Re: [PATCH v2 6/8] mfd: exynos-lpass: Add support for clocks

[Lee Jones]

On Thu, 26 Jan 2017, Marek Szyprowski wrote:

> Exynos LPASS requires some clocks to be enabled to make any access to its
> registers. This patch adds code for handling such clocks. For current set
> of registers it is enough to keep sfr0_ctrl clock enabled. Till now it
> worked only because those clocks were enabled by bootloader and driver
> probe() happened before they were disabled by clock core because of lack
> of users. Handling those clocks is also needed to make it possible to
> enable support for audio power domain.
> 
> This patch requires adding sfr0_ctrl clock to device tree.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/samsung,exynos5433-lpass.txt       |  6 ++++++
>  drivers/mfd/exynos-lpass.c                                     | 10 ++++++++++
>  2 files changed, 16 insertions(+)

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
  
> diff --git a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> index a8deaee82c44..df664018c148 100644
> --- a/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> +++ b/Documentation/devicetree/bindings/mfd/samsung,exynos5433-lpass.txt
> @@ -5,6 +5,10 @@ Required properties:
>   - compatible		: "samsung,exynos5433-lpass"
>   - reg			: should contain the LPASS top SFR region location
>  			  and size
> + - clock-names		: should contain following required clocks: "sfr0_ctrl"
> + - clocks		: should contain clock specifiers of all clocks, which
> +			  input names have been specified in clock-names
> +			  property, in same order.
>   - #address-cells	: should be 1
>   - #size-cells		: should be 1
>   - ranges		: must be present
> @@ -24,6 +28,8 @@ Example:
>  audio-subsystem {
>  	compatible = "samsung,exynos5433-lpass";
>  	reg = <0x11400000 0x100>, <0x11500000 0x08>;
> +	clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
> +	clock-names = "sfr0_ctrl";
>  	#address-cells = <1>;
>  	#size-cells = <1>;
>  	ranges;
> diff --git a/drivers/mfd/exynos-lpass.c b/drivers/mfd/exynos-lpass.c
> index 17915daa2e80..be264988bdc9 100644
> --- a/drivers/mfd/exynos-lpass.c
> +++ b/drivers/mfd/exynos-lpass.c
> @@ -14,6 +14,7 @@
>   * only version 2 as published by the Free Software Foundation.
>   */
>  
> +#include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/io.h>
>  #include <linux/module.h>
> @@ -52,6 +53,7 @@
>  struct exynos_lpass {
>  	/* pointer to the LPASS TOP regmap */
>  	struct regmap *top;
> +	struct clk *sfr0_clk;
>  };
>  
>  static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask)
> @@ -71,6 +73,8 @@ static void exynos_lpass_core_sw_reset(struct exynos_lpass *lpass, int mask)
>  
>  static void exynos_lpass_enable(struct exynos_lpass *lpass)
>  {
> +	clk_prepare_enable(lpass->sfr0_clk);
> +
>  	/* Unmask SFR, DMA and I2S interrupt */
>  	regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK,
>  		     LPASS_INTR_SFR | LPASS_INTR_DMA | LPASS_INTR_I2S);
> @@ -88,6 +92,8 @@ static void exynos_lpass_disable(struct exynos_lpass *lpass)
>  	/* Mask any unmasked IP interrupt sources */
>  	regmap_write(lpass->top, SFR_LPASS_INTR_CPU_MASK, 0);
>  	regmap_write(lpass->top, SFR_LPASS_INTR_CA5_MASK, 0);
> +
> +	clk_disable_unprepare(lpass->sfr0_clk);
>  }
>  
>  static const struct regmap_config exynos_lpass_reg_conf = {
> @@ -114,6 +120,10 @@ static int exynos_lpass_probe(struct platform_device *pdev)
>  	if (IS_ERR(base_top))
>  		return PTR_ERR(base_top);
>  
> +	lpass->sfr0_clk = devm_clk_get(dev, "sfr0_ctrl");
> +	if (IS_ERR(lpass->sfr0_clk))
> +		return PTR_ERR(lpass->sfr0_clk);
> +
>  	lpass->top = regmap_init_mmio(dev, base_top,
>  					&exynos_lpass_reg_conf);
>  	if (IS_ERR(lpass->top)) {

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog