[PATCH] regulator: anatop: Add support for "anatop-enable-bit"

From: Andrey Smirnov
Date: Tue Jan 10 2017 - 11:30:14 EST


Add code to support support for "anatop-enable-bit" device-tree
property. This property translates to LINREG_ENABLE bit in real hardware
and is present on 1p1, 2p5 and 3p0 regulators on i.MX6 and 1p0d regulator
on i.MX7.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
.../devicetree/bindings/regulator/anatop-regulator.txt | 1 +
drivers/regulator/anatop-regulator.c | 12 ++++++++++++
2 files changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
index 37c4ea076f88..1d58c8cfdbc0 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -14,6 +14,7 @@ Optional properties:
- anatop-delay-bit-shift: Bit shift for the step time register
- anatop-delay-bit-width: Number of bits used in the step time register
- vin-supply: The supply for this regulator
+- anatop-enable-bit: Regulator enable bit offset

Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 3a6d0290c54c..b041f277a38b 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -301,7 +301,19 @@ static int anatop_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
} else {
+ u32 enable_bit;
+
rdesc->ops = &anatop_rops;
+
+ if (!of_property_read_u32(np, "anatop-enable-bit",
+ &enable_bit)) {
+ anatop_rops.enable = regulator_enable_regmap;
+ anatop_rops.disable = regulator_disable_regmap;
+ anatop_rops.is_enabled = regulator_is_enabled_regmap;
+
+ rdesc->enable_reg = sreg->control_reg;
+ rdesc->enable_mask = BIT(enable_bit);
+ }
}

/* register regulator */
--
2.11.0