Re: [PATCH v5 1/4] usb: dbc: early driver for xhci debug capability

[Lu Baolu]

Hi Ingo,

On 01/25/2017 05:23 PM, Ingo Molnar wrote:
> * Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> wrote:
>
>>> Hiding essentially an early udelay() implementation in an early-printk driver is 
>>> ugly and counterproductive.
>> Sure. How about below change?
>>
>> diff --git a/drivers/usb/early/xhci-dbc.c b/drivers/usb/early/xhci-dbc.c
>> index d3f0c84..940989e 100644
>> --- a/drivers/usb/early/xhci-dbc.c
>> +++ b/drivers/usb/early/xhci-dbc.c
>> @@ -587,6 +587,35 @@ static int xdbc_bulk_transfer(void *data, int size, bool read)
>>         return size;
>>  }
>>  
>> +static void __init xdbc_udelay_calibration(void)
>> +{
>> +       unsigned long lpj = 0;
>> +       unsigned int tsc_khz, cpu_khz;
>> +
>> +       if (!boot_cpu_has(X86_FEATURE_TSC))
>> +               goto calibration_out;
>> +
>> +       cpu_khz = x86_platform.calibrate_cpu();
>> +       tsc_khz = x86_platform.calibrate_tsc();
>> +
>> +       if (tsc_khz == 0)
>> +               tsc_khz = cpu_khz;
>> +       else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
>> +               cpu_khz = tsc_khz;
>> +
>> +       if (!tsc_khz)
>> +               goto calibration_out;
>> +
>> +       lpj = tsc_khz * 1000;
>> +       do_div(lpj, HZ);
>> +
>> +calibration_out:
>> +       if (!lpj)
>> +               lpj = 1 << 22;
>> +
>> +       loops_per_jiffy = lpj;
>> +}
>> +
>>  static int __init xdbc_early_setup(void)
>>  {
>>         int ret;
>> @@ -686,6 +715,8 @@ int __init early_xdbc_parse_parameter(char *s)
>>         }
>>         xdbc.xdbc_reg = (struct xdbc_regs __iomem *)(xdbc.xhci_base + offset);
>>  
>> +       xdbc_udelay_calibration();
>> +
>>         return 0;
>>  }
> Yeah - so could we do this in a more generic fashion, not in the early-printk 
> driver but in core x86 code?

How about below changes?

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 4cfba94..aab7faa 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -835,6 +835,26 @@ dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p)
        return 0;
 }
 
+static void __init simple_udelay_calibration(void)
+{
+       unsigned int tsc_khz, cpu_khz;
+       unsigned long lpj;
+
+       if (!boot_cpu_has(X86_FEATURE_TSC))
+               return;
+
+       cpu_khz = x86_platform.calibrate_cpu();
+       tsc_khz = x86_platform.calibrate_tsc();
+
+       tsc_khz = tsc_khz ? : cpu_khz;
+       if (!tsc_khz)
+               return;
+
+       lpj = tsc_khz * 1000;
+       do_div(lpj, HZ);
+       loops_per_jiffy = lpj;
+}
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -983,6 +1003,8 @@ void __init setup_arch(char **cmdline_p)
         */
        x86_configure_nx();
 
+       simple_udelay_calibration();
+
        parse_early_param();


If it's okay for you, do you want it in a separated patch or part of patch 2/4?

Best regards,
Lu Baolu