[PATCH] ARM: dts: armada-38x add node labels
From: Chris Packham
Date: Wed Feb 01 2017 - 04:03:21 EST
As was done with Armada XP, add node labels to Armada 38x common and SoC
specific nodes to make them easier to reference in board device trees.
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-385.dtsi | 20 +++++++++-----------
arch/arm/boot/dts/armada-388.dtsi | 9 ++++-----
arch/arm/boot/dts/armada-38x.dtsi | 38 +++++++++++++++++++-------------------
3 files changed, 32 insertions(+), 35 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 8e63be33472e..7fcc4c4885cf 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -70,13 +70,7 @@
};
soc {
- internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- };
- };
-
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -106,7 +100,7 @@
* configured in x4 by the bootloader, then
* pcie@4,0 is not available.
*/
- pcie@1,0 {
+ pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -124,7 +118,7 @@
};
/* x1 port */
- pcie@2,0 {
+ pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -142,7 +136,7 @@
};
/* x1 port */
- pcie@3,0 {
+ pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -163,7 +157,7 @@
* x1 port only available when pcie@1,0 is
* configured as a x1 port
*/
- pcie@4,0 {
+ pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -182,3 +176,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
index 564fa5937e25..1c0d151b2aaa 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/armada-388.dtsi
@@ -50,13 +50,8 @@
model = "Marvell Armada 388 family SoC";
compatible = "marvell,armada388", "marvell,armada385",
"marvell,armada380";
-
soc {
internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6828-pinctrl";
- };
-
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -68,3 +63,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 79b767507eab..c558a5d6a21f 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -82,7 +82,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
};
- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -92,7 +92,7 @@
status = "disabled";
};
- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -102,7 +102,7 @@
status = "disabled";
};
- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -112,7 +112,7 @@
status = "disabled";
};
- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -122,7 +122,7 @@
status = "disabled";
};
- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -339,7 +339,7 @@
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
- system-controller@18200 {
+ systemc: system-controller@18200 {
compatible = "marvell,armada-380-system-controller",
"marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
@@ -373,7 +373,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
- timer@20300 {
+ timer: timer@20300 {
compatible = "marvell,armada-380-timer",
"marvell,armada-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
@@ -387,14 +387,14 @@
clock-names = "nbclk", "fixed";
};
- watchdog@20300 {
+ watchdog: watchdog@20300 {
compatible = "marvell,armada-380-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};
- cpurst@20800 {
+ cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
@@ -404,12 +404,12 @@
reg = <0x20d20 0x6c>;
};
- coherency-fabric@21010 {
+ coherencyfab: coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
};
- pmsu@22000 {
+ pmsu: pmsu@22000 {
compatible = "marvell,armada-380-pmsu";
reg = <0x22000 0x1000>;
};
@@ -451,7 +451,7 @@
status = "disabled";
};
- usb@58000 {
+ usb0: usb@58000 {
compatible = "marvell,orion-ehci";
reg = <0x58000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -459,7 +459,7 @@
status = "disabled";
};
- xor@60800 {
+ xor0: xor@60800 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
@@ -479,7 +479,7 @@
};
};
- xor@60900 {
+ xor1: xor@60900 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -507,7 +507,7 @@
clocks = <&gateclk 4>;
};
- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,armada-38x-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -522,7 +522,7 @@
marvell,crypto-sram-size = <0x800>;
};
- rtc@a3800 {
+ rtc: rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
reg-names = "rtc", "rtc-soc";
@@ -561,13 +561,13 @@
clock-output-names = "nand";
};
- thermal@e8078 {
+ thermal: thermal@e8078 {
compatible = "marvell,armada380-thermal";
reg = <0xe4078 0x4>, <0xe4074 0x4>;
status = "okay";
};
- flash@d0000 {
+ nand: flash@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -577,7 +577,7 @@
status = "disabled";
};
- sdhci@d8000 {
+ sdhci: sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
reg-names = "sdhci", "mbus", "conf-sdio3";
reg = <0xd8000 0x1000>,
--
2.11.0.24.ge6920cf