[PATCH] net: intel: igb: use new api ethtool_{get|set}_link_ksettings

From: Philippe Reynes
Date: Sun Feb 05 2017 - 12:56:11 EST

Next message: Dmitry Osipenko: "Re: rtlwifi: rtl8192c_common: "BUG: KASAN: slab-out-of-bounds""
Previous message: Larry Finger: "Re: rtlwifi: rtl8192c_common: "BUG: KASAN: slab-out-of-bounds""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
---
drivers/net/ethernet/intel/igb/igb_ethtool.c | 108 ++++++++++++++------------
1 files changed, 59 insertions(+), 49 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 737b664..3e6281a 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -144,7 +144,8 @@ enum igb_diagnostics_results {
};
#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)

-static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+static int igb_get_link_ksettings(struct net_device *netdev,
+ struct ethtool_link_ksettings *cmd)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
@@ -152,11 +153,12 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
struct e1000_sfp_flags *eth_flags = &dev_spec->eth_flags;
u32 status;
u32 speed;
+ u32 supported, advertising;

status = rd32(E1000_STATUS);
if (hw->phy.media_type == e1000_media_type_copper) {

- ecmd->supported = (SUPPORTED_10baseT_Half |
+ supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
@@ -164,63 +166,61 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
SUPPORTED_Autoneg |
SUPPORTED_TP |
SUPPORTED_Pause);
- ecmd->advertising = ADVERTISED_TP;
+ advertising = ADVERTISED_TP;

if (hw->mac.autoneg == 1) {
- ecmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
/* the e1000 autoneg seems to match ethtool nicely */
- ecmd->advertising |= hw->phy.autoneg_advertised;
+ advertising |= hw->phy.autoneg_advertised;
}

- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy.addr;
- ecmd->transceiver = XCVR_INTERNAL;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = hw->phy.addr;
} else {
- ecmd->supported = (SUPPORTED_FIBRE |
+ supported = (SUPPORTED_FIBRE |
SUPPORTED_1000baseKX_Full |
SUPPORTED_Autoneg |
SUPPORTED_Pause);
- ecmd->advertising = (ADVERTISED_FIBRE |
+ advertising = (ADVERTISED_FIBRE |
ADVERTISED_1000baseKX_Full);
if (hw->mac.type == e1000_i354) {
if ((hw->device_id ==
E1000_DEV_ID_I354_BACKPLANE_2_5GBPS) &&
!(status & E1000_STATUS_2P5_SKU_OVER)) {
- ecmd->supported |= SUPPORTED_2500baseX_Full;
- ecmd->supported &=
+ supported |= SUPPORTED_2500baseX_Full;
+ supported &=
~SUPPORTED_1000baseKX_Full;
- ecmd->advertising |= ADVERTISED_2500baseX_Full;
- ecmd->advertising &=
+ advertising |= ADVERTISED_2500baseX_Full;
+ advertising &=
~ADVERTISED_1000baseKX_Full;
}
}
if (eth_flags->e100_base_fx) {
- ecmd->supported |= SUPPORTED_100baseT_Full;
- ecmd->advertising |= ADVERTISED_100baseT_Full;
+ supported |= SUPPORTED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
}
if (hw->mac.autoneg == 1)
- ecmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;

- ecmd->port = PORT_FIBRE;
- ecmd->transceiver = XCVR_EXTERNAL;
+ cmd->base.port = PORT_FIBRE;
}
if (hw->mac.autoneg != 1)
- ecmd->advertising &= ~(ADVERTISED_Pause |
+ advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);

switch (hw->fc.requested_mode) {
case e1000_fc_full:
- ecmd->advertising |= ADVERTISED_Pause;
+ advertising |= ADVERTISED_Pause;
break;
case e1000_fc_rx_pause:
- ecmd->advertising |= (ADVERTISED_Pause |
+ advertising |= (ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
break;
case e1000_fc_tx_pause:
- ecmd->advertising |= ADVERTISED_Asym_Pause;
+ advertising |= ADVERTISED_Asym_Pause;
break;
default:
- ecmd->advertising &= ~(ADVERTISED_Pause |
+ advertising &= ~(ADVERTISED_Pause |
ADVERTISED_Asym_Pause);
}
if (status & E1000_STATUS_LU) {
@@ -236,39 +236,46 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
}
if ((status & E1000_STATUS_FD) ||
hw->phy.media_type != e1000_media_type_copper)
- ecmd->duplex = DUPLEX_FULL;
+ cmd->base.duplex = DUPLEX_FULL;
else
- ecmd->duplex = DUPLEX_HALF;
+ cmd->base.duplex = DUPLEX_HALF;
} else {
speed = SPEED_UNKNOWN;
- ecmd->duplex = DUPLEX_UNKNOWN;
+ cmd->base.duplex = DUPLEX_UNKNOWN;
}
- ethtool_cmd_speed_set(ecmd, speed);
+ cmd->base.speed = speed;
if ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg)
- ecmd->autoneg = AUTONEG_ENABLE;
+ cmd->base.autoneg = AUTONEG_ENABLE;
else
- ecmd->autoneg = AUTONEG_DISABLE;
+ cmd->base.autoneg = AUTONEG_DISABLE;

