[PATCH] net: micrel: ks8695net: use new api ethtool_{get|set}_link_ksettings

From: Philippe Reynes
Date: Wed Feb 08 2017 - 17:56:49 EST

Next message: Rob Herring: "Re: [PATCH V2 1/2] dt-bindings: add Asus Tinker board"
Previous message: Pavel Machek: "Re: [PATCH] devicetree: Add video bus switch"
Next in thread: David Miller: "Re: [PATCH] net: micrel: ks8695net: use new api ethtool_{get|set}_link_ksettings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

As I don't have the hardware, I'd be very pleased if
someone may test this patch.

Signed-off-by: Philippe Reynes <tremyfr@xxxxxxxxx>
---
drivers/net/ethernet/micrel/ks8695net.c | 91 +++++++++++++++++--------------
1 files changed, 50 insertions(+), 41 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8695net.c b/drivers/net/ethernet/micrel/ks8695net.c
index d210615..bd51e05 100644
--- a/drivers/net/ethernet/micrel/ks8695net.c
+++ b/drivers/net/ethernet/micrel/ks8695net.c
@@ -854,85 +854,94 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
}

/**
- * ks8695_wan_get_settings - Get device-specific settings.
+ * ks8695_wan_get_link_ksettings - Get device-specific settings.
* @ndev: The network device to read settings from
* @cmd: The ethtool structure to read into
*/
static int
-ks8695_wan_get_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_get_link_ksettings(struct net_device *ndev,
+ struct ethtool_link_ksettings *cmd)
{
struct ks8695_priv *ksp = netdev_priv(ndev);
u32 ctrl;
+ u32 supported, advertising;

/* All ports on the KS8695 support these... */
- cmd->supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
+ supported = (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
SUPPORTED_TP | SUPPORTED_MII);
- cmd->transceiver = XCVR_INTERNAL;

- cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
- cmd->port = PORT_MII;
- cmd->supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
- cmd->phy_address = 0;
+ advertising = ADVERTISED_TP | ADVERTISED_MII;
+ cmd->base.port = PORT_MII;
+ supported |= (SUPPORTED_Autoneg | SUPPORTED_Pause);
+ cmd->base.phy_address = 0;

ctrl = readl(ksp->phyiface_regs + KS8695_WMC);
if ((ctrl & WMC_WAND) == 0) {
/* auto-negotiation is enabled */
- cmd->advertising |= ADVERTISED_Autoneg;
+ advertising |= ADVERTISED_Autoneg;
if (ctrl & WMC_WANA100F)
- cmd->advertising |= ADVERTISED_100baseT_Full;
+ advertising |= ADVERTISED_100baseT_Full;
if (ctrl & WMC_WANA100H)
- cmd->advertising |= ADVERTISED_100baseT_Half;
+ advertising |= ADVERTISED_100baseT_Half;
if (ctrl & WMC_WANA10F)
- cmd->advertising |= ADVERTISED_10baseT_Full;
+ advertising |= ADVERTISED_10baseT_Full;
if (ctrl & WMC_WANA10H)
- cmd->advertising |= ADVERTISED_10baseT_Half;
+ advertising |= ADVERTISED_10baseT_Half;
if (ctrl & WMC_WANAP)
- cmd->advertising |= ADVERTISED_Pause;
- cmd->autoneg = AUTONEG_ENABLE;
+ advertising |= ADVERTISED_Pause;
+ cmd->base.autoneg = AUTONEG_ENABLE;

- ethtool_cmd_speed_set(cmd,
- (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10);
- cmd->duplex = (ctrl & WMC_WDS) ?
+ cmd->base.speed = (ctrl & WMC_WSS) ? SPEED_100 : SPEED_10;
+ cmd->base.duplex = (ctrl & WMC_WDS) ?
DUPLEX_FULL : DUPLEX_HALF;
} else {
/* auto-negotiation is disabled */
- cmd->autoneg = AUTONEG_DISABLE;
+ cmd->base.autoneg = AUTONEG_DISABLE;

- ethtool_cmd_speed_set(cmd, ((ctrl & WMC_WANF100) ?
- SPEED_100 : SPEED_10));
- cmd->duplex = (ctrl & WMC_WANFF) ?
+ cmd->base.speed = (ctrl & WMC_WANF100) ?
+ SPEED_100 : SPEED_10;
+ cmd->base.duplex = (ctrl & WMC_WANFF) ?
DUPLEX_FULL : DUPLEX_HALF;
}

