Re: [PATCH v3 3/3] PCI: imx6: Add code to support i.MX7D

From: Lucas Stach
Date: Mon Feb 06 2017 - 10:33:51 EST


Am Montag, den 06.02.2017, 07:17 -0800 schrieb Andrey Smirnov:
> Add various bits of code needed to support i.MX7D variant of the IP.
>
> Cc: yurovsky@xxxxxxxxx
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>

Two small comments inline, otherwise looks real good now.

> ---
> .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 6 +-
> drivers/pci/host/pci-imx6.c | 121 ++++++++++++++++-----
> include/linux/mfd/syscon/imx7-iomuxc-gpr.h | 4 +
> 3 files changed, 105 insertions(+), 26 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index 83aeb1f..9f57759 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -4,7 +4,11 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
> and thus inherits all the common properties defined in designware-pcie.txt.
>
> Required properties:
> -- compatible: "fsl,imx6q-pcie", "fsl,imx6sx-pcie", "fsl,imx6qp-pcie"
> +- compatible:
> + - "fsl,imx6q-pcie"
> + - "fsl,imx6sx-pcie",
> + - "fsl,imx6qp-pcie"
> + - "fsl,imx7d-pcie"
> - reg: base address and length of the PCIe controller
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.

This misses an "Additional required properties for imx7d-pcie" section
listing the required reset handles.

> diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c
> index 3ef8093..34a21c9 100644
> --- a/drivers/pci/host/pci-imx6.c
> +++ b/drivers/pci/host/pci-imx6.c

[...]

> static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> {
> struct pcie_port *pp = &imx6_pcie->pp;
> @@ -381,6 +416,11 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> }
>
> switch (imx6_pcie->variant) {
> + case IMX7D:
> + reset_control_assert(imx6_pcie->apps_reset);

Can this reset assertion be moved into imx6_pcie_assert_core_reset()?
This may change the programming order slightly from the downstream
driver, but I guess that won't hurt if this is the equivalent of the
LTSSM enable signal.

Regards,
Lucas