[PATCH v4 0/5] Serial slave device bus
From: Rob Herring
Date: Thu Feb 02 2017 - 14:48:18 EST
Here's V4 of the serdev bus support. Just 2 small fixes from V3 and
Sebastian's Tested-by(Thanks!). I fixed a module build breakage in
serdev.h and dropped setting of receive_room. It was only needed for the
ldisc->receive_buf() function.
There's a few additions Sebastion needed for more serial port control of
RTS/CTS. I think these can be added on top of this series as drivers
need them.
Changelog is in individual patches. Previous versions are here[1][2][3].
This series and the mentioned drivers can be found here[4].
Rob
[1] http://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1304151.html
[2] http://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1311650.html
[3] https://www.mail-archive.com/linux-kernel@xxxxxxxxxxxxxxx/msg1318626.html
[4] git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git serial-bus-v5
Rob Herring (5):
tty_port: Add port client functions
dt/bindings: Add a serial/UART attached device binding
serdev: Introduce new bus for serial attached devices
serdev: add a tty port controller driver
tty_port: register tty ports with serdev bus
.../devicetree/bindings/serial/slave-device.txt | 36 ++
MAINTAINERS | 8 +
drivers/char/Kconfig | 1 +
drivers/tty/Makefile | 1 +
drivers/tty/serdev/Kconfig | 16 +
drivers/tty/serdev/Makefile | 5 +
drivers/tty/serdev/core.c | 421 +++++++++++++++++++++
drivers/tty/serdev/serdev-ttyport.c | 224 +++++++++++
drivers/tty/tty_buffer.c | 17 +-
drivers/tty/tty_port.c | 58 ++-
include/linux/serdev.h | 262 +++++++++++++
include/linux/tty.h | 9 +-
12 files changed, 1037 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/serial/slave-device.txt
create mode 100644 drivers/tty/serdev/Kconfig
create mode 100644 drivers/tty/serdev/Makefile
create mode 100644 drivers/tty/serdev/core.c
create mode 100644 drivers/tty/serdev/serdev-ttyport.c
create mode 100644 include/linux/serdev.h
--
2.10.1