Re: [PATCH v1 2/3] x86: Remap GDT tables in the Fixmap section

From: Thomas Garnier
Date: Wed Jan 25 2017 - 15:10:29 EST


The kbuild bot found interesting build errors with the new
BUILD_BUG_ON on 32bit (64G mem support). I think I went a bit too far
with them given the ioremap part is just temporary on early boot.

I removed them and tested different configurations trying to use as
much fixmap as possible (DEBUG_HIGHMEM, 64G/PAE support and more).
Everything looks good and we can still support 512 processors.

Next iteration, I will remove the BUILD_BUG_ON that I added and remove
restriction to 256 back to 512. On top of all changes suggested by
Andy on the patch set.

On Fri, Jan 20, 2017 at 5:06 PM, Thomas Garnier <thgarnie@xxxxxxxxxx> wrote:
> On Fri, Jan 20, 2017 at 4:57 PM, Andy Lutomirski <luto@xxxxxxxxxxxxxx> wrote:
>> On Fri, Jan 20, 2017 at 8:41 AM, Thomas Garnier <thgarnie@xxxxxxxxxx> wrote:
>>> Each processor holds a GDT in its per-cpu structure. The sgdt
>>> instruction gives the base address of the current GDT. This address can
>>> be used to bypass KASLR memory randomization. With another bug, an
>>> attacker could target other per-cpu structures or deduce the base of
>>> the main memory section (PAGE_OFFSET).
>>>
>>> This patch relocates the GDT table for each processor inside the
>>> Fixmap section. The space is reserved based on number of supported
>>> cpus.
>>>
>>> For consistency, the remapping is done by default on 32 and 64 bit.
>>>
>>> Each processor switches to its remapped GDT at the end of
>>> initialization. For hibernation, the main processor returns with the
>>> original GDT and switches back to the remapping at completion.
>>>
>>> On 32 bit, the maximum number of processors is now 256. The Fixmap
>>> section cannot handle the original 512. Additional asserts ensure that
>>> the Fixmap section cannot grow beyond the space available.
>>>
>>> This patch was tested on both architectures. Hibernation and KVM were
>>> both tested specially for their usage of the GDT.
>>>
>>> Signed-off-by: Thomas Garnier <thgarnie@xxxxxxxxxx>
>>> ---
>>> Based on next-20170119
>>> ---
>>> arch/x86/Kconfig | 1 +
>>> arch/x86/include/asm/fixmap.h | 4 ++++
>>> arch/x86/include/asm/processor.h | 1 +
>>> arch/x86/kernel/cpu/common.c | 18 +++++++++++++++++-
>>> arch/x86/mm/init_32.c | 2 ++
>>> arch/x86/power/cpu.c | 3 +++
>>> 6 files changed, 28 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
>>> index f1d4e8f2131f..b4ed35db10a8 100644
>>> --- a/arch/x86/Kconfig
>>> +++ b/arch/x86/Kconfig
>>> @@ -912,6 +912,7 @@ config MAXSMP
>>> config NR_CPUS
>>> int "Maximum number of CPUs" if SMP && !MAXSMP
>>> range 2 8 if SMP && X86_32 && !X86_BIGSMP
>>> + range 2 256 if SMP && X86_32 && X86_BIGSMP
>>> range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK
>>> range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
>>> default "1" if !SMP
>>> diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
>>> index c46289799b02..8b913b5e9383 100644
>>> --- a/arch/x86/include/asm/fixmap.h
>>> +++ b/arch/x86/include/asm/fixmap.h
>>> @@ -100,6 +100,10 @@ enum fixed_addresses {
>>> #ifdef CONFIG_X86_INTEL_MID
>>> FIX_LNW_VRTC,
>>> #endif
>>> + /* Fixmap entries to remap the GDTs, one per processor. */
>>> + FIX_GDT_REMAP_BEGIN,
>>> + FIX_GDT_REMAP_END = FIX_GDT_REMAP_BEGIN + NR_CPUS - 1,
>>> +
>>> __end_of_permanent_fixed_addresses,
>>>
>>> /*
>>> diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
>>> index 1be64da0384e..280211ad8be9 100644
>>> --- a/arch/x86/include/asm/processor.h
>>> +++ b/arch/x86/include/asm/processor.h
>>> @@ -705,6 +705,7 @@ extern struct desc_ptr early_gdt_descr;
>>>
>>> extern void cpu_set_gdt(int);
>>> extern void switch_to_new_gdt(int);
>>> +extern void load_remapped_gdt(int);
>>> extern void load_percpu_segment(int);
>>> extern void cpu_init(void);
>>>
>>> diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
>>> index e97ffc8d29f4..7d940b0e805a 100644
>>> --- a/arch/x86/kernel/cpu/common.c
>>> +++ b/arch/x86/kernel/cpu/common.c
>>> @@ -443,6 +443,19 @@ void load_percpu_segment(int cpu)
>>> load_stack_canary_segment();
>>> }
>>>
>>> +/* Load a fixmap remapping of the per-cpu GDT */
>>> +void load_remapped_gdt(int cpu)
>>> +{
>>> + struct desc_ptr gdt_descr;
>>> + unsigned long idx = FIX_GDT_REMAP_BEGIN + cpu;
>>> +
>>> + __set_fixmap(idx, __pa(get_cpu_gdt_table(cpu)), PAGE_KERNEL);
>>> +
>>> + gdt_descr.address = (long)__fix_to_virt(idx);
>>> + gdt_descr.size = GDT_SIZE - 1;
>>> + load_gdt(&gdt_descr);
>>> +}
>>
>> IMO this should be split into two functions, one to set up the fixmap
>> entry and one to load the GDT.
>>
>
> That make sense.
>
>> Also, would it be possible to rename the various gdt helpers so that
>> their functionality is more obvious? For example, get_cpu_gdt_table()
>> could be get_cpu_direct_gdt_table() and the function to load the gdt
>> could be load_fixmap_gdt().
>>
>
> Sure no problem.
>
>> --Andy
>
>
>
> --
> Thomas



--
Thomas