[PATCH 4.9 45/66] [media] v4l: tvp5150: Fix comment regarding output pin muxing
From: Greg Kroah-Hartman
Date: Tue Jan 31 2017 - 00:41:35 EST
4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
commit b4b2de386bbb6589d81596999d4a924928dc119b upstream.
The FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK pins are muxed differently
depending on whether the input is an S-Video or composite signal. The
comment that explains the logic doesn't reflect the code. It appears
that the comment is incorrect, as disabling the output data bus in
composite mode makes no sense. Update the comment to match the code.
While at it define macros for the MISC_CTL register bits, the code is
too confusing with numerical values.
Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/media/i2c/tvp5150.c | 24 +++++++++++++++++-------
drivers/media/i2c/tvp5150_reg.h | 9 +++++++++
2 files changed, 26 insertions(+), 7 deletions(-)
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -288,8 +288,12 @@ static inline void tvp5150_selmux(struct
tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
- /* Svideo should enable YCrCb output and disable GPCL output
- * For Composite and TV, it should be the reverse
+ /*
+ * Setup the FID/GLCO/VLK/HVLK and INTREQ/GPCL/VBLK output signals. For
+ * S-Video we output the vertical lock (VLK) signal on FID/GLCO/VLK/HVLK
+ * and set INTREQ/GPCL/VBLK to logic 0. For composite we output the
+ * field indicator (FID) signal on FID/GLCO/VLK/HVLK and set
+ * INTREQ/GPCL/VBLK to logic 1.
*/
val = tvp5150_read(sd, TVP5150_MISC_CTL);
if (val < 0) {
@@ -298,9 +302,9 @@ static inline void tvp5150_selmux(struct
}
if (decoder->input == TVP5150_SVIDEO)
- val = (val & ~0x40) | 0x10;
+ val = (val & ~TVP5150_MISC_CTL_GPCL) | TVP5150_MISC_CTL_HVLK;
else
- val = (val & ~0x10) | 0x40;
+ val = (val & ~TVP5150_MISC_CTL_HVLK) | TVP5150_MISC_CTL_GPCL;
tvp5150_write(sd, TVP5150_MISC_CTL, val);
};
@@ -452,7 +456,12 @@ static const struct i2c_reg_value tvp515
},{ /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
},{ /* Activate YCrCb output 0x9 or 0xd ? */
- TVP5150_MISC_CTL, 0x6f
+ TVP5150_MISC_CTL, TVP5150_MISC_CTL_GPCL |
+ TVP5150_MISC_CTL_INTREQ_OE |
+ TVP5150_MISC_CTL_YCBCR_OE |
+ TVP5150_MISC_CTL_SYNC_OE |
+ TVP5150_MISC_CTL_VBLANK |
+ TVP5150_MISC_CTL_CLOCK_OE,
},{ /* Activates video std autodetection for all standards */
TVP5150_AUTOSW_MSK, 0x0
},{ /* Default format: 0x47. For 4:2:2: 0x40 */
@@ -1047,11 +1056,12 @@ static int tvp5150_s_stream(struct v4l2_
{
struct tvp5150 *decoder = to_tvp5150(sd);
/* Output format: 8-bit ITU-R BT.656 with embedded syncs */
- int val = 0x09;
+ int val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_CLOCK_OE;
/* Output format: 8-bit 4:2:2 YUV with discrete sync */
if (decoder->mbus_type == V4L2_MBUS_PARALLEL)
- val = 0x0d;
+ val = TVP5150_MISC_CTL_YCBCR_OE | TVP5150_MISC_CTL_SYNC_OE
+ | TVP5150_MISC_CTL_CLOCK_OE;
/* Initializes TVP5150 to its default values */
/* # set PCLK (27MHz) */
--- a/drivers/media/i2c/tvp5150_reg.h
+++ b/drivers/media/i2c/tvp5150_reg.h
@@ -9,6 +9,15 @@
#define TVP5150_ANAL_CHL_CTL 0x01 /* Analog channel controls */
#define TVP5150_OP_MODE_CTL 0x02 /* Operation mode controls */
#define TVP5150_MISC_CTL 0x03 /* Miscellaneous controls */
+#define TVP5150_MISC_CTL_VBLK_GPCL BIT(7)
+#define TVP5150_MISC_CTL_GPCL BIT(6)
+#define TVP5150_MISC_CTL_INTREQ_OE BIT(5)
+#define TVP5150_MISC_CTL_HVLK BIT(4)
+#define TVP5150_MISC_CTL_YCBCR_OE BIT(3)
+#define TVP5150_MISC_CTL_SYNC_OE BIT(2)
+#define TVP5150_MISC_CTL_VBLANK BIT(1)
+#define TVP5150_MISC_CTL_CLOCK_OE BIT(0)
+
#define TVP5150_AUTOSW_MSK 0x04 /* Autoswitch mask: TVP5150A / TVP5150AM */
/* Reserved 05h */