Re: [PATCH v2 3/4] leds: Add LED support for MT6323 PMIC

[Jacek Anaszewski]

Hi Sean,

Thanks for the update. Some nitpicking below.

On 02/08/2017 03:19 AM, sean.wang@xxxxxxxxxxxx wrote:
> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
> 
> MT6323 PMIC is a multi-function device that includes
> LED function. It allows attaching upto 4 LEDs which can

s/upto/up to/

> either be on, off or dimmed and/or blinked with the the
> controller.
> 
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> ---
>  drivers/leds/Kconfig       |   8 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-mt6323.c | 464 +++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 473 insertions(+)
>  create mode 100644 drivers/leds/leds-mt6323.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index c621cbb..30095fc 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -117,6 +117,14 @@ config LEDS_MIKROTIK_RB532
>  	  This option enables support for the so called "User LED" of
>  	  Mikrotik's Routerboard 532.
>  
> +config LEDS_MT6323
> +	tristate "LED Support for Mediatek MT6323 PMIC"
> +	depends on LEDS_CLASS
> +	depends on MFD_MT6397
> +	help
> +	  This option enables support for on-chip LED drivers found on
> +	  Mediatek MT6323 PMIC.
> +
>  config LEDS_S3C24XX
>  	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
>  	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 6b82737..4feb332 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -72,6 +72,7 @@ obj-$(CONFIG_LEDS_IS31FL32XX)		+= leds-is31fl32xx.o
>  obj-$(CONFIG_LEDS_PM8058)		+= leds-pm8058.o
>  obj-$(CONFIG_LEDS_MLXCPLD)		+= leds-mlxcpld.o
>  obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
> +obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
>  
>  # LED SPI Drivers
>  obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-mt6323.c b/drivers/leds/leds-mt6323.c
> new file mode 100644
> index 0000000..f6eeb6c
> --- /dev/null
> +++ b/drivers/leds/leds-mt6323.c
> @@ -0,0 +1,464 @@
> +/*
> + * LED driver for Mediatek MT6323 PMIC
> + *
> + * Copyright (C) 2017 Sean Wang <sean.wang@xxxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +#include <linux/kernel.h>
> +#include <linux/leds.h>
> +#include <linux/mfd/mt6323/registers.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * Register field for MT6323_TOP_CKPDN0 to enable
> + * 32K clock common for LED device

Please put a dot at the and of sentence in case of each comment
starting from capital letter.

> + */
> +#define MT6323_RG_DRV_32K_CK_PDN	BIT(11)
> +#define MT6323_RG_DRV_32K_CK_PDN_MASK	BIT(11)
> +
> +/*
> + * Register field for MT6323_TOP_CKPDN2 to enable
> + * individual clock for LED device
> + */
> +#define MT6323_RG_ISINK_CK_PDN(i)	BIT(i)
> +#define MT6323_RG_ISINK_CK_PDN_MASK(i)	BIT(i)
> +
> +/*
> + * Register field for MT6323_TOP_CKCON1 to select
> + * clock source
> + */
> +#define MT6323_RG_ISINK_CK_SEL_MASK(i)	(BIT(10) << (i))
> +
> +/*
> + * Register for MT6323_ISINK_CON0 to setup the
> + * duty cycle of the blink
> + */
> +#define MT6323_ISINK_CON0(i)		(MT6323_ISINK0_CON0 + 0x8 * (i))
> +#define MT6323_ISINK_DIM_DUTY_MASK	(0x1f << 8)
> +#define MT6323_ISINK_DIM_DUTY(i)	(((i) << 8) & \
> +					MT6323_ISINK_DIM_DUTY_MASK)
> +
> +/*
> + * Register to setup the period of the blink
> + */

This fits in a single line, so can be wrapped with /* */ like :

/* Register to setup the period of the blink */

The same applies to the other similar occurrences.

> +#define MT6323_ISINK_CON1(i)		(MT6323_ISINK0_CON1 + 0x8 * (i))
> +#define MT6323_ISINK_DIM_FSEL_MASK	(0xffff)
> +#define MT6323_ISINK_DIM_FSEL(i)	((i) & MT6323_ISINK_DIM_FSEL_MASK)
> +
> +/*
> + * Register to control the brightness
> + */
> +#define MT6323_ISINK_CON2(i)		(MT6323_ISINK0_CON2 + 0x8 * (i))
> +#define MT6323_ISINK_CH_STEP_SHIFT	12
> +#define MT6323_ISINK_CH_STEP_MASK	(0x7 << 12)
> +#define MT6323_ISINK_CH_STEP(i)		(((i) << 12) & \
> +					MT6323_ISINK_CH_STEP_MASK)
> +#define MT6323_ISINK_SFSTR0_TC_MASK	(0x3 << 1)
> +#define MT6323_ISINK_SFSTR0_TC(i)	(((i) << 1) & \
> +					MT6323_ISINK_SFSTR0_TC_MASK)
> +#define MT6323_ISINK_SFSTR0_EN_MASK	BIT(0)
> +#define MT6323_ISINK_SFSTR0_EN		BIT(0)
> +
> +/*
> + * Register to LED channel enablement
> + */
> +#define MT6323_ISINK_CH_EN_MASK(i)	BIT(i)
> +#define MT6323_ISINK_CH_EN(i)		BIT(i)
> +
> +#define MTK_MAX_PERIOD		      10000
> +#define MTK_MAX_DEVICES			  4

