[PATCH V2 4/5] thermal: cpu_cooling: Replace dev_warn with dev_err

[Viresh Kumar]

There isn't much the user can do on seeing these warnings, as the
hardware is actually okay. dev_err suits much better here.

Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
---
 drivers/thermal/cpu_cooling.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 85fdbf762fa0..caaaeb3ac0f0 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -435,9 +435,9 @@ static int get_static_power(struct cpufreq_cooling_device *cpufreq_device,
 	dev_pm_opp_put(opp);
 
 	if (voltage == 0) {
-		dev_warn_ratelimited(cpufreq_device->cpu_dev,
-				     "Failed to get voltage for frequency %lu: %ld\n",
-				     freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0);
+		dev_err_ratelimited(cpufreq_device->cpu_dev,
+				    "Failed to get voltage for frequency %lu: %ld\n",
+				    freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0);
 		return -EINVAL;
 	}
 
@@ -721,9 +721,9 @@ static int cpufreq_power2state(struct thermal_cooling_device *cdev,
 
 	*state = cpufreq_cooling_get_level(cpu, target_freq);
 	if (*state == THERMAL_CSTATE_INVALID) {
-		dev_warn_ratelimited(&cdev->device,
-				     "Failed to convert %dKHz for cpu %d into a cdev state\n",
-				     target_freq, cpu);
+		dev_err_ratelimited(&cdev->device,
+				    "Failed to convert %dKHz for cpu %d into a cdev state\n",
+				    target_freq, cpu);
 		return -EINVAL;
 	}
 
-- 
2.7.1.410.g6faf27b