free_irq(host->irq, host);
> err_free_gpios:
> jz4740_mmc_free_gpios(pdev);
> -err_gpio_bulk_free:
> +err_release_dma:
> if (host->use_dma)
> jz4740_mmc_release_dma_channels(host);
> - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
> err_free_host:
> mmc_free_host(mmc);
>
> @@ -1114,7 +1088,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
> free_irq(host->irq, host);
>
> jz4740_mmc_free_gpios(pdev);
> - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
>
> if (host->use_dma)
> jz4740_mmc_release_dma_channels(host);
> @@ -1128,20 +1101,12 @@ static int jz4740_mmc_remove(struct platform_device *pdev)
>
> static int jz4740_mmc_suspend(struct device *dev)
> {
> - struct jz4740_mmc_host *host = dev_get_drvdata(dev);
> -
> - jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
> -
> - return 0;
> + return pinctrl_pm_select_sleep_state(dev);
> }
>
> static int jz4740_mmc_resume(struct device *dev)
> {
> - struct jz4740_mmc_host *host = dev_get_drvdata(dev);
> -
> - jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host));
> -
> - return 0;
> + return pinctrl_pm_select_default_state(dev);
> }
>
> static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend,
> --
> 2.11.0
>