/* MDI-X => 2; MDI =>1; Invalid =>0 */
if (hw->phy.media_type == e1000_media_type_copper)
- ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ cmd->base.eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
ETH_TP_MDI;
else
- ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+ cmd->base.eth_tp_mdix = ETH_TP_MDI_INVALID;

if (hw->phy.mdix == AUTO_ALL_MODES)
- ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ cmd->base.eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
- ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+ cmd->base.eth_tp_mdix_ctrl = hw->phy.mdix;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);

return 0;
}

-static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+static int igb_set_link_ksettings(struct net_device *netdev,
+ const struct ethtool_link_ksettings *cmd)
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ u32 advertising;

/* When SoL/IDER sessions are active, autoneg/speed/duplex
* cannot be changed
@@ -283,12 +290,12 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
- if (ecmd->eth_tp_mdix_ctrl) {
+ if (cmd->base.eth_tp_mdix_ctrl) {
if (hw->phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;

- if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
- (ecmd->autoneg != AUTONEG_ENABLE)) {
+ if ((cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (cmd->base.autoneg != AUTONEG_ENABLE)) {
dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
@@ -297,10 +304,13 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
usleep_range(1000, 2000);

- if (ecmd->autoneg == AUTONEG_ENABLE) {
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
+
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
if (hw->phy.media_type == e1000_media_type_fiber) {
- hw->phy.autoneg_advertised = ecmd->advertising |
+ hw->phy.autoneg_advertised = advertising |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
switch (adapter->link_speed) {
@@ -320,31 +330,31 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
break;
}
} else {
- hw->phy.autoneg_advertised = ecmd->advertising |
+ hw->phy.autoneg_advertised = advertising |
ADVERTISED_TP |
ADVERTISED_Autoneg;
}
- ecmd->advertising = hw->phy.autoneg_advertised;
+ advertising = hw->phy.autoneg_advertised;
if (adapter->fc_autoneg)
hw->fc.requested_mode = e1000_fc_default;
} else {
- u32 speed = ethtool_cmd_speed(ecmd);
+ u32 speed = cmd->base.speed;
/* calling this overrides forced MDI setting */
- if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ if (igb_set_spd_dplx(adapter, speed, cmd->base.duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
}

/* MDI-X => 2; MDI => 1; Auto => 3 */
- if (ecmd->eth_tp_mdix_ctrl) {
+ if (cmd->base.eth_tp_mdix_ctrl) {
/* fix up the value for auto (3 => 0) as zero is mapped
* internally to auto
*/
- if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ if (cmd->base.eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->phy.mdix = AUTO_ALL_MODES;
else
- hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ hw->phy.mdix = cmd->base.eth_tp_mdix_ctrl;
}

/* reset the link */
@@ -3389,8 +3399,6 @@ static int igb_set_channels(struct net_device *netdev,
}

static const struct ethtool_ops igb_ethtool_ops = {
- .get_settings = igb_get_settings,
- .set_settings = igb_set_settings,
.get_drvinfo = igb_get_drvinfo,
.get_regs_len = igb_get_regs_len,
.get_regs = igb_get_regs,
@@ -3428,6 +3436,8 @@ static int igb_set_channels(struct net_device *netdev,
.set_channels = igb_set_channels,
.begin = igb_ethtool_begin,
.complete = igb_ethtool_complete,
+ .get_link_ksettings = igb_get_link_ksettings,
+ .set_link_ksettings = igb_set_link_ksettings,
};

void igb_set_ethtool_ops(struct net_device *netdev)
--
1.7.4.4

Next message: Dmitry Osipenko: "Re: rtlwifi: rtl8192c_common: "BUG: KASAN: slab-out-of-bounds""
Previous message: Larry Finger: "Re: rtlwifi: rtl8192c_common: "BUG: KASAN: slab-out-of-bounds""
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]