[PATCH v3 4/4] i2c: allow specify device properties in i2c_board_info

[Dmitry Torokhov]

With many drivers converting to using generic device properties, it is
useful to provide array of device properties when instantiating new i2c
client via i2c_board_info and have them automatically added to the device
in question.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
---
 drivers/i2c/i2c-core.c | 16 +++++++++++++++-
 include/linux/i2c.h    |  3 +++
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index f009549f86a5..3897e78e5e9a 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1335,15 +1335,29 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->dev.fwnode = info->fwnode;
 
 	i2c_dev_set_name(adap, client);
+
+	if (info->properties) {
+		status = device_add_properties(&client->dev, info->properties);
+		if (status) {
+			dev_err(&adap->dev,
+				"Failed to add properties to client %s: %d\n",
+				client->name, status);
+			goto out_err;
+		}
+	}
+
 	status = device_register(&client->dev);
 	if (status)
-		goto out_err;
+		goto out_free_props;
 
 	dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n",
 		client->name, dev_name(&client->dev));
 
 	return client;
 
+out_free_props:
+	if (info->properties)
+		device_remove_properties(&client->dev);
 out_err:
 	dev_err(&adap->dev,
 		"Failed to register i2c client %s at 0x%02x (%d)\n",
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 4aa7d244b38a..ec8f866a5656 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -51,6 +51,7 @@ enum i2c_slave_event;
 typedef int (*i2c_slave_cb_t)(struct i2c_client *, enum i2c_slave_event, u8 *);
 
 struct module;
+struct property_entry;
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 /*
@@ -310,6 +311,7 @@ static inline int i2c_slave_event(struct i2c_client *client,
  * @archdata: copied into i2c_client.dev.archdata
  * @of_node: pointer to OpenFirmware device node
  * @fwnode: device node supplied by the platform firmware
+ * @properties: additional device properties for the device
  * @irq: stored in i2c_client.irq
  *
  * I2C doesn't actually support hardware probing, although controllers and
@@ -331,6 +333,7 @@ struct i2c_board_info {
 	struct dev_archdata	*archdata;
 	struct device_node *of_node;
 	struct fwnode_handle *fwnode;
+	const struct property_entry *properties;
 	int		irq;
 };
 
-- 
2.11.0.483.g087da7b7c-goog