[PATCH v2] Staging: omap4iss: Fix coding style issues

[Avraham Shukron]

Fixes line-over-80-characters issues as well as multiline comments style.

Signed-off-by: Avraham Shukron <avraham.shukron@xxxxxxxxx>

---
 drivers/staging/media/omap4iss/iss_video.c | 41 ++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index c16927a..42de513 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -128,7 +128,8 @@ static unsigned int iss_video_mbus_to_pix(const struct iss_video *video,
 	pix->width = mbus->width;
 	pix->height = mbus->height;
 
-	/* Skip the last format in the loop so that it will be selected if no
+	/*
+	 * Skip the last format in the loop so that it will be selected if no
 	 * match is found.
 	 */
 	for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) {
@@ -138,7 +139,8 @@ static unsigned int iss_video_mbus_to_pix(const struct iss_video *video,
 
 	min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8;
 
-	/* Clamp the requested bytes per line value. If the maximum bytes per
+	/*
+	 * Clamp the requested bytes per line value. If the maximum bytes per
 	 * line value is zero, the module doesn't support user configurable line
 	 * sizes. Override the requested value with the minimum in that case.
 	 */
@@ -172,7 +174,8 @@ static void iss_video_pix_to_mbus(const struct v4l2_pix_format *pix,
 	mbus->width = pix->width;
 	mbus->height = pix->height;
 
-	/* Skip the last format in the loop so that it will be selected if no
+	/*
+	 * Skip the last format in the loop so that it will be selected if no
 	 * match is found.
 	 */
 	for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) {
@@ -298,7 +301,8 @@ iss_video_check_format(struct iss_video *video, struct iss_video_fh *vfh)
 
 static int iss_video_queue_setup(struct vb2_queue *vq,
 				 unsigned int *count, unsigned int *num_planes,
-				 unsigned int sizes[], struct device *alloc_devs[])
+				 unsigned int sizes[],
+				 struct device *alloc_devs[])
 {
 	struct iss_video_fh *vfh = vb2_get_drv_priv(vq);
 	struct iss_video *video = vfh->video;
@@ -360,7 +364,8 @@ static void iss_video_buf_queue(struct vb2_buffer *vb)
 
 	spin_lock_irqsave(&video->qlock, flags);
 
-	/* Mark the buffer is faulty and give it back to the queue immediately
+	/*
+	 * Mark the buffer is faulty and give it back to the queue immediately
 	 * if the video node has registered an error. vb2 will perform the same
 	 * check when preparing the buffer, but that is inherently racy, so we
 	 * need to handle the race condition with an authoritative check here.
@@ -443,7 +448,8 @@ struct iss_buffer *omap4iss_video_buffer_next(struct iss_video *video)
 
 	buf->vb.vb2_buf.timestamp = ktime_get_ns();
 
-	/* Do frame number propagation only if this is the output video node.
+	/*
+	 * Do frame number propagation only if this is the output video node.
 	 * Frame number either comes from the CSI receivers or it gets
 	 * incremented here if H3A is not active.
 	 * Note: There is no guarantee that the output buffer will finish
@@ -605,7 +611,8 @@ iss_video_set_format(struct file *file, void *fh, struct v4l2_format *format)
 
 	mutex_lock(&video->mutex);
 
-	/* Fill the bytesperline and sizeimage fields by converting to media bus
+	/*
+	 * Fill the bytesperline and sizeimage fields by converting to media bus
 	 * format and back to pixel format.
 	 */
 	iss_video_pix_to_mbus(&format->fmt.pix, &fmt);
@@ -678,8 +685,9 @@ iss_video_get_selection(struct file *file, void *fh, struct v4l2_selection *sel)
 	if (subdev == NULL)
 		return -EINVAL;
 
-	/* Try the get selection operation first and fallback to get format if not
-	 * implemented.
+	/*
+	 * Try the get selection operation first and fallback to get format if
+	 * not implemented.
 	 */
 	sdsel.pad = pad;
 	ret = v4l2_subdev_call(subdev, pad, get_selection, NULL, &sdsel);
@@ -867,7 +875,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 
 	mutex_lock(&video->stream_lock);
 
-	/* Start streaming on the pipeline. No link touching an entity in the
+	/*
+	 * Start streaming on the pipeline. No link touching an entity in the
 	 * pipeline can be activated or deactivated once streaming is started.
 	 */
 	pipe = entity->pipe
@@ -895,7 +904,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	while ((entity = media_entity_graph_walk_next(&graph)))
 		media_entity_enum_set(&pipe->ent_enum, entity);
 
-	/* Verify that the currently configured format matches the output of
+	/*
+	 * Verify that the currently configured format matches the output of
 	 * the connected subdev.
 	 */
 	ret = iss_video_check_format(video, vfh);
@@ -905,7 +915,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	video->bpl_padding = ret;
 	video->bpl_value = vfh->format.fmt.pix.bytesperline;
 
-	/* Find the ISS video node connected at the far end of the pipeline and
+	/*
+	 * Find the ISS video node connected at the far end of the pipeline and
 	 * update the pipeline.
 	 */
 	far_end = iss_video_far_end(video);
@@ -930,7 +941,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	pipe->state |= state;
 	spin_unlock_irqrestore(&pipe->lock, flags);
 
-	/* Set the maximum time per frame as the value requested by userspace.
+	/*
+	 * Set the maximum time per frame as the value requested by userspace.
 	 * This is a soft limit that can be overridden if the hardware doesn't
 	 * support the request limit.
 	 */
@@ -946,7 +958,8 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_iss_video_check_format;
 
-	/* In sensor-to-memory mode, the stream can be started synchronously
+	/*
+	 * In sensor-to-memory mode, the stream can be started synchronously
 	 * to the stream on command. In memory-to-memory mode, it will be
 	 * started when buffers are queued on both the input and output.
 	 */
-- 
2.7.4