+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}

/**
- * ks8695_wan_set_settings - Set device-specific settings.
+ * ks8695_wan_set_link_ksettings - Set device-specific settings.
* @ndev: The network device to configure
* @cmd: The settings to configure
*/
static int
-ks8695_wan_set_settings(struct net_device *ndev, struct ethtool_cmd *cmd)
+ks8695_wan_set_link_ksettings(struct net_device *ndev,
+ const struct ethtool_link_ksettings *cmd)
{
struct ks8695_priv *ksp = netdev_priv(ndev);
u32 ctrl;
+ u32 advertising;

- if ((cmd->speed != SPEED_10) && (cmd->speed != SPEED_100))
- return -EINVAL;
- if ((cmd->duplex != DUPLEX_HALF) && (cmd->duplex != DUPLEX_FULL))
+ ethtool_convert_link_mode_to_legacy_u32(&advertising,
+ cmd->link_modes.advertising);
+
+ if ((cmd->base.speed != SPEED_10) && (cmd->base.speed != SPEED_100))
return -EINVAL;
- if (cmd->port != PORT_MII)
+ if ((cmd->base.duplex != DUPLEX_HALF) &&
+ (cmd->base.duplex != DUPLEX_FULL))
return -EINVAL;
- if (cmd->transceiver != XCVR_INTERNAL)
+ if (cmd->base.port != PORT_MII)
return -EINVAL;
- if ((cmd->autoneg != AUTONEG_DISABLE) &&
- (cmd->autoneg != AUTONEG_ENABLE))
+ if ((cmd->base.autoneg != AUTONEG_DISABLE) &&
+ (cmd->base.autoneg != AUTONEG_ENABLE))
return -EINVAL;

- if (cmd->autoneg == AUTONEG_ENABLE) {
- if ((cmd->advertising & (ADVERTISED_10baseT_Half |
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ if ((advertising & (ADVERTISED_10baseT_Half |
ADVERTISED_10baseT_Full |
ADVERTISED_100baseT_Half |
ADVERTISED_100baseT_Full)) == 0)
@@ -942,13 +951,13 @@ static int ks8695_poll(struct napi_struct *napi, int budget)

ctrl &= ~(WMC_WAND | WMC_WANA100F | WMC_WANA100H |
WMC_WANA10F | WMC_WANA10H);
- if (cmd->advertising & ADVERTISED_100baseT_Full)
+ if (advertising & ADVERTISED_100baseT_Full)
ctrl |= WMC_WANA100F;
- if (cmd->advertising & ADVERTISED_100baseT_Half)
+ if (advertising & ADVERTISED_100baseT_Half)
ctrl |= WMC_WANA100H;
- if (cmd->advertising & ADVERTISED_10baseT_Full)
+ if (advertising & ADVERTISED_10baseT_Full)
ctrl |= WMC_WANA10F;
- if (cmd->advertising & ADVERTISED_10baseT_Half)
+ if (advertising & ADVERTISED_10baseT_Half)
ctrl |= WMC_WANA10H;

/* force a re-negotiation */
@@ -961,9 +970,9 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
ctrl |= WMC_WAND;
ctrl &= ~(WMC_WANF100 | WMC_WANFF);

- if (cmd->speed == SPEED_100)
+ if (cmd->base.speed == SPEED_100)
ctrl |= WMC_WANF100;
- if (cmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
ctrl |= WMC_WANFF;

writel(ctrl, ksp->phyiface_regs + KS8695_WMC);
@@ -1042,12 +1051,12 @@ static int ks8695_poll(struct napi_struct *napi, int budget)
static const struct ethtool_ops ks8695_wan_ethtool_ops = {
.get_msglevel = ks8695_get_msglevel,
.set_msglevel = ks8695_set_msglevel,
- .get_settings = ks8695_wan_get_settings,
- .set_settings = ks8695_wan_set_settings,
.nway_reset = ks8695_wan_nwayreset,
.get_link = ethtool_op_get_link,
.get_pauseparam = ks8695_wan_get_pause,
.get_drvinfo = ks8695_get_drvinfo,
+ .get_link_ksettings = ks8695_wan_get_link_ksettings,
+ .set_link_ksettings = ks8695_wan_set_link_ksettings,
};

/* Network device interface functions */
--
1.7.4.4

Next message: Rob Herring: "Re: [PATCH V2 1/2] dt-bindings: add Asus Tinker board"
Previous message: Pavel Machek: "Re: [PATCH] devicetree: Add video bus switch"
Next in thread: David Miller: "Re: [PATCH] net: micrel: ks8695net: use new api ethtool_{get|set}_link_ksettings"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]