Re: [RFC PATCH] usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver

[Richard Leitner]

Hi Greg,

On 02/03/2017 10:03 AM, Greg KH wrote:
> On Thu, Feb 02, 2017 at 02:44:29PM +0100, Richard Leitner wrote:
>> This patch adds a driver for configuration of the Microchip USB251xB/xBi
>> USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus
>> configuration interface and two to four USB 2.0 downstream ports.
>>
>> Furthermore add myself as a maintainer for this driver.
>>
>> The datasheet can be found at the manufacturers website, see [1]. All
>> device-tree exposed configuration features have been tested on a i.MX6
>> platform with a USB2512B hub.
>>
>> [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00001692C.pdf
>>
>> Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxxxx>
> 
> What is "RFC" about this?  If you don't think it's ready to be merged,
> I'll agree with that and so I've deleted it from my review queue :)

As it's my first patch which adds a new driver I thought (after reading
[1]) a "RFC" would be appropriate. Isn't it?

As stated in the commit message we tested it internally on an i.MX6
platform. Therefore, from my/our point of view, it works as expected and
should be ready to be merged (otherwise I wouldn't have submitted it to
the ML ;-) ).

So how should I proceed here? Re-send it without "RFC"? Wait for some
feedback? Something completely different?

thanks for your feedback/help!

kind regards,
Richard L

[1] https://kernelnewbies.org/PatchTipsAndTricks