s/MAX_DEVICES/MAX_LEDS/

> +#define MTK_MAX_BRIGHTNESS		  6
> +#define MTK_UNIT_DUTY		       3125

Why MTK and not MT6323?

> +
> +struct mtk_leds;

Similarly - let's turn it to struct mt6323_leds.

> +
> +/**
> + * struct mtk_led - state container for the LED device
> + * @id: the identifier in MT6323 LED device
> + * @parent: the pointer to MT6323 LED controller
> + * @cdev: LED class device for this LED device
> + * @current_brightness: current state of the LED device
> + */
> +struct mtk_led {

struct mt6323_led

> +	int    id;
> +	struct mtk_leds *parent;
> +	struct led_classdev cdev;
> +	u8 current_brightness;
> +};
> +
> +/**
> + * struct mtk_leds -	state container for holding LED controller
> + *			of the driver
> + * @dev:		The device pointer

Begin the property description with lowercase, like you're doing it
in case of struct mtk_led above.

> + * @hw:			The underlying hardware providing shared
> + *			bus for the register operations
> + * @led_num:		How much the LED device the controller could control
> + * @lock:		The lock among process context
> + * @led:		The array that contains the state of individual
> + *			LED device
> + */
> +struct mtk_leds {
> +	struct device	*dev;
> +	struct mt6397_chip *hw;
> +	u8     led_num;
> +	/* protect among process context */
> +	struct mutex	 lock;
> +	struct mtk_led	 led[MTK_MAX_DEVICES];
> +};
> +
> +static int mtk_led_hw_off(struct led_classdev *cdev)

Please switch namespacing prefix of all functions from mtk to mt6323.

> +{
> +	struct mtk_led *led = container_of(cdev, struct mtk_led, cdev);
> +	struct mtk_leds *leds = led->parent;
> +	struct regmap *regmap = leds->hw->regmap;
> +	unsigned int status;
> +	int ret;
> +
> +	status = MT6323_ISINK_CH_EN(led->id);
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
> +				 MT6323_ISINK_CH_EN_MASK(led->id), ~status);
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(100, 300);
> +	ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
> +				 MT6323_RG_ISINK_CK_PDN_MASK(led->id),
> +				 MT6323_RG_ISINK_CK_PDN(led->id));
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static int get_mtk_led_hw_brightness(struct led_classdev *cdev)

