Re: [PATCH v3 7/13] mmc: sunxi: Add more debug messages

From: Maxime Ripard
Date: Wed Jan 25 2017 - 04:17:10 EST


On Tue, Jan 24, 2017 at 09:22:24AM +0100, Ulf Hansson wrote:
> On 16 January 2017 at 17:56, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > Add a bit more debug messages that can be helpful when debugging the clock
> > setup.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > ---
> > drivers/mmc/host/sunxi-mmc.c | 10 ++++++++--
> > 1 file changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> > index f0f6922bca8a..40ed287ceb1c 100644
> > --- a/drivers/mmc/host/sunxi-mmc.c
> > +++ b/drivers/mmc/host/sunxi-mmc.c
> > @@ -661,6 +661,9 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
> > unsigned long expire = jiffies + msecs_to_jiffies(750);
> > u32 rval;
> >
> > + dev_dbg(mmc_dev(host->mmc), "%sabling the clock\n",
> > + oclk_en ? "en" : "dis");
> > +
> > rval = mmc_readl(host, REG_CLKCR);
> > rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON | SDXC_MASK_DATA0);
> >
> > @@ -737,6 +740,7 @@ static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host,
> > index = SDXC_CLK_50M_DDR;
> > }
> > } else {
> > + dev_dbg(mmc_dev(host->mmc), "Invalid clock... returning\n");
> > return -EINVAL;
> > }
> >
> > @@ -753,6 +757,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
> > u32 rval, clock = ios->clock;
> > int ret;
> >
> > + dev_dbg(mmc_dev(host->mmc), "setting clk to %u (requested %u)\n",
> > + clock, ios->clock);
> > +
> >
>
> A better option is to update mmc->actual_clock. That value is
> available (and the requested value) though the debugFS nodes.

Ok, I will change that.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature