Re: [PATCHv3] arm: ftrace: Adds support for CONFIG_DYNAMIC_FTRACE_WITH_REGS

[Abel Vesa]

On Thu, Feb 09, 2017 at 04:29:56PM +0000, Russell King - ARM Linux wrote:
> On Tue, Feb 07, 2017 at 10:57:55PM +0000, Abel Vesa wrote:
> > +#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
> > +
> > +.macro __ftrace_regs_caller
> > +
> > +	add 	ip, sp, #4	@ move in IP the value of SP as it was
> > +				@ before the push {lr} of the mcount mechanism
> > +	stmdb	sp!, {ip,lr,pc}
> > +	stmdb	sp!, {r0-r11,lr}
> > +
> > +	@ stack content at this point:
> > +	@ 0  4          44    48   52       56   60   64
> > +	@ R0 | R1 | ... | R11 | LR | SP + 4 | LR | PC | previous LR |
> 
> How important is this to be close to "struct pt_regs" ?  Do we care about
> r12 being "wrong" ?  The other issue is that pt_regs is actually 72
> bytes in size, not 68 bytes.  So, does that mean we end up inappropriately
> leaking some of the kernel stack to userspace through ftrace?
You are right. pt_regs is 72 (due to old_r0, AFAIU). The risk is actually to
corrupt the stack if any ftrace_call implementation is writing to pt_regs->uregs[i],
where i >= 16 (at this point). A solution would be to decrement the SP with 4
at the beginning of ftrace_regs_caller, this way ensuring that every ftrace_call
implementation gets to play with the whole size of pt_regs. Will take this into
consideration in the next iteration.
> 
> It's possible to save all the registers like this if we need to provide
> a complete picture of the register set at function entry:
> 
> 	str	ip, [sp, #-16]!
> 	add	ip, sp, #20
> 	stmia	sp, {ip, lr, pc}
> 	stmdb	sp!, {r0 - r11}
> 
> However, is that even correct - don't we want pt_regs' LR and PC to be
> related to the function call itself?  The "previous LR" as you describe
> it is where the called function (the one that is being traced) will
> return to.  The current LR at this point is the address within the
> traced function.  So actually I think this is more strictly correct, if
> I'm understanding the intention here correctly:
> 
> 	str	ip, [sp, #S_IP - PT_REGS_SIZE]!	@ save current IP
> 	ldr	ip, [sp, #PT_REGS_SIZE - S_IP]	@ get LR at traced function entry
> 	str	lr, [sp, #S_PC - S_IP]		@ save current LR as PC
> 	str	ip, [sp, #S_LR - S_IP]		@ save traced function return
> 	add	ip, sp, #PT_REGS_SIZE - S_IP + 4
> 	str	ip, [sp, #S_SP - SP_IP]		@ save stack pointer at function entry
> 	stmdb	sp!, {r0 - r11}
> 	@ clear CPSR and old_r0 words
> 	mov	r3, #0
> 	str	r3, [sp, #S_PSR]
> 	str	r3, [sp, #S_OLD_R0]
> 
> However, that has the side effect of misaligning the stack (the stack
> needs to be aligned to 8 bytes).  So, if we decide we don't care about
> the saved LR value (except as a mechanism to preserve it across the
> call into the ftrace code):
> 
The solution proposed upwards will take care of the stack alignment as well.
Again, LR needed by ftrace_graph_caller/ftrace_regs_graph_caller.
> 	str	ip, [sp, #S_IP - PT_REGS_SIZE + 4]!
> 	str	lr, [sp, #S_PC - S_IP]
> 	ldr	lr, [sp, #PT_REGS_SIZE - 4 - S_IP]
> 	add	ip, sp, #PT_REGS_SIZE - S_IP
> 	stmib	sp, {ip, lr}
> 	stmdb	sp!, {r0 - r11}
> 	@ clear CPSR and old_r0 words
> 	mov	r3, #0
> 	str	r3, [sp, #S_PSR]
> 	str	r3, [sp, #S_OLD_R0]
> 
> and the return would be:
> 
> 	ldmia	sp, {r0 - pc}
> 
> That all said - maybe someone from the ftrace community can comment on
> how much of pt_regs is actually necessary here?
> 
> -- 
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.