mt6323_get_led_hw_brightness

> +{
> +	struct mtk_led *led = container_of(cdev, struct mtk_led, cdev);
> +	struct mtk_leds *leds = led->parent;
> +	struct regmap *regmap = leds->hw->regmap;
> +	unsigned int status;
> +	int ret;
> +
> +	ret = regmap_read(regmap, MT6323_TOP_CKPDN2, &status);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (status & MT6323_RG_ISINK_CK_PDN_MASK(led->id))
> +		return 0;
> +
> +	ret = regmap_read(regmap, MT6323_ISINK_EN_CTRL, &status);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (!(status & MT6323_ISINK_CH_EN(led->id)))
> +		return 0;
> +
> +	ret = regmap_read(regmap, MT6323_ISINK_CON2(led->id), &status);
> +	if (ret < 0)
> +		return ret;
> +
> +	return  ((status & MT6323_ISINK_CH_STEP_MASK)
> +		  >> MT6323_ISINK_CH_STEP_SHIFT) + 1;
> +}
> +
> +static int mtk_led_hw_on(struct led_classdev *cdev)
> +{
> +	struct mtk_led *led = container_of(cdev, struct mtk_led, cdev);
> +	struct mtk_leds *leds = led->parent;
> +	struct regmap *regmap = leds->hw->regmap;
> +	unsigned int status;
> +	int ret;
> +
> +	/*
> +	 * Setup required clock source, enable the corresponding
> +	 * clock and channel and let work with continuous blink as
> +	 * the default
> +	 */
> +	ret = regmap_update_bits(regmap, MT6323_TOP_CKCON1,
> +				 MT6323_RG_ISINK_CK_SEL_MASK(led->id), 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	status = MT6323_RG_ISINK_CK_PDN(led->id);
> +	ret = regmap_update_bits(regmap, MT6323_TOP_CKPDN2,
> +				 MT6323_RG_ISINK_CK_PDN_MASK(led->id),
> +				 ~status);
> +	if (ret < 0)
> +		return ret;
> +
> +	usleep_range(100, 300);
> +
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_EN_CTRL,
> +				 MT6323_ISINK_CH_EN_MASK(led->id),
> +				 MT6323_ISINK_CH_EN(led->id));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
> +				 MT6323_ISINK_CH_STEP_MASK,
> +				 MT6323_ISINK_CH_STEP(1));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
> +				 MT6323_ISINK_DIM_DUTY_MASK,
> +				 MT6323_ISINK_DIM_DUTY(31));
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
> +				 MT6323_ISINK_DIM_FSEL_MASK,
> +				 MT6323_ISINK_DIM_FSEL(1000));
> +	if (ret < 0)
> +		return ret;
> +
> +	led->current_brightness = 1;
> +
> +	return 0;
> +}
> +
> +static int mtk_led_set_blink(struct led_classdev *cdev,
> +			     unsigned long *delay_on,
> +			     unsigned long *delay_off)
> +{
> +	struct mtk_led *led = container_of(cdev, struct mtk_led, cdev);
> +	struct mtk_leds *leds = led->parent;
> +	struct regmap *regmap = leds->hw->regmap;
> +	u16 period;
> +	u8 duty_cycle, duty_hw;
> +	int ret;
> +
> +	/*
> +	 * Units are in ms , if over the hardware able

s/ms ,/ms,/

> +	 * to support, fallback into software blink
> +	 */
> +	if (*delay_on + *delay_off > MTK_MAX_PERIOD)
> +		return -EINVAL;
> +
> +	/*
> +	 * LED subsystem requires a default user
> +	 * friendly blink pattern for the LED so using
> +	 * 1Hz duty cycle 50% here if without specific
> +	 * value delay_on and delay off being assigned
> +	 */
> +	if (*delay_on == 0 && *delay_off == 0) {
> +		*delay_on = 500;
> +		*delay_off = 500;
> +	}
> +
> +	period = *delay_on + *delay_off;
> +
> +	/*
> +	 * duty_cycle is the percentage of period during
> +	 * which the led is ON
> +	 */
> +	duty_cycle = 100 * (*delay_on) / period;
> +
> +	mutex_lock(&leds->lock);
> +
> +	if (!led->current_brightness) {
> +		ret = mtk_led_hw_on(cdev);
> +		if (ret < 0)
> +			goto out;
> +	}
> +
> +	duty_hw = DIV_ROUND_CLOSEST(duty_cycle * 1000, MTK_UNIT_DUTY);
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_CON0(led->id),
> +				 MT6323_ISINK_DIM_DUTY_MASK,
> +				 MT6323_ISINK_DIM_DUTY(duty_hw));
> +	if (ret < 0)
> +		goto out;
> +
> +	ret = regmap_update_bits(regmap, MT6323_ISINK_CON1(led->id),
> +				 MT6323_ISINK_DIM_FSEL_MASK,
> +				 MT6323_ISINK_DIM_FSEL(period - 1));
> +out:
> +	mutex_unlock(&leds->lock);
> +
> +	return ret;
> +}
> +
> +static int mtk_led_set_brightness(struct led_classdev *cdev,
> +				  enum led_brightness brightness)
> +{
> +	struct mtk_led *led = container_of(cdev, struct mtk_led, cdev);
> +	struct mtk_leds *leds = led->parent;
> +	struct regmap *regmap = leds->hw->regmap;
> +	int ret;
> +
> +	mutex_lock(&leds->lock);
> +
> +	if (!led->current_brightness && brightness) {
> +		ret = mtk_led_hw_on(cdev);
> +		if (ret < 0)
> +			goto out;
> +	}
> +
> +	if (brightness) {
> +		/*
> +		 * Setup current output for the corresponding
> +		 * brightness level
> +		 */
> +		ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
> +					 MT6323_ISINK_CH_STEP_MASK,
> +					 MT6323_ISINK_CH_STEP(brightness - 1));
> +		if (ret < 0)
> +			goto out;
> +
> +		ret = regmap_update_bits(regmap, MT6323_ISINK_CON2(led->id),
> +					 MT6323_ISINK_SFSTR0_TC_MASK |
> +					 MT6323_ISINK_SFSTR0_EN_MASK,
> +					 MT6323_ISINK_SFSTR0_TC(2) |
> +					 MT6323_ISINK_SFSTR0_EN);
> +		if (ret < 0)
> +			goto out;
> +	} else {
> +		ret = mtk_led_hw_off(cdev);
> +		if (ret < 0)
> +			goto out;
> +	}
> +
> +	led->current_brightness = brightness;
> +out:
> +	mutex_unlock(&leds->lock);
> +
> +	return ret;
> +}
> +
> +static int mt6323_led_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = pdev->dev.of_node;
> +	struct device_node *child;
> +	struct mt6397_chip *hw = dev_get_drvdata(pdev->dev.parent);
> +	struct mtk_leds *leds;
> +	int ret, i = 0, count;
> +	const char *state;
> +	unsigned int status;
> +
> +	count = of_get_child_count(np);
> +	if (!count)
> +		return -ENODEV;
> +
> +	/*
> +	 * The number the LEDs on MT6323 could be support is
> +	 * up to MTK_MAX_DEVICES
> +	 */

We're going to change the macro name to MT6323_MAX_LEDS - it will be
self-explanatory then, and the comment will be redundant here.

> +	count = (count <= MTK_MAX_DEVICES) ? count : MTK_MAX_DEVICES;
> +
> +	leds = devm_kzalloc(dev, sizeof(struct mtk_leds) +
> +			    sizeof(struct mtk_led) * count,
> +			    GFP_KERNEL);
> +	if (!leds)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, leds);
> +	leds->dev = dev;
> +
> +	/*
> +	 * leds->hw points to the underlying bus for the register
> +	 * controlled
> +	 */
> +	leds->hw = hw;
> +	mutex_init(&leds->lock);
> +	leds->led_num = count;
> +
> +	status = MT6323_RG_DRV_32K_CK_PDN;
> +	ret = regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
> +				 MT6323_RG_DRV_32K_CK_PDN_MASK, ~status);
> +	if (ret < 0) {
> +		dev_err(leds->dev,
> +			"Failed to update MT6323_TOP_CKPDN0 Register\n");
> +		return ret;
> +	}
> +
> +	for_each_available_child_of_node(np, child) {
> +		leds->led[i].cdev.name =
> +			of_get_property(child, "label", NULL) ? :
> +					child->name;
> +		leds->led[i].cdev.default_trigger = of_get_property(child,
> +						    "linux,default-trigger",
> +						    NULL);
> +		leds->led[i].cdev.max_brightness = MTK_MAX_BRIGHTNESS;
> +		leds->led[i].cdev.brightness_set_blocking =
> +					mtk_led_set_brightness;
> +		leds->led[i].cdev.blink_set = mtk_led_set_blink;
> +		leds->led[i].id = i;
> +		leds->led[i].parent = leds;
> +		state = of_get_property(child, "default-state", NULL);
> +		if (state) {
> +			if (!strcmp(state, "keep")) {
> +				leds->led[i].current_brightness =
> +				get_mtk_led_hw_brightness(&leds->led[i].cdev);
> +			} else if (!strcmp(state, "on")) {
> +				mtk_led_set_brightness(&leds->led[i].cdev, 1);
> +			} else  {
> +				mtk_led_set_brightness(&leds->led[i].cdev,
> +						       0);
> +			}
> +		}
> +		ret = devm_led_classdev_register(dev, &leds->led[i].cdev);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to register LED: %d\n",
> +				ret);
> +			return ret;
> +		}
> +		leds->led[i].cdev.dev->of_node = child;
> +		i++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int mt6323_led_remove(struct platform_device *pdev)
> +{
> +	struct mtk_leds *leds = platform_get_drvdata(pdev);
> +	int i;
> +
> +	/*
> +	 * Turned the LED to OFF state on driver removal

How about:

/* Turn the LEDs off on driver removal. */


> +	 */
> +	for (i = 0 ; i < leds->led_num ; i++)
> +		mtk_led_hw_off(&leds->led[i].cdev);
> +
> +	regmap_update_bits(leds->hw->regmap, MT6323_TOP_CKPDN0,
> +			   MT6323_RG_DRV_32K_CK_PDN_MASK,
> +			   MT6323_RG_DRV_32K_CK_PDN);
> +
> +	mutex_destroy(&leds->lock);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_led_dt_match[] = {
> +	{ .compatible = "mediatek,mt6323-led" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_led_dt_match);
> +
> +static struct platform_driver mt6323_led_driver = {
> +	.probe		= mt6323_led_probe,
> +	.remove		= mt6323_led_remove,
> +	.driver		= {
> +		.name	= "mt6323-led",
> +		.of_match_table = mt6323_led_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_led_driver);
> +
> +MODULE_DESCRIPTION("LED driver for Mediatek MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@xxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> 

-- 
Best regards,
Jacek Anaszewski