Re: [PATCH v4 1/2] staging: omap4iss: fix multiline comment style

From: Laurent Pinchart
Date: Fri Feb 10 2017 - 02:57:02 EST


Hi Avraham,

Thank you for the patches.

On Thursday 09 Feb 2017 18:57:55 Avraham Shukron wrote:
> Fixed multi-line comments to their preferred style (First line empty)
>
> Signed-off-by: Avraham Shukron <avraham.shukron@xxxxxxxxx>

For both of them,

Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

I've applied the patches to my tree and will send a pull request for v4.12.

> ---
> drivers/staging/media/omap4iss/iss_video.c | 38 ++++++++++++++++++---------
> 1 file changed, 25 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/staging/media/omap4iss/iss_video.c
> b/drivers/staging/media/omap4iss/iss_video.c index bb0e3b4..e21811a 100644
> --- a/drivers/staging/media/omap4iss/iss_video.c
> +++ b/drivers/staging/media/omap4iss/iss_video.c
> @@ -128,7 +128,8 @@ static unsigned int iss_video_mbus_to_pix(const struct
> iss_video *video, pix->width = mbus->width;
> pix->height = mbus->height;
>
> - /* Skip the last format in the loop so that it will be selected if no
> + /*
> + * Skip the last format in the loop so that it will be selected if no
> * match is found.
> */
> for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) {
> @@ -138,7 +139,8 @@ static unsigned int iss_video_mbus_to_pix(const struct
> iss_video *video,
>
> min_bpl = pix->width * ALIGN(formats[i].bpp, 8) / 8;
>
> - /* Clamp the requested bytes per line value. If the maximum bytes per
> + /*
> + * Clamp the requested bytes per line value. If the maximum bytes per
> * line value is zero, the module doesn't support user configurable
line
> * sizes. Override the requested value with the minimum in that case.
> */
> @@ -172,7 +174,8 @@ static void iss_video_pix_to_mbus(const struct
> v4l2_pix_format *pix, mbus->width = pix->width;
> mbus->height = pix->height;
>
> - /* Skip the last format in the loop so that it will be selected if no
> + /*
> + * Skip the last format in the loop so that it will be selected if no
> * match is found.
> */
> for (i = 0; i < ARRAY_SIZE(formats) - 1; ++i) {
> @@ -360,7 +363,8 @@ static void iss_video_buf_queue(struct vb2_buffer *vb)
>
> spin_lock_irqsave(&video->qlock, flags);
>
> - /* Mark the buffer is faulty and give it back to the queue immediately
> + /*
> + * Mark the buffer is faulty and give it back to the queue immediately
> * if the video node has registered an error. vb2 will perform the
same
> * check when preparing the buffer, but that is inherently racy, so we
> * need to handle the race condition with an authoritative check here.
> @@ -443,7 +447,8 @@ struct iss_buffer *omap4iss_video_buffer_next(struct
> iss_video *video)
>
> buf->vb.vb2_buf.timestamp = ktime_get_ns();
>
> - /* Do frame number propagation only if this is the output video node.
> + /*
> + * Do frame number propagation only if this is the output video node.
> * Frame number either comes from the CSI receivers or it gets
> * incremented here if H3A is not active.
> * Note: There is no guarantee that the output buffer will finish
> @@ -605,7 +610,8 @@ iss_video_set_format(struct file *file, void *fh, struct
> v4l2_format *format)
>
> mutex_lock(&video->mutex);
>
> - /* Fill the bytesperline and sizeimage fields by converting to media
bus
> + /*
> + * Fill the bytesperline and sizeimage fields by converting to media
bus
> * format and back to pixel format.
> */
> iss_video_pix_to_mbus(&format->fmt.pix, &fmt);
> @@ -678,8 +684,9 @@ iss_video_get_selection(struct file *file, void *fh,
> struct v4l2_selection *sel) if (subdev == NULL)
> return -EINVAL;
>
> - /* Try the get selection operation first and fallback to get format if
not
> - * implemented.
> + /*
> + * Try the get selection operation first and fallback to get format if
> + * not implemented.
> */
> sdsel.pad = pad;
> ret = v4l2_subdev_call(subdev, pad, get_selection, NULL, &sdsel);
> @@ -867,7 +874,8 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type)
>
> mutex_lock(&video->stream_lock);
>
> - /* Start streaming on the pipeline. No link touching an entity in the
> + /*
> + * Start streaming on the pipeline. No link touching an entity in the
> * pipeline can be activated or deactivated once streaming is started.
> */
> pipe = entity->pipe
> @@ -895,7 +903,8 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) while ((entity = media_graph_walk_next(&graph)))
> media_entity_enum_set(&pipe->ent_enum, entity);
>
> - /* Verify that the currently configured format matches the output of
> + /*
> + * Verify that the currently configured format matches the output of
> * the connected subdev.
> */
> ret = iss_video_check_format(video, vfh);
> @@ -905,7 +914,8 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) video->bpl_padding = ret;
> video->bpl_value = vfh->format.fmt.pix.bytesperline;
>
> - /* Find the ISS video node connected at the far end of the pipeline
and
> + /*
> + * Find the ISS video node connected at the far end of the pipeline
and
> * update the pipeline.
> */
> far_end = iss_video_far_end(video);
> @@ -930,7 +940,8 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) pipe->state |= state;
> spin_unlock_irqrestore(&pipe->lock, flags);
>
> - /* Set the maximum time per frame as the value requested by userspace.
> + /*
> + * Set the maximum time per frame as the value requested by userspace.
> * This is a soft limit that can be overridden if the hardware doesn't
> * support the request limit.
> */
> @@ -946,7 +957,8 @@ iss_video_streamon(struct file *file, void *fh, enum
> v4l2_buf_type type) if (ret < 0)
> goto err_iss_video_check_format;
>
> - /* In sensor-to-memory mode, the stream can be started synchronously
> + /*
> + * In sensor-to-memory mode, the stream can be started synchronously
> * to the stream on command. In memory-to-memory mode, it will be
> * started when buffers are queued on both the input and output.
> */

--
Regards,

Laurent Pinchart