[PATCH v2 08/16] net: stmmac: Use readl_poll_timeout

From: Corentin Labbe
Date: Wed Feb 08 2017 - 03:36:53 EST


The dwmac_dma_reset function use an open coded of readl_poll_timeout().
Replace the open coded handling with the proper function.

Signed-off-by: Corentin Labbe <clabbe.montjoie@xxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
index e4cda39..e60bfca 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c
@@ -17,6 +17,7 @@
*******************************************************************************/

#include <linux/io.h>
+#include <linux/iopoll.h>
#include "common.h"
#include "dwmac_dma.h"

@@ -25,19 +26,16 @@
int dwmac_dma_reset(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
- int limit;
+ int err;

/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
- limit = 10;
- while (limit--) {
- if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
- break;
- mdelay(10);
- }

- if (limit < 0)
+ err = readl_poll_timeout(ioaddr + DMA_BUS_MODE, value,
+ !(value & DMA_BUS_MODE_SFT_RESET),
+ 100000, 10000);
+ if (err)
return -EBUSY;

return 0;
--
2